Sprayfoam SolutionsWe Serve GTA & Across Ontario!
Home

Residential

Major Projects
  • Custom New Homes
  • Additions & Renovations
  • Muskoka Cottages & Homes
  • Exterior Walls
  • Interior Ceiling Sound Dampening
Targeted Areas
  • Basements
  • Attics & Roof Decks
  • Crawl Spaces
  • Rim Joist Headers
  • Garages & Floors Over Garage
  • Cathedral Ceilings
  • Cantilevers & Overhangs
  • Under-Slab & Radiant Floors
  • Cold Rooms
  • RVs & Vans
  • Swimming Pools

Commercial

Buildings & Facilities
  • Commercial SPF & Fire Coating
  • Warehouse & Industrial
  • Metal Buildings
  • Barns & Agricultural
  • Multi-Unit Buildings
  • Flat Roof Systems
Specialty
  • Shipping Containers
  • Silos & Water Tanks

Code & Expert Guides

  • What is Spray Foam?
  • Cost of Spray Foam
  • Our Sprayfoam Chemicals
  • Certifications & Standards
  • Spray Foam Knowledge Base
Ontario Code & ULC Guides
  • Ontario R-Value & Code Guide
  • CAN/ULC-S705.2 Code Rules
  • Open-Cell vs. Closed-Cell

Thermal Barriers (Foam)

Core Systems
  • DC315 Intumescent Coating
  • Sprayfoam & Fire Coating (2-in-1)
Where Code Requires It
  • Mechanical & Furnace Rooms
  • Exposed Basements & Crawls
  • Attached Garage Ceilings
  • Warehouse Exposed Foam Decks
  • Unvented Attics & Roof Decks
  • Rim Joists & Floor Headers

Structural Fireproofing

Fireproofing Systems
  • Cementitious Fireproofing (SFRM)
  • Intumescent Fire Coating (Thin-Film)
Structural Assemblies
  • Structural Beams & Columns
  • Metal Floor & Roof Decks
  • Commercial Parkades & Garages
  • Architectural Exposed Steel (AESS)
  • Request Fire Spec & Quote

Code & Expert Guides

  • What is DC315 Fire Coating?
  • Cost of DC315 Fire Coating
  • Our Fire Coating Chemicals
  • Certifications & Standards
  • Fire Coating Knowledge Base
Ontario Code & ULC Guides
  • Ontario 15-Min Thermal Barrier
  • ULC 1–4 Hr Steel Ratings
  • DC315 vs. Type X Drywall
Locations
Ontario Service RegionsView All 50+ Cities →
Toronto & Central
Toronto · Etobicoke · North York · Scarborough
Peel Region
Mississauga · Brampton · Caledon
York Region
Vaughan · Markham · Richmond Hill · Newmarket
Halton Region
Oakville · Burlington · Milton · Halton Hills
Durham Region
Pickering · Whitby · Oshawa · Ajax · Clarington
Hamilton & Niagara
Hamilton · St. Catharines · Niagara Falls · Brantford
Kitchener / Waterloo / Guelph
Kitchener · Waterloo · Cambridge · Guelph
Barrie & Simcoe County
Barrie · Orillia · Innisfil · Collingwood
Muskoka & Cottage Country
Muskoka · Huntsville · Gravenhurst · Bracebridge
Windsor & Southwestern ON
Windsor · London · Sarnia · Chatham-Kent
Our WorkReviews
Contact UsGet My Pricing
Serving GTA & Beyond
Sprayfoam SolutionsWe Serve GTA & Across Ontario!
Home
Spray Foam Services
Overview & Guides
What is Spray Foam?Cost of Spray FoamOpen-Cell vs. Closed-CellOntario R-Value & Code Guide
Project Applications
Custom New HomesAdditions & RenovationsMuskoka Cottages & HomesExterior WallsInterior Ceiling Sound DampeningBasementsAttics & Roof DecksCrawl SpacesRim Joist HeadersGarages & Floors Over GarageCathedral CeilingsCantilevers & OverhangsUnder-Slab & Radiant FloorsCold RoomsRVs & VansSwimming Pools
Overview & Guides
Commercial SPF & Fire Coating OverviewCAN/ULC-S705.2 Code RulesCost of Spray Foam
Project Applications
Warehouse & IndustrialMetal BuildingsBarns & AgriculturalMulti-Unit BuildingsFlat Roof SystemsShipping ContainersSilos & Water Tanks
Overview & Guides
Our Sprayfoam ChemicalsCertifications & StandardsSpray Foam Knowledge Base
Fire Coatings
Overview & Guides
DC315 Fire Coating OverviewSprayfoam & DC315 Package (2-in-1)What is DC315 Fire Coating?Cost of DC315 Fire CoatingDC315 vs. Type X DrywallOntario 15-Min Thermal Barrier
Project Applications
Mechanical & Furnace RoomsExposed Basements & CrawlsAttached Garage CeilingsWarehouse Exposed Foam DecksUnvented Attics & Roof DecksRim Joists & Floor Headers
Overview & Guides
Intumescent Fire Coating OverviewULC 1–4 Hr Steel Fire Ratings
Project Applications
Structural Beams & ColumnsArchitectural Exposed Steel (AESS)Request Fire Spec & Quote
Overview & Guides
Cementitious Fireproofing OverviewULC 1–4 Hr Steel Fire Ratings
Project Applications
Metal Floor & Roof DecksCommercial Parkades & GaragesRequest Fire Spec & Quote
Overview & Guides
Our Fire Coating ChemicalsCertifications & StandardsFire Coating Knowledge Base
Ontario Service RegionsView All 50+ Cities →
Toronto & Central
Toronto · Etobicoke · North York · Scarborough
Peel Region
Mississauga · Brampton · Caledon
York Region
Vaughan · Markham · Richmond Hill · Newmarket
Halton Region
Oakville · Burlington · Milton · Halton Hills
Durham Region
Pickering · Whitby · Oshawa · Ajax · Clarington
Hamilton & Niagara
Hamilton · St. Catharines · Niagara Falls · Brantford
Kitchener / Waterloo / Guelph
Kitchener · Waterloo · Cambridge · Guelph
Barrie & Simcoe County
Barrie · Orillia · Innisfil · Collingwood
Muskoka & Cottage Country
Muskoka · Huntsville · Gravenhurst · Bracebridge
Windsor & Southwestern ON
Windsor · London · Sarnia · Chatham-Kent
Our WorkReviewsContact Us
More Info & Resources
› About Us› Certifications› All Services› Blog & Guides
We Serve GTA & Across Ontario!
Get My Pricing 647-333-3626
CONTAINER & SEA-CAN INSULATION SPECIALISTS — ONTARIO-WIDE
5.0 Google Rating·45+ Verified Reviews

Converting a 20ft or 40ft Shipping Container?
Stop "Container Rain" With 2 lb Closed-Cell Spray Foam

2026 Quick Summary & Ballpark Cost

Shipping container (Sea-Can) spray foam insulation in Toronto and Ontario costs $1,650 to $3,850+ per container in 2026 ($2.50–$4.85/sq ft for 20ft Standard and 40ft High-Cube units). Our Caliber Certified (CAN/ULC-S705.2 Licensed) Commercial Spray Foam Installers apply CAN/ULC-S705.1 2 lb closed-cell foam (R-12 to R-21+) directly to corrugated Corten steel to permanently eliminate container rain and provide optional IFTI DC315® thermal barrier coating.

-$250 Estimate Credit
Get My Price in 60s 647-333-3626
Caliber Certified (CAN/ULC-S705.2) InstallersWSIB & Up to $10M InsuredCCMC Approved Foam Systems
Shipping Containers Toronto project 1Shipping Containers Toronto project 2Shipping Containers Toronto project 3Shipping Containers Toronto project 4Shipping Containers Toronto project 5
Shipping Containers — Certified Ontario Installation

Instant Price Estimate

Get your spray foam price & $250 Credit in 60s.

Caliber S705.2 Certified
WSIB Insured
OR QUICK QUOTE HERE

THE SPRAY FOAM EXPERTS

That Actually Lower Your Energy Bills
★★★★★5.0 Google Rating•55+ Verified Reviews•Serving Across Ontario
Tap to Select Your Project:
or call directly: 647-333-3626

Our Canadian Suppliers, Partners, Clients & Credentials

Canadian Owned logo
Mattamy Homes logo
WSIB Ontario logo
Treasure Hill logo
Huntsman logo
Minto logo
Carlisle logo
Daniels logo
Soprema logo
Geranium logo
THE SMART CHOICE

The Cost of Poor Insulation vs. Your Long-Term ROI

Standard insulation methods fail in steel containers, leading to condensation rain, rust damage, and unbearable seasonal temperatures. Closed-cell spray foam forms a seamless, high-performance thermal break bonded directly to the steel skin.

BUILDING RISK AUDIT

1. Long-Term Risks & The Sprayfoam Cure

Click any common building issue below to see the solution comparison on the right:

1
Severe "container rain" condensation dripping from cold corrugated steel ceilings onto tools, electronics, and finishes
STANDARD INSULATION (Fails in 5-10 yrs)

Bare steel conducts temperature instantly. When warm interior air hits the freezing ceiling, heavy condensation forms and rains down on tools, furniture, and inventory.

THE SPRAYFOAM SOLUTION: Seamless Condensation Vapor Barrier
SPRAYFOAM ADVANTAGE (Monolithic Barrier)

2 inches of closed-cell foam sprayed directly onto corrugated steel creates a continuous vapor barrier, eliminating container sweating and rain completely.

2
Solar heat baking uninsulated steel containers past 55°C (130°F) during July and August in Ontario
3
Sub-zero winter cold radiating straight through steel walls and uninsulated marine-plywood subfloors
4
Narrow 7'8" interior container width where bulky 2x6 fiberglass framing wastes up to 12 inches of floor width
5
Hidden interstitial rust and black mould trapped inside hollow corrugation ribs behind rigid foam boards or batts
6
Booming metallic echo, rain drum noise, and side-panel flex in modified Sea-Can structures
STANDARD INSULATION (Fails in 5-10 yrs)

Bare steel conducts temperature instantly. When warm interior air hits the freezing ceiling, heavy condensation forms and rains down on tools, furniture, and inventory.

THE SPRAYFOAM SOLUTION: Seamless Condensation Vapor Barrier
SPRAYFOAM ADVANTAGE (Monolithic Barrier)

2 inches of closed-cell foam sprayed directly onto corrugated steel creates a continuous vapor barrier, eliminating container sweating and rain completely.

ENGINEERED MONOLITHIC PERFORMANCE

Unlike conventional insulation materials that sag, settle, or degrade over time, closed-cell polyurethane foam cures to an airtight, continuous barrier bonded directly to the substrate.

FINANCIAL CASE STUDY

2. Commercial ROI & Long-Term Financial Payback

Verified benchmarks based on a typical 40ft High-Cube Shipping Container — Ontario

$24,000 – $38,000
Estimated 20-Year Savings
1 – 2 years
Payback Period
$1,200 – $1,900
Annual Utility Savings
50 – 70%
Energy Cost Reduction
Year 1: InstallInstant 40-60% utility reduction
Years 3-5: BreakevenInvestment fully paid back
Years 6-20+: ProfitHundreds of thousands saved
Eliminates container rain and condensation damage 100%
Preserves 4–6 inches of interior living and storage space vs fiberglass
Prevents steel panel rust and stops summer 55°C heat buildup
Get My Price in 60s
The Solution

Why Ontario Container Builders & Fabricators Choose 2 lb Closed-Cell Foam

SPRAY FOAM

100% Elimination of "Container Rain" & Steel Corrosion

Closed-cell polyurethane spray foam bonds chemically to every corrugated Corten steel valley and rib, blocking humid interior air from ever touching cold metal.

SPRAY FOAM

Maximum Interior Width Preservation (R-18 to R-21 in 3")

In an 8-foot-wide Sea-Can, every inch matters. High-density 2 lb closed-cell foam delivers R-6.0+ per inch so you achieve four-season Ontario comfort in a minimal profile.

SPRAY FOAM

Direct-to-Steel Structural Rigidity & Sound Deadening

Expanding closed-cell foam fills deep corrugation flutes with zero air voids, stiffening cut wall panels around windows/doors and silencing rain and highway noise.

FIRE COATING

Single-Source Spray Foam + IFTI DC315® Thermal Barrier

For utility containers, commercial site offices, and exposed-foam Sea-Cans, we apply CAN/ULC-S124 certified IFTI DC315® fire coating (/fire-coating-dc315) on the same mobilization.

Shipping Containers benefit 1
Shipping Containers benefit 2
Shipping Containers benefit 3
Shipping Containers benefit 4

THE SPRAY FOAM EXPERTS

That Actually Lower Your Energy Bills
★★★★★5.0 Google Rating•55+ Verified Reviews•Serving Across Ontario
STEP 1: 60-SECOND PRICE CHECK
LOCK IN DIRECT CONTRACTOR PRICING

Fast Response & Quotes · No Commitment!

Tap to Select Your Project:
or call directly: 647-333-3626
VERIFIED, CERTIFIED & LISTED ON
Google5.0 ★ Verified
HomeStarsVerified Pro
Houzz ProListed Contractor
TrustedProsCanadian Directory
Caliber CertifiedCAN/ULC-S705.2
WSIB & CCMCOntario Cleared
Our Process

Our Shipping Container & Sea-Can Spray Foam Process

1

Container Geometry & Substrate Inspection

60-Sec Online Price Check

We verify 20ft vs 40ft High-Cube dimensions, corrugation depth, wood/steel stud strapping, underfloor access, and whether drywall or DC315 fire coating will be used.

2

Degreasing, Rust Check & Precision Masking

1–2 Hours Prep per Unit

Window cutouts, cargo doors, electrical rough-ins, and marine plywood floors are masked while Corten steel surfaces are verified clean and dry.

3

Direct-to-Corrugated-Steel 2 lb Closed-Cell Spray

2–4 Hours Spraying per Container

Caliber Certified (CAN/ULC-S705.2 Licensed) Commercial Spray Foam Installers fill the corrugated valleys and build a continuous 1.5" to 3.5" thermal envelope across walls, ceiling, and underfloor.

4

Stud Scarfing or IFTI DC315® Thermal Barrier Finish

Same-Day Single-Unit Turnaround

We shave foam flush with strapping for drywall/plywood lining, or apply IFTI DC315® 15-minute thermal barrier coating for exposed commercial/utility containers.

Shipping Containers project photo 1
Shipping Containers project photo 2
Technical Specs

What We Use & Why

Foam Type

CAN/ULC-S705.1 Medium-Density 2 lb Closed-Cell SPF

Eliminates hollow air pockets behind Corten steel corrugations, provides a Class II vapour retarder at 1.5"+, and maximizes narrow interior width.

Thickness

1.5"–2.0" (Sweat Control Storage) to 3.0"–3.5" (Four-Season Living/Office)

R-Value

R-9 to R-21+ (LTTR ~R-6.0 to R-6.2 per inch)

2026 Ontario Pricing & Code Specs

2026 Shipping Container (Sea-Can) Spray Foam Cost Guide (Toronto & Ontario)

Exact 2026 Ontario unit rates and turnkey per-container pricing for 20ft Standard, 40ft Standard, and 40ft High-Cube shipping containers. Get a $250 Credit on Your Estimate — Check Your Price in 60 Seconds • No Site Visit Required.

SEA-CAN SWEAT & STORAGE PROTECTION

1.5"–2.0" Dew-Point / Condensation Control Package

$2.50 – $3.20
/ sq ft ($1,650–$2,650 per 20ft–40ft Sea-Can)
  • 1.5" to 2.0" CAN/ULC-S705.1 2 lb closed-cell foam (~R-9 to R-12)
  • Permanently stops "container rain" ceiling drips & tool rust
  • Fills corrugated Corten steel ribs with zero hidden air pockets
  • Ideal for tool cribs, commercial storage & jobsite Sea-Cans
Get My Price in 60s →
MOST POPULAR — 4-SEASON CONTAINER HOMES & OFFICES

3.0"–3.5" R-20/R-21 Full Thermal Envelope Package

$3.75 – $4.85
/ sq ft ($2,350–$3,850 per 20ft–40ft Sea-Can)
  • 3.0" to 3.5" 2 lb closed-cell spray foam (R-18 to R-21+ LTTR)
  • Continuous Class II vapour barrier for -30°C Ontario winters
  • Includes stud-flush shaving for drywall, shiplap, or plywood walls
  • Includes official CAN/ULC-S705.2 Daily Work Record for Ontario Building Code permits
Get My Price in 60s →
EXPOSED FOAM + COMMERCIAL FIRE CODE

Turnkey Closed-Cell SPF + IFTI DC315® Fire Coating

$5.25 – $6.95+
/ sq ft combined foam + DC315 coating
  • 2.0"–3.5" 2 lb closed-cell foam + 18 mils WFT IFTI DC315®
  • Meets CAN/ULC-S124 & Ontario Building Code 15-minute thermal barrier code
  • Required for exposed foam in BESS battery, pump & utility containers
  • Fleet & multi-container yard mobilization discounts available
Get My Price in 60s →
Building / Container Size & ScopeFoam Type & DepthTarget R-Value (Ontario Building Code / SB-10)2026 Cost Per Sq FtTypical Installed Project Total
20ft Standard Container — Walls & Ceiling (~620 sq ft surface)1.5"–2.0" 2 lb Closed-Cell SPFR-9 to R-12 Sweat-Stop$2.65 – $3.20 / sq ft$1,650 – $1,985
20ft Standard Container — 4-Season Office/Cabin (~620 sq ft)3.0"–3.5" 2 lb Closed-Cell SPFR-18 to R-21 Ontario Building Code Envelope$3.80 – $4.75 / sq ft$2,350 – $2,945
40ft High-Cube Container — Walls & Ceiling (~1,180 sq ft surface)2.0" 2 lb Closed-Cell SPFR-12 Condensation Control$2.50 – $3.10 / sq ft$2,950 – $3,650
40ft High-Cube Container — Full R-20 + Underbelly (~1,500 sq ft)3.0"–3.5" 2 lb Closed-Cell SPFR-18 to R-21+ Four-Season$3.75 – $4.65 / sq ft$3,850 – $5,650
40ft Commercial / Utility Sea-Can (Foam + DC315 Fire Coating)3.0" 2 lb SPF + 18 mil DC315R-18 + CAN/ULC-S124 Fire$5.25 – $6.75 / sq ft$6,195 – $7,965
-$250 Estimate Credit

60-Second Instant Ballpark

Get My Price in 60s 647-333-3626

Shipping Container (Sea-Can) Ontario Building Code & CAN/ULC-S705.1 Technical Specification Ledger

2026 CORTEN STEEL CONTAINER SPEC
Material & Installation Standard
CAN/ULC-S705.1 Medium-Density 2 lb Closed-Cell Foam installed per CAN/ULC-S705.2 by Caliber Certified Installers
2026 Ontario Building Code Target
R-12 Sweat Control (Storage Sea-Can) | R-20 to R-24 Walls & R-31 Ceiling/Floor (Ontario Building Code Modular/ADU Container)
Aged Thermal Resistance (LTTR)
R-6.0 to R-6.2 per inch (CAN/ULC-S770 Long-Term Thermal Resistance)
Air & Condensation Barrier
< 0.02 L/(s·m²) @ 75 Pa — Zero-void adhesion inside deep Corten steel corrugation flutes
Vapour Permeance
< 45 ng/(Pa·s·m²) at 38–50 mm (Class II Vapour Retarder — prevents hidden container rust)
Approved CCMC Chemical Systems
BASF Walltite® Eco v.3, Huntsman Building Solutions (Icynene/Demilec), Johns Manville & other approved CCMC spray foam chemicals
Thermal Barrier Option
IFTI DC315® Intumescent Coating (CAN/ULC-S124 / Ontario Building Code 3.1.4.2 & 9.10.17.10 — 15-Minute Thermal Barrier)
Warranty & Documentation
CAN/ULC-S705.2 Daily Work Records for Municipal ADU/Modular Permits, WSIB & $5M Commercial Liability
Expert Insights

In-Depth: Shipping Containers

5 min read

A shipping container is an airtight steel box with zero vapour permeance and extreme thermal conductivity. Even a small shift in outdoor temperature drops the Corten steel ceiling below the interior dew point, causing moisture from breathing, propane heaters, or damp equipment to condense into heavy water droplets ("container rain").

By spraying CAN/ULC-S705.1 2 lb closed-cell foam directly onto the steel, our Caliber Certified (CAN/ULC-S705.2 Licensed) Commercial Spray Foam Installers bond a monolithic thermal break and Class II vapour barrier directly to the metal. Read our Steel Condensation Engineering Guide.

Because shipping container walls have deep trapezoidal corrugations, the true sprayable surface area of a 20ft container is ~620 sq ft (walls + ceiling) and a 40ft High-Cube is ~1,180 sq ft. At 2026 Ontario rates of $2.50–$3.20/sq ft (1.5"–2" sweat-stop) and $3.75–$4.85/sq ft (3"–3.5" R-20 four-season), most 20ft containers cost $1,650–$2,945 and 40ft containers cost $2,950–$5,650.

You can check your exact container price in 60 seconds and claim a $250 Estimate Credit with no site visit required.

Never bolt wood or steel studs tightly against the interior ribs of a container and only spray between the bays — the steel ribs will telegraph frost straight through your drywall screws at -20°C. Instead, float 2x3 wood framing 1 inch off the inner corrugation ribs so continuous closed-cell foam encapsulates the steel behind every stud.

Explore more direct-to-metal framing details in our Metal Structure Spray Foam Guide.

Industrial fabricators across Ontario use modified Sea-Cans for Battery Energy Storage Systems (BESS), water-treatment skids, mining offices, and telecom shelters where drywall cannot be used. We provide single-source application of 2 lb closed-cell foam plus IFTI DC315® 15-minute thermal barrier coating (see our DC315 service and 2026 DC315 pricing) with full wet-mil QA logs.

FAQ

Frequently Asked Questions

How much does it cost to spray foam a 20ft or 40ft shipping container in Ontario in 2026?
In 2026, insulating a 20ft Standard shipping container (~620 sq ft of corrugated wall and ceiling area) costs $1,650 to $1,985 for a 1.5"–2.0" sweat-control layer or $2,350 to $2,945 for a 3.0"–3.5" four-season R-20 envelope. A 40ft High-Cube container (~1,180 sq ft of walls and ceiling) costs $2,950 to $3,650 at 2.0" depth or $3,850 to $5,650 for a full 3.0"–3.5" R-20+ conversion including the underbelly. Get a $250 Credit on Your Estimate — Check Your Price in 60 Seconds in our 60-second online estimator • No Site Visit Required.
Why do rigid foam boards (XPS/EPS) and fiberglass batts fail inside shipping containers?
Shipping container walls are made of trapezoidal corrugated Corten steel ribs that step in and out by 1.5 to 2 inches. Flat foam boards or fiberglass batts leave hollow vertical air channels behind every interior corrugation rib. Warm air leaks behind the board, condenses against the freezing steel, and causes hidden black mould and structural rust. Closed-cell spray foam expands into every flute with zero air gap.
Should I choose a 40ft High-Cube (9'6" tall) over a Standard (8'6" tall) container for spray foaming?
Yes — if you are building a container home, laneway suite, or office, we strongly recommend a High-Cube (9'6" exterior height) container. After applying 3.0"–3.5" of closed-cell spray foam to the ceiling and insulating the floor assembly, a High-Cube container still preserves a comfortable 8'4"+ finished ceiling height.
How do you insulate the floor of a shipping container?
We insulate shipping container floors in one of two ways: (1) if the container is elevated on piers, helical piles, or blocks with at least 24"–30" of clearance, we spray 3.0"–4.0" of 2 lb closed-cell foam directly onto the exterior steel cross-members and subfloor underside; or (2) we spray between interior floor sleepers before your finished subfloor is installed.
Do I frame the interior walls before or after you spray foam the container?
Always frame (or install 2x3 / 2x4 wood or steel hat-channel strapping) BEFORE we spray, standing the studs ~0.5"–1.0" proud of the inner steel ribs so our Caliber Certified (CAN/ULC-S705.2 Licensed) Commercial Spray Foam Installers can spray continuously behind the studs to break thermal bridging.
Does exposed spray foam inside a storage or utility Sea-Can need DC315 fire coating?
If the shipping container is used as an occupied jobsite office, commercial kiosk, BESS battery enclosure, or mechanical/pump house without 1/2" drywall covering the foam, Ontario Building Code requires a 15-minute thermal barrier. We apply certified IFTI DC315® intumescent coating (/fire-coating-dc315) directly over the foam.
Can you spray foam multiple shipping containers at our fabrication yard?
Yes. We partner with modular container builders, electrical/mechanical house fabricators, and construction fleets across Toronto and Ontario. Insulating 2 to 10+ containers during a single mobile rig mobilization significantly lowers your per-unit cost.
How long does it take to spray foam a 20ft or 40ft Sea-Can?
A single 20ft or 40ft shipping container is typically masked, sprayed with 2 lb closed-cell foam, and shaved flush in just 3 to 6 hours on site. The foam cures tack-free in minutes and is ready for drywall or electrical trim after 24 hours of ventilation.
-$250 Estimate Credit

60-Second Instant Ballpark

Get My Price in 60s 647-333-3626
2026 Ontario Guides & Resources

Related Shipping Containers Cost & Building Code Guides

Steel Structures8 min read

Spray Foam Insulation for Metal Buildings & Steel Enclosures (2026)

Why 2 lb closed-cell foam is mandatory for corrugated steel walls, Sea-Cans, and modular steel structures in Ontario.

Read Full 2026 Guide
Condensation Physics7 min read

How to Permanently Fix Metal Roof & Container Condensation ("Indoor Rain")

The building science behind "container rain" and how direct-to-metal closed-cell spray foam eliminates dew-point sweating.

Read Full 2026 Guide
Fire Code & DC3158 min read

DC315 Fire Coating Cost & Ontario Building Code Thermal Barrier Rules for Exposed Foam

When shipping container offices, utility enclosures, and storage units require CAN/ULC-S124 intumescent fire coating.

Read Full 2026 Guide
Commercial Pricing9 min read

Commercial Warehouse & Modular Yard Spray Foam Cost in Ontario (2026)

Compare 2026 Ontario commercial spray foam unit rates, multi-unit mobilization savings, and Ontario Building Code energy code rules.

Read Full 2026 Guide
2-IN-1 COMPLIANCE BUNDLE

COMBINE SPRAY FOAM & FIRE COATING WITH OUR COMBINED PACKAGE

Get insulation & code-compliant thermal barrier protection from a single certified contractor. Zero trade conflicts, zero scheduling delays.

Combined Package Banner

Unlock Turnkey Combined Package Pricing

Enter your details below or use our 60-second online estimator.

or call direct for immediate pricing
Call Direct: 647-333-3626

Proof of Performance

Trusted by Ontario's top builders, general contractors & homeowners.

Certified Installation & On-Time Delivery

5.0
(45+ Google Reviews)

“We had 20,000 sq ft of our logistics warehouse insulated with closed-cell spray foam. The building condensation is completely gone. Their commercial rig handled the project in just three days without interrupting our daily operations.”

Amit P.

Mississauga, ON

Facilities DirectorCommercialWarehouse Insulation

“They insulated a retail commercial building envelope for us. High-performance closed-cell foam acted as both insulation and vapor barrier. Excellent scheduling and pass on code inspection. Highly professional.”

Rajesh S.

Etobicoke, Toronto

General ContractorCommercialCommercial Spray Foam

“Used them for a multi-unit commercial project. They applied closed-cell spray foam on metal stud walls. Passed building code on the first inspection. Clean framing and no overspray. Excellent partner.”

Priya K.

Vaughan, ON

BuilderCommercialOffice Building Insulation

“Critical temperature control was required for our food distribution warehouse. They sprayed closed-cell foam on the ceiling and walls. Amazing condensation control and thermal barrier. Professional commercial crew.”

Muhammad A.

Brampton, ON

Facilities DirectorCommercialCold Storage Spray Foam

“We hired them to insulate a large steel commercial building. The closed-cell spray foam bonds perfectly to metal panels, stopping rust and drafts. Excellent WSIB-compliant, licensed crew.”

Fatima Z.

Markham, ON

Project ManagerCommercialMetal Building Insulation

“They sprayed our large farm workshop and barn walls. Condensation was ruining our equipment. Now the barn is draft-free and dry. Great commercial rates and top quality. Highly recommended.”

Vikram M.

Barrie, ON

Project ManagerCommercialAgricultural Spray Foam

“We use their commercial services for all our industrial buildings. Their rigs are top-of-the-line, and their installers are Caliber Certified (CAN/ULC-S705.2 licensed). Passed building inspections first try.”

Rohan D.

Hamilton, ON

BuilderCommercialCommercial Spray Foam

“Insulated a commercial property crawl space to stop drafts rising into offices. Polyurethane closed-cell foam was applied flawlessly. Punctual crew, WSIB insured, $5M liability coverage. Highly recommended.”

Tariq H.

Oakville, ON

Property ManagerCommercialCommercial Crawl Space

“Professional warehouse insulation project. They covered all our stock with plastic sheeting before spraying. Clean, code-compliant, and on-schedule. Our HVAC energy bills dropped by 35%.”

Yasmin R.

Pickering, ON

Facilities DirectorCommercialWarehouse Insulation

“Hired them to fix condensation in an industrial steel warehouse. Closed-cell spray foam solved the problem completely and added structural rigidity to the metal siding. Outstanding service.”

Sanjay G.

Kitchener, ON

General ContractorCommercialMetal Building Insulation

“Insulated four exterior industrial storage tanks using CCMC-approved closed-cell polyurethane foam. The thermal performance is exceptional. Safe mobilization, certified crews, and zero safety issues.”

Anjali V.

London, ON

Facilities DirectorCommercialSilo & Tank Insulation

“We needed custom shipping containers insulated for mobile office use. They sprayed 2 inches of closed-cell foam on the interior walls. No condensation, perfectly flat finish. Passed inspection easily.”

Chen W.

Toronto Port, Toronto

Project ManagerCommercialShipping Container Insulation

“Hired them to insulate a multi-story apartment building renovation. Spanning five floors, they completed the wall and floor assemblies on schedule. Professional, fully insured, and CCMC certified.”

Mei L.

Mississauga, ON

Property ManagerCommercialMulti-Unit Residential Insulation

“Excellent commercial insulation partner. We use them for all our steel-frame developments. Their high-output mobile rigs are fast, and the foam thickness is highly consistent. Excellent rates.”

Wei Z.

Vaughan, ON

General ContractorCommercialCommercial Spray Foam

“They insulated our older commercial warehouse ceiling. Closed-cell spray foam sealed all the deck joints and stopped winter drafts. We noticed a major reduction in gas bills.”

Ying H.

Brampton, ON

Facilities DirectorCommercialWarehouse Retrofit

“Hired Sprayfoam Solutions to restore our warehouse roof using a hybrid flat roof spray foam and silicone roof coating. No tear-off was required, saving us over $40,000 compared to a traditional roof replacement. The roof is 100% waterproof and reflects heat perfectly.”

Jun Y.

North York, Toronto

Facilities DirectorCommercialFlat Roof Spray Foam & Coating

“Our commercial flat roof was constantly leaking. They applied high-density spray foam and a high-solids silicone coating. It created a seamless, ponding-water resistant membrane. The project was completed on budget with zero downtime for our tenants.”

Linh N.

Mississauga, ON

Property ManagerCommercialFlat Roof Restoration

“Saved our commercial roof without a costly tear-off. They repaired the leaks and applied a reflective silicone coating. Rooftop temperatures dropped significantly, lowering our summer AC costs. Excellent service.”

Jin S.

Vaughan, ON

Facilities DirectorCommercialSilicone Roof Coating

“Outstanding roof restoration project. They applied 3lb high-density spray foam directly over our old membrane. Sealed every roof penetration perfectly. Excellent certified crew, WSIB insured.”

Min-Ji K.

Brampton, ON

Project ManagerCommercialCommercial Flat Roof

“Professional flat roof restoration. Seamless foam and silicone coating has stopped all leaks and significantly improved the building insulation. Professional, licensed team, and competitive pricing.”

Hao T.

Markham, ON

Property ManagerCommercialFlat Roof Restoration

“Great flat roof coating service. They performed a thermal scan to locate wet insulation, replaced those sections, and coated the roof with reflective silicone. 100% leak-proof and energy efficient.”

Raymond C.

Oakville, ON

Facilities DirectorCommercialSilicone Roof Coating

“Insulated and waterproofed our industrial plaza flat roof. Seamless high-density foam stops drafts and water leaks in one shot. Certified installers using CCMC-approved roofing systems.”

Kevin C.

Hamilton, ON

Project ManagerCommercialFlat Roof Spray Foam

“Professional, certified crews. They did a marvelous job applying silicone coating on our warehouse flat roof. Complete ponding water resistance and 20-year durability. Excellent work.”

Steven B.

Barrie, ON

Facilities DirectorCommercialRoof Silicone Coating

“We have used them for two flat roof restorations now. High-density spray foam followed by white reflective silicone. Tenants reported immediate comfort improvements. No leaks, highly recommended.”

Deborah D.

Oshawa, ON

Property ManagerCommercialCommercial Roof Restoration

“Restored our retail store flat roof without interrupting business. Seamless spray foam and silicone coating has survived two harsh winters with zero issues. Great warranties and WSIB insured.”

Edward M.

Kitchener, ON

Facilities DirectorCommercialFlat Roof Restoration

“Excellent roof restoration service. Thermal scan was done first to ensure no wet insulation was covered. The silicone coating application was very clean with no overspray on surrounding cars.”

Stephanie L.

London, ON

Project ManagerCommercialSilicone Roof Coating

“High-density polyurethane foam and reflective coating applied on our manufacturing facility roof. Lowered our cooling costs by 20% last summer. Excellent service, clean, and highly professional.”

Ronald K.

Vaughan, ON

Facilities DirectorCommercialFlat Roof Spray Foam

“We needed a certified 15-minute thermal barrier for a large commercial permit. Their DC315 application was flawlessly done, meeting all Building Code compliance standards on the first inspection. They provided full wet film thickness documentation.”

Rebecca P.

Scarborough, Toronto

General ContractorCommercialDC315 Fire Coating

“Highest rated fireproofing team in the GTA. They arrived within 48 hours for a CAN/ULC-S124 compliant intumescent coating project in a basement suite. The documentation provided was exactly what the inspector needed.”

Anthony G.

Mississauga, ON

General ContractorResidentialSpray Foam & DC315

“We use Sprayfoam Solutions for all our exposed spray foam projects. They apply the closed-cell foam and the DC315 fire coating on the same day—one crew, one mobilization. Saves time and framing stays clean.”

Laura J.

Vaughan, ON

BuilderResidentialDC315 Thermal Barrier

“Highly professional DC315 intumescent coating application on exposed spray foam in our mechanical rooms. The crew verified wet film thickness (WFT) continuously and left a spotless workspace. Passed inspection.”

Albert N.

Brampton, ON

Project ManagerCommercialDC315 Fire Coating

“Ontario Building Code requires a thermal barrier over exposed basement spray foam. Their DC315 application was fast and certified. They provided the CCMC evaluation report immediately for our permit file.”

Cynthia O.

Markham, ON

BuilderResidentialThermal Barrier Code Compliance

“They applied DC315 fire coating over exposed spray foam in an attic storage area. Passed building code inspection first try. Certified applicator, WSIB insured, and same-week scheduling. Excellent.”

Ryan S.

Oakville, ON

General ContractorCommercialDC315 Fire Coating

“We hire them for all our legal duplex conversions. They spray the closed-cell insulation and follow up with DC315 intumescent coating for code-compliant fire safety. Fast, neat, and highly professional.”

Kathleen D.

Hamilton, ON

BuilderResidentialSpray Foam & Fire Coating

“Excellent experience. Certified DC315 application over foam in a commercial mechanical loft. Passed inspection easily. They provided a full documentation package with CCMC evaluation reports.”

Justin F.

Barrie, ON

General ContractorCommercialDC315 Thermal Barrier

“We needed a 15-minute thermal barrier in an unfinished basement remodel. They sprayed the closed-cell foam and followed up with code-compliant DC315 fire coating. Passed building permit inspection.”

Amy W.

Kitchener, ON

BuilderResidentialDuplex Code Compliance

“Certified intumescent fire paint over spray foam. The application was clean with no overspray on steel beams or electrical runs. The crew was professional, polite, and fully WSIB insured.”

Brandon H.

London, ON

General ContractorCommercialDC315 Fire Coating

“Passed our building inspection with flying colors. The DC315 application met the 15-minute thermal barrier requirements under the Ontario building code. Highly professional service and documentation.”

Shirley A.

Oshawa, ON

General ContractorCommercialExposed Foam Fire Code

“Excellent duplex conversion project. They applied closed-cell spray foam and DC315 fire coating in the mechanical room. Outstanding coordination, clean work, and complete code compliance.”

Frank T.

East York, Toronto

BuilderResidentialDC315 Thermal Barrier

“Professional fire barrier application. They applied DC315 over exposed polyurethane spray foam. Certified thickness, verified WFT, and flawless documentation for our project engineers.”

Angela E.

Mississauga, ON

General ContractorCommercialDC315 Fire Coating

“Certified DC315 applicator. They sprayed our custom home crawl space foam and protected the space with ignition barrier coating. Neat, prompt, and completely compliant with local building codes.”

Gregory M.

Vaughan, ON

BuilderResidentialSpray Foam & Fire Paint

“They did a fantastic job with DC315 intumescent coating over foam in our commercial kitchen expansion. CCMC approved, passed municipal inspection first try. Professional and clean crews.”

Anna L.

Oakville, ON

General ContractorCommercialDC315 Thermal Barrier

“Hired them to apply cementitious fireproofing on the structural steel beams of a new commercial parking garage. Professional spray application of SFRM to code thickness. Passed third-party inspections first try with zero thickness issues.”

Fatima Z.

York, Toronto

General ContractorCommercialCementitious Fireproofing

“Excellent structural steel fireproofing service. They sprayed low-density cementitious material on the metal deck and columns. Crew worked safe at heights, fully WSIB compliant, and completed the job on schedule.”

Vikram M.

Mississauga, ON

BuilderCommercialCementitious Fireproofing

“We hire them for all our mid-rise commercial steel projects. Their crews apply cementitious fire resistive material (SFRM) to exact building code thickness. Prompt service, great prices, and fully insured.”

Rohan D.

Vaughan, ON

Project ManagerCommercialStructural Steel Fireproofing

“Passed our building inspection. They applied cementitious fire protection on steel columns in our new industrial building. Professional prep, excellent density control, and spotless cleanup. Great contractor.”

Tariq H.

Brampton, ON

BuilderCommercialCementitious Fireproofing

“Professional SFRM fireproofing contractor. They sprayed structural steel beams to meet 2-hour rating requirements. They provided complete technical documents and W/D ratio thickness charts for local inspectors.”

Yasmin R.

Markham, ON

General ContractorCommercialCommercial Fireproofing

“Sprayed cementitious fireproofing on steel deck and joists for our school project. Outstanding team, certified fireproofing crews, WSIB insured. They completed the work on schedule, passing inspection easily.”

Sanjay G.

Oakville, ON

BuilderCommercialStructural Steel Fireproofing

“Reliable commercial fireproofing contractor. Applied cementitious spray on structural steel beams in our new retail development. Excellent price, fast application, and zero scheduling delays.”

Anjali V.

Hamilton, ON

Project ManagerCommercialCementitious Fireproofing

“We needed medium-density cementitious fireproofing for a semi-exposed commercial parking deck. They applied the Monokote SFRM flawlessly. Passed thickness inspection first try. Outstanding crew.”

Chen W.

Barrie, ON

General ContractorCommercialParking Garage Fireproofing

“Great experience. They sprayed structural steel columns on our new commercial warehouse. The application thickness met all building code requirements. Highly professional, certified crews.”

Mei L.

Whitby, ON

BuilderCommercialCommercial Fireproofing

“Hired them to fireproof steel framing in a commercial office. They applied cementitious spray to exact specification and cleaned up every scrap of overspray. Passed inspections without issues.”

Wei Z.

Kitchener, ON

Project ManagerCommercialStructural Steel Fireproofing

“Highly professional SFRM application. They worked around our other trades to fireproof structural columns on schedule. Clean work, CCMC approved materials, WSIB insured. Will use again.”

Ying H.

London, ON

General ContractorCommercialCementitious Fireproofing

“We hired Sprayfoam Solutions to apply thin-film intumescent fire coating on architecturally exposed structural steel (AESS) beams in our new corporate headquarters lobby. The finish is incredibly smooth and looks like paint, yet provides a certified 2-hour fire rating. Passed third-party DFT testing first try.”

Jun Y.

Downtown Toronto, Toronto

General ContractorCommercialIntumescent Steel Fireproofing

“Outstanding thin-film intumescent application on exposed steel columns in a retail space. The architects wanted the steel visible, so cementitious was out. They did a marvelous job, primer and topcoat were perfectly applied.”

Linh N.

Mississauga, ON

BuilderCommercialIntumescent Fire Protection

“They applied intumescent coating on exposed timber beams in a heritage building restoration. Achieved code fire rating while preserving the historical wooden structure. Excellent workmanship, clean and professional.”

Jin S.

The Annex, Toronto

General ContractorCommercialAESS Fireproofing

“Excellent intumescent application for exposed structural steel in a commercial office. They verified dry film thickness (DFT) meticulously and provided complete documentation for the fire marshal. Passed inspection.”

Min-Ji K.

Vaughan, ON

Project ManagerCommercialIntumescent Steel Coating

“Hired them to apply intumescent fireproofing on steel structural columns in a new restaurant. Smooth finish, CAN/ULC-S101 compliant, and completed on schedule. Great contractor and pricing.”

Hao T.

Brampton, ON

BuilderCommercialThin-Film Intumescent

“Professional intumescent coating application on steel framing. Architects specified exposed steel look. This thin-film coating expanded perfectly in fire testing. Certified crews, WSIB insured, $5M liability.”

Raymond C.

Markham, ON

General ContractorCommercialAESS Fire Protection

“We needed a 1-hour fire rating on exposed structural steel columns. They applied thin-film water-based intumescent. Excellent smooth paint-like finish, on schedule, and zero issues with building code inspector.”

Kevin C.

Oakville, ON

Project ManagerCommercialIntumescent Fireproofing

“Great thin-film intumescent coating service. They worked weekends to prevent disrupting our ongoing commercial tenant operations. The finish looks spectacular and meets building code. Highly recommended.”

Raymond K.

Hamilton, ON

BuilderCommercialIntumescent Steel Coating

“They applied intumescent fire paint on exposed structural steel columns in a new school library. Smooth AESS finish, WSIB insured, same-week scheduling. Excellent coordination with our drywallers.”

Brenda C.

Barrie, ON

General ContractorCommercialIntumescent Fire Protection

“Professional thin-film intumescent application on exposed steel rafters. Excellent dry film thickness (DFT) reports provided. Passed building inspections first try. Best fireproofing contractor.”

Samuel G.

Pickering, ON

BuilderCommercialAESS Fireproofing

“They sprayed thin-film intumescent over steel framing in our commercial renovation. Cured quickly and was ready for topcoat in 24 hours. Certified crews, outstanding workmanship and pricing.”

Pamela R.

Kitchener, ON

General ContractorCommercialIntumescent Steel Coating

“Insulated and fireproofed historical timber beams in a heritage loft conversion. Thin-film intumescent kept the wood visible while meeting the 1-hour fire safety code. Outstanding workmanship.”

Benjamin B.

London, ON

BuilderCommercialHeritage Fire Protection

“We had 20,000 sq ft of our logistics warehouse insulated with closed-cell spray foam. The building condensation is completely gone. Their commercial rig handled the project in just three days without interrupting our daily operations.”

Amit P.

Mississauga, ON

Facilities DirectorCommercialWarehouse Insulation

“They insulated a retail commercial building envelope for us. High-performance closed-cell foam acted as both insulation and vapor barrier. Excellent scheduling and pass on code inspection. Highly professional.”

Rajesh S.

Etobicoke, Toronto

General ContractorCommercialCommercial Spray Foam

“Used them for a multi-unit commercial project. They applied closed-cell spray foam on metal stud walls. Passed building code on the first inspection. Clean framing and no overspray. Excellent partner.”

Priya K.

Vaughan, ON

BuilderCommercialOffice Building Insulation

“Critical temperature control was required for our food distribution warehouse. They sprayed closed-cell foam on the ceiling and walls. Amazing condensation control and thermal barrier. Professional commercial crew.”

Muhammad A.

Brampton, ON

Facilities DirectorCommercialCold Storage Spray Foam

“We hired them to insulate a large steel commercial building. The closed-cell spray foam bonds perfectly to metal panels, stopping rust and drafts. Excellent WSIB-compliant, licensed crew.”

Fatima Z.

Markham, ON

Project ManagerCommercialMetal Building Insulation

“They sprayed our large farm workshop and barn walls. Condensation was ruining our equipment. Now the barn is draft-free and dry. Great commercial rates and top quality. Highly recommended.”

Vikram M.

Barrie, ON

Project ManagerCommercialAgricultural Spray Foam

“We use their commercial services for all our industrial buildings. Their rigs are top-of-the-line, and their installers are Caliber Certified (CAN/ULC-S705.2 licensed). Passed building inspections first try.”

Rohan D.

Hamilton, ON

BuilderCommercialCommercial Spray Foam

“Insulated a commercial property crawl space to stop drafts rising into offices. Polyurethane closed-cell foam was applied flawlessly. Punctual crew, WSIB insured, $5M liability coverage. Highly recommended.”

Tariq H.

Oakville, ON

Property ManagerCommercialCommercial Crawl Space

“Professional warehouse insulation project. They covered all our stock with plastic sheeting before spraying. Clean, code-compliant, and on-schedule. Our HVAC energy bills dropped by 35%.”

Yasmin R.

Pickering, ON

Facilities DirectorCommercialWarehouse Insulation

“Hired them to fix condensation in an industrial steel warehouse. Closed-cell spray foam solved the problem completely and added structural rigidity to the metal siding. Outstanding service.”

Sanjay G.

Kitchener, ON

General ContractorCommercialMetal Building Insulation

“Insulated four exterior industrial storage tanks using CCMC-approved closed-cell polyurethane foam. The thermal performance is exceptional. Safe mobilization, certified crews, and zero safety issues.”

Anjali V.

London, ON

Facilities DirectorCommercialSilo & Tank Insulation

“We needed custom shipping containers insulated for mobile office use. They sprayed 2 inches of closed-cell foam on the interior walls. No condensation, perfectly flat finish. Passed inspection easily.”

Chen W.

Toronto Port, Toronto

Project ManagerCommercialShipping Container Insulation

“Hired them to insulate a multi-story apartment building renovation. Spanning five floors, they completed the wall and floor assemblies on schedule. Professional, fully insured, and CCMC certified.”

Mei L.

Mississauga, ON

Property ManagerCommercialMulti-Unit Residential Insulation

“Excellent commercial insulation partner. We use them for all our steel-frame developments. Their high-output mobile rigs are fast, and the foam thickness is highly consistent. Excellent rates.”

Wei Z.

Vaughan, ON

General ContractorCommercialCommercial Spray Foam

“They insulated our older commercial warehouse ceiling. Closed-cell spray foam sealed all the deck joints and stopped winter drafts. We noticed a major reduction in gas bills.”

Ying H.

Brampton, ON

Facilities DirectorCommercialWarehouse Retrofit

“Hired Sprayfoam Solutions to restore our warehouse roof using a hybrid flat roof spray foam and silicone roof coating. No tear-off was required, saving us over $40,000 compared to a traditional roof replacement. The roof is 100% waterproof and reflects heat perfectly.”

Jun Y.

North York, Toronto

Facilities DirectorCommercialFlat Roof Spray Foam & Coating

“Our commercial flat roof was constantly leaking. They applied high-density spray foam and a high-solids silicone coating. It created a seamless, ponding-water resistant membrane. The project was completed on budget with zero downtime for our tenants.”

Linh N.

Mississauga, ON

Property ManagerCommercialFlat Roof Restoration

“Saved our commercial roof without a costly tear-off. They repaired the leaks and applied a reflective silicone coating. Rooftop temperatures dropped significantly, lowering our summer AC costs. Excellent service.”

Jin S.

Vaughan, ON

Facilities DirectorCommercialSilicone Roof Coating

“Outstanding roof restoration project. They applied 3lb high-density spray foam directly over our old membrane. Sealed every roof penetration perfectly. Excellent certified crew, WSIB insured.”

Min-Ji K.

Brampton, ON

Project ManagerCommercialCommercial Flat Roof

“Professional flat roof restoration. Seamless foam and silicone coating has stopped all leaks and significantly improved the building insulation. Professional, licensed team, and competitive pricing.”

Hao T.

Markham, ON

Property ManagerCommercialFlat Roof Restoration

“Great flat roof coating service. They performed a thermal scan to locate wet insulation, replaced those sections, and coated the roof with reflective silicone. 100% leak-proof and energy efficient.”

Raymond C.

Oakville, ON

Facilities DirectorCommercialSilicone Roof Coating

“Insulated and waterproofed our industrial plaza flat roof. Seamless high-density foam stops drafts and water leaks in one shot. Certified installers using CCMC-approved roofing systems.”

Kevin C.

Hamilton, ON

Project ManagerCommercialFlat Roof Spray Foam

“Professional, certified crews. They did a marvelous job applying silicone coating on our warehouse flat roof. Complete ponding water resistance and 20-year durability. Excellent work.”

Steven B.

Barrie, ON

Facilities DirectorCommercialRoof Silicone Coating

“We have used them for two flat roof restorations now. High-density spray foam followed by white reflective silicone. Tenants reported immediate comfort improvements. No leaks, highly recommended.”

Deborah D.

Oshawa, ON

Property ManagerCommercialCommercial Roof Restoration

“Restored our retail store flat roof without interrupting business. Seamless spray foam and silicone coating has survived two harsh winters with zero issues. Great warranties and WSIB insured.”

Edward M.

Kitchener, ON

Facilities DirectorCommercialFlat Roof Restoration

“Excellent roof restoration service. Thermal scan was done first to ensure no wet insulation was covered. The silicone coating application was very clean with no overspray on surrounding cars.”

Stephanie L.

London, ON

Project ManagerCommercialSilicone Roof Coating

“High-density polyurethane foam and reflective coating applied on our manufacturing facility roof. Lowered our cooling costs by 20% last summer. Excellent service, clean, and highly professional.”

Ronald K.

Vaughan, ON

Facilities DirectorCommercialFlat Roof Spray Foam

“We needed a certified 15-minute thermal barrier for a large commercial permit. Their DC315 application was flawlessly done, meeting all Building Code compliance standards on the first inspection. They provided full wet film thickness documentation.”

Rebecca P.

Scarborough, Toronto

General ContractorCommercialDC315 Fire Coating

“Highest rated fireproofing team in the GTA. They arrived within 48 hours for a CAN/ULC-S124 compliant intumescent coating project in a basement suite. The documentation provided was exactly what the inspector needed.”

Anthony G.

Mississauga, ON

General ContractorResidentialSpray Foam & DC315

“We use Sprayfoam Solutions for all our exposed spray foam projects. They apply the closed-cell foam and the DC315 fire coating on the same day—one crew, one mobilization. Saves time and framing stays clean.”

Laura J.

Vaughan, ON

BuilderResidentialDC315 Thermal Barrier

“Highly professional DC315 intumescent coating application on exposed spray foam in our mechanical rooms. The crew verified wet film thickness (WFT) continuously and left a spotless workspace. Passed inspection.”

Albert N.

Brampton, ON

Project ManagerCommercialDC315 Fire Coating

“Ontario Building Code requires a thermal barrier over exposed basement spray foam. Their DC315 application was fast and certified. They provided the CCMC evaluation report immediately for our permit file.”

Cynthia O.

Markham, ON

BuilderResidentialThermal Barrier Code Compliance

“They applied DC315 fire coating over exposed spray foam in an attic storage area. Passed building code inspection first try. Certified applicator, WSIB insured, and same-week scheduling. Excellent.”

Ryan S.

Oakville, ON

General ContractorCommercialDC315 Fire Coating

“We hire them for all our legal duplex conversions. They spray the closed-cell insulation and follow up with DC315 intumescent coating for code-compliant fire safety. Fast, neat, and highly professional.”

Kathleen D.

Hamilton, ON

BuilderResidentialSpray Foam & Fire Coating

“Excellent experience. Certified DC315 application over foam in a commercial mechanical loft. Passed inspection easily. They provided a full documentation package with CCMC evaluation reports.”

Justin F.

Barrie, ON

General ContractorCommercialDC315 Thermal Barrier

“We needed a 15-minute thermal barrier in an unfinished basement remodel. They sprayed the closed-cell foam and followed up with code-compliant DC315 fire coating. Passed building permit inspection.”

Amy W.

Kitchener, ON

BuilderResidentialDuplex Code Compliance

“Certified intumescent fire paint over spray foam. The application was clean with no overspray on steel beams or electrical runs. The crew was professional, polite, and fully WSIB insured.”

Brandon H.

London, ON

General ContractorCommercialDC315 Fire Coating

“Passed our building inspection with flying colors. The DC315 application met the 15-minute thermal barrier requirements under the Ontario building code. Highly professional service and documentation.”

Shirley A.

Oshawa, ON

General ContractorCommercialExposed Foam Fire Code

“Excellent duplex conversion project. They applied closed-cell spray foam and DC315 fire coating in the mechanical room. Outstanding coordination, clean work, and complete code compliance.”

Frank T.

East York, Toronto

BuilderResidentialDC315 Thermal Barrier

“Professional fire barrier application. They applied DC315 over exposed polyurethane spray foam. Certified thickness, verified WFT, and flawless documentation for our project engineers.”

Angela E.

Mississauga, ON

General ContractorCommercialDC315 Fire Coating

“Certified DC315 applicator. They sprayed our custom home crawl space foam and protected the space with ignition barrier coating. Neat, prompt, and completely compliant with local building codes.”

Gregory M.

Vaughan, ON

BuilderResidentialSpray Foam & Fire Paint

“They did a fantastic job with DC315 intumescent coating over foam in our commercial kitchen expansion. CCMC approved, passed municipal inspection first try. Professional and clean crews.”

Anna L.

Oakville, ON

General ContractorCommercialDC315 Thermal Barrier

“Hired them to apply cementitious fireproofing on the structural steel beams of a new commercial parking garage. Professional spray application of SFRM to code thickness. Passed third-party inspections first try with zero thickness issues.”

Fatima Z.

York, Toronto

General ContractorCommercialCementitious Fireproofing

“Excellent structural steel fireproofing service. They sprayed low-density cementitious material on the metal deck and columns. Crew worked safe at heights, fully WSIB compliant, and completed the job on schedule.”

Vikram M.

Mississauga, ON

BuilderCommercialCementitious Fireproofing

“We hire them for all our mid-rise commercial steel projects. Their crews apply cementitious fire resistive material (SFRM) to exact building code thickness. Prompt service, great prices, and fully insured.”

Rohan D.

Vaughan, ON

Project ManagerCommercialStructural Steel Fireproofing

“Passed our building inspection. They applied cementitious fire protection on steel columns in our new industrial building. Professional prep, excellent density control, and spotless cleanup. Great contractor.”

Tariq H.

Brampton, ON

BuilderCommercialCementitious Fireproofing

“Professional SFRM fireproofing contractor. They sprayed structural steel beams to meet 2-hour rating requirements. They provided complete technical documents and W/D ratio thickness charts for local inspectors.”

Yasmin R.

Markham, ON

General ContractorCommercialCommercial Fireproofing

“Sprayed cementitious fireproofing on steel deck and joists for our school project. Outstanding team, certified fireproofing crews, WSIB insured. They completed the work on schedule, passing inspection easily.”

Sanjay G.

Oakville, ON

BuilderCommercialStructural Steel Fireproofing

“Reliable commercial fireproofing contractor. Applied cementitious spray on structural steel beams in our new retail development. Excellent price, fast application, and zero scheduling delays.”

Anjali V.

Hamilton, ON

Project ManagerCommercialCementitious Fireproofing

“We needed medium-density cementitious fireproofing for a semi-exposed commercial parking deck. They applied the Monokote SFRM flawlessly. Passed thickness inspection first try. Outstanding crew.”

Chen W.

Barrie, ON

General ContractorCommercialParking Garage Fireproofing

“Great experience. They sprayed structural steel columns on our new commercial warehouse. The application thickness met all building code requirements. Highly professional, certified crews.”

Mei L.

Whitby, ON

BuilderCommercialCommercial Fireproofing

“Hired them to fireproof steel framing in a commercial office. They applied cementitious spray to exact specification and cleaned up every scrap of overspray. Passed inspections without issues.”

Wei Z.

Kitchener, ON

Project ManagerCommercialStructural Steel Fireproofing

“Highly professional SFRM application. They worked around our other trades to fireproof structural columns on schedule. Clean work, CCMC approved materials, WSIB insured. Will use again.”

Ying H.

London, ON

General ContractorCommercialCementitious Fireproofing

“We hired Sprayfoam Solutions to apply thin-film intumescent fire coating on architecturally exposed structural steel (AESS) beams in our new corporate headquarters lobby. The finish is incredibly smooth and looks like paint, yet provides a certified 2-hour fire rating. Passed third-party DFT testing first try.”

Jun Y.

Downtown Toronto, Toronto

General ContractorCommercialIntumescent Steel Fireproofing

“Outstanding thin-film intumescent application on exposed steel columns in a retail space. The architects wanted the steel visible, so cementitious was out. They did a marvelous job, primer and topcoat were perfectly applied.”

Linh N.

Mississauga, ON

BuilderCommercialIntumescent Fire Protection

“They applied intumescent coating on exposed timber beams in a heritage building restoration. Achieved code fire rating while preserving the historical wooden structure. Excellent workmanship, clean and professional.”

Jin S.

The Annex, Toronto

General ContractorCommercialAESS Fireproofing

“Excellent intumescent application for exposed structural steel in a commercial office. They verified dry film thickness (DFT) meticulously and provided complete documentation for the fire marshal. Passed inspection.”

Min-Ji K.

Vaughan, ON

Project ManagerCommercialIntumescent Steel Coating

“Hired them to apply intumescent fireproofing on steel structural columns in a new restaurant. Smooth finish, CAN/ULC-S101 compliant, and completed on schedule. Great contractor and pricing.”

Hao T.

Brampton, ON

BuilderCommercialThin-Film Intumescent

“Professional intumescent coating application on steel framing. Architects specified exposed steel look. This thin-film coating expanded perfectly in fire testing. Certified crews, WSIB insured, $5M liability.”

Raymond C.

Markham, ON

General ContractorCommercialAESS Fire Protection

“We needed a 1-hour fire rating on exposed structural steel columns. They applied thin-film water-based intumescent. Excellent smooth paint-like finish, on schedule, and zero issues with building code inspector.”

Kevin C.

Oakville, ON

Project ManagerCommercialIntumescent Fireproofing

“Great thin-film intumescent coating service. They worked weekends to prevent disrupting our ongoing commercial tenant operations. The finish looks spectacular and meets building code. Highly recommended.”

Raymond K.

Hamilton, ON

BuilderCommercialIntumescent Steel Coating

“They applied intumescent fire paint on exposed structural steel columns in a new school library. Smooth AESS finish, WSIB insured, same-week scheduling. Excellent coordination with our drywallers.”

Brenda C.

Barrie, ON

General ContractorCommercialIntumescent Fire Protection

“Professional thin-film intumescent application on exposed steel rafters. Excellent dry film thickness (DFT) reports provided. Passed building inspections first try. Best fireproofing contractor.”

Samuel G.

Pickering, ON

BuilderCommercialAESS Fireproofing

“They sprayed thin-film intumescent over steel framing in our commercial renovation. Cured quickly and was ready for topcoat in 24 hours. Certified crews, outstanding workmanship and pricing.”

Pamela R.

Kitchener, ON

General ContractorCommercialIntumescent Steel Coating

“Insulated and fireproofed historical timber beams in a heritage loft conversion. Thin-film intumescent kept the wood visible while meeting the 1-hour fire safety code. Outstanding workmanship.”

Benjamin B.

London, ON

BuilderCommercialHeritage Fire Protection

THE SPRAY FOAM EXPERTS

That Actually Lower Your Energy Bills
★★★★★5.0 Google Rating•55+ Verified Reviews•Serving Across Ontario
STEP 1: 60-SECOND PRICE CHECK
LOCK IN DIRECT CONTRACTOR PRICING

Fast Response & Quotes · No Commitment!

Tap to Select Your Project:
or call directly: 647-333-3626
VERIFIED, CERTIFIED & LISTED ON
Google5.0 ★ Verified
HomeStarsVerified Pro
Houzz ProListed Contractor
TrustedProsCanadian Directory
Caliber CertifiedCAN/ULC-S705.2
WSIB & CCMCOntario Cleared

Proudly Serving Toronto, GTA & All of Ontario

Direct contractor pricing · Caliber Certified (CAN/ULC-S705.2) Installers · $0 Travel Fee Across Ontario

Sprayfoam Solutions service coverage map across Toronto, GTA and Ontario
50+ Cities & Municipalities

With regional mobile crews stationed right near you, we charge $0 travel fees and stand as the best, most trusted contractor to serve your home or commercial building anywhere in Ontario.

WSIB Insured
6,500+ Projects Completed
Get My Price in 60s →

Get Your Free Quote

Takes 10 seconds — we'll call you back.

Free Estimate No Obligation WSIB Cleared Licensed Caliber Certified
Call 647-333-3626 (7AM–9PM)
SERVING ALL ONTARIO:Ajax • Aurora • Barrie • Belleville • Bracebridge • Brampton • Brant • Brantford • Brock • Brockville • Burlington • Caledon • Cambridge • Chatham-Kent • Clarington • Collingwood • Cornwall • East Gwillimbury • Etobicoke • Fort Erie • Gravenhurst • Grimsby • Guelph • Halton Hills • Hamilton • Huntsville • Innisfil • Kawartha Lakes • King • Kingston • Kitchener • Lincoln • London • Markham • Milton • Mississauga • Muskoka • Newmarket • Niagara Falls • North York • Oakville • Orillia • Oshawa • Ottawa • Parry Sound • Pelham • Peterborough • Pickering • Port Colborne • Richmond Hill • Sarnia • Scarborough • Scugog • St. Catharines • St. Thomas • Stratford • Thorold • Toronto • Uxbridge • Vaughan • Wainfleet • Waterloo • Welland • West Lincoln • Whitby • Whitchurch-Stouffville • Windsor • Woodstock•Ajax • Aurora • Barrie • Belleville • Bracebridge • Brampton • Brant • Brantford • Brock • Brockville • Burlington • Caledon • Cambridge • Chatham-Kent • Clarington • Collingwood • Cornwall • East Gwillimbury • Etobicoke • Fort Erie • Gravenhurst • Grimsby • Guelph • Halton Hills • Hamilton • Huntsville • Innisfil • Kawartha Lakes • King • Kingston • Kitchener • Lincoln • London • Markham • Milton • Mississauga • Muskoka • Newmarket • Niagara Falls • North York • Oakville • Orillia • Oshawa • Ottawa • Parry Sound • Pelham • Peterborough • Pickering • Port Colborne • Richmond Hill • Sarnia • Scarborough • Scugog • St. Catharines • St. Thomas • Stratford • Thorold • Toronto • Uxbridge • Vaughan • Wainfleet • Waterloo • Welland • West Lincoln • Whitby • Whitchurch-Stouffville • Windsor • Woodstock

About Sprayfoam Solutions Toronto Inc

6,500+ projects completed since 2008. The Greater Toronto Area's trusted spray foam insulation & fireproofing contractor for commercial builders, general contractors, and homeowners.

647-333-3626Request a Quote
50 Howden Rd, Scarborough, ON M1R 3E4
100% Canadian Owned & OperatedLicensed • Up to $10M Insured • WSIB Clearance

Our Services

  • ›Spray Foam (Residential)
  • ›Spray Foam (Commercial)
  • ›Interior Sound Dampening
  • ›Fire Coating DC315
  • ›Cementitious Fireproofing
  • ›Intumescent Coating

Expert Guides

  • What is Spray Foam Insulation?
  • How Much Does Spray Foam Cost?
  • Our Chemicals & Technical Data
  • Customer Reviews (5.0 ★)
  • View Our Projects
  • Book Free On-Site Inspection

Areas We Serve

  • •Toronto & Central GTA
  • •Mississauga & Peel
  • •Oakville & Halton
  • •Vaughan & York Region
  • •Barrie & Simcoe County
  • •Muskoka & Cottage Country
  • •Waterloo & Tri-Cities
  • •Oshawa & Durham Region
  • + View All 50+ Cities
All project estimates, pricing illustrations, R-value metrics, and building code references on this website are for general informational purposes only and do not constitute a certified estimate or binding offer to contract. Formal written contracts provided by Sprayfoam Solutions Toronto Inc. following an on-site inspection strictly supersede all online representations. Subject to our Terms of Service and Privacy Policy.
AboutView Our WorkCustomer Reviews 5.0 ★CertificationsServicesAreas We ServeBlogContact UsTerms of ServicePrivacy Policy
© 2026 Spray Foam Solutions Toronto Inc. All Rights Reserved.