Industrial Asset Armor & Heavy Fleet Protection
High-Impact, UV-Stable Protective Spray Coatings
Abrasion-resistant, UV-stable aliphatic polyurea armor coatings engineered for Ontario’s toughest industrial environments. We protect mining equipment, aggregate dump trucks, municipal salt spreaders, outdoor steel storage silos, and heavy commercial fleets — extending asset life by decades and dramatically reducing maintenance costs.
Our Canadian Suppliers, Partners, Clients & Credentials
What Happens When Industrial Assets Go Unprotected
Why Ontario’s Fleet Operators Choose Polyurea Armor Coatings
Extreme Impact & Abrasion Resistance
High-build polyurea coatings absorb and distribute impact energy from rocks, aggregate, and heavy loads — preventing penetration and denting of the steel substrate. Taber abrasion loss of <25mg demonstrates exceptional wear resistance for continuous heavy-load applications.
UV-Stable Aliphatic Finish — No Yellowing or Chalking
Elastochem SwiftTop TC 446 uses aliphatic chemistry that is inherently UV-stable. Unlike standard aromatic polyurea that yellows and chalks within 1-3 years, aliphatic systems maintain color, gloss, and protective properties for 10-15+ years in full sun exposure.
Complete Corrosion Barrier
Seamless polyurea membrane completely isolates the steel substrate from moisture, salt, chemicals, and atmospheric corrosion. Zero permeability means zero rust — even in Ontario’s aggressive salt-spray winter environment.
Rapid Application — Minimize Fleet Downtime
Polyurea sets tack-free in seconds and achieves full mechanical properties within 24 hours. Most truck boxes and equipment are coated and returned to service within 1-2 days — dramatically reducing fleet downtime compared to multi-coat paint systems.




How We Armor Your Industrial Assets
Asset Evaluation & Coating Specification
We evaluate the equipment, identify wear patterns, impact zones, and chemical exposure. Coating specification selected based on service conditions: impact severity, chemical exposure, UV requirements, and desired thickness.
Surface Preparation — The Foundation
Steel surfaces abrasive blasted to SSPC-SP6 (Commercial Blast) or SP10 (Near-White Blast) to remove all rust, scale, and contaminants. Surface profile verified at 2-4 mils for optimal adhesion. Weld seams ground smooth.
Primer Application
Corrosion-inhibitive primer applied to blasted steel within 4 hours (before flash rust forms). Primer selected for substrate compatibility and chemical exposure profile. Primer DFT verified before polyurea application.
High-Pressure Polyurea Spray Application
Polyurea or polyurea/polyaspartic hybrid sprayed at high pressure in controlled passes to specified thickness (typically 60-250+ mils depending on application). Material builds rapidly, conforming to complex equipment geometry.
Quality Inspection & Return to Service
DFT verification at multiple points. Adhesion testing on witness panels. Holiday/spark testing for critical containment applications. Equipment returned to service within 24 hours of final coat.


What We Use & Why
Foam Type
Aliphatic Polyurea/Polyaspartic (UV-Stable, 100% Solids)
Elastochem SwiftTop TC 446 aliphatic polyaspartic coating for UV-stable applications. Aromatic polyurea base coats for high-build impact protection. System selection based on UV exposure, impact severity, and chemical resistance requirements.
Thickness
60-250+ mils depending on application and impact severity
Service Life
15-25+ years in heavy industrial service
2026 Industrial Asset Armor & Heavy Fleet Protection Spray Foam Cost & Ontario Building Code Specs
In-Depth: Industrial Asset Armor & Heavy Fleet Protection
5-7 min read
WHY UV STABILITY MATTERS FOR OUTDOOR ASSETS
- Aromatic Polyurea: Contains aromatic isocyanates (MDI) that absorb UV radiation. This causes molecular chain scission — breaking down the polymer surface. Result: yellowing, chalking, and loss of surface hardness within 1-3 years of sun exposure.
- Aliphatic Polyurea/Polyaspartic: Contains aliphatic isocyanates (HDI/IPDI) that are inherently UV-transparent. UV radiation passes through without damaging the polymer. Result: color stability, gloss retention, and maintained protective properties for 10-15+ years.
- Hybrid Systems: We frequently specify aromatic polyurea base coats (for high-build impact protection at lower cost) topped with aliphatic polyaspartic top coats (for UV stability and aesthetics). This combines maximum impact resistance with long-term UV performance.
Key insight: For any outdoor industrial asset, an aliphatic top coat is not optional — it’s essential. Without it, even the best aromatic polyurea will degrade within a few years of Ontario’s sun exposure.
Frequently Asked Questions
60-Second Instant Ballpark
Related Industrial Asset Armor & Heavy Fleet Protection Cost & Building Code Guides
Proudly Serving Toronto, GTA & All of Ontario
Direct contractor pricing · Caliber Certified (CAN/ULC-S705.2) Installers · $0 Travel Fee Across Ontario
With regional mobile crews stationed right near you, we charge $0 travel fees and stand as the best, most trusted contractor to serve your home or commercial building anywhere in Ontario.


