
18,500 Sq Ft Corrugated Steel Roof & Wall Envelope
Eliminated roof condensation, cut heater runtime by 42%, and passed Part 3 fire inspection on the first visit.
Insulate and fire-rate your building in one coordinated mobilization. Our certified crews install 2 lb closed-cell spray foam and single-coat IFTI DC315® thermal barrier—saving $3.50–$5.00/sq ft vs. framing and drywall.

Built for warehouses, metal buildings, basements, crawl spaces, mechanical rooms, and garages where exposed foam requires Ontario Building Code protection.
Monolithic thermal, air, and Class II vapour barrier sprayed to a smooth, coating-ready profile.
Single-coat airless application delivering mandatory Ontario Building Code fire protection without drywall.
* Phase 1 (2 lb Closed-Cell Spray Foam) + Phase 2 (18–21 mils IFTI DC315®) expands 35x–50x at 200°C+ into a carbon char shield that protects the foam core from ignition for 15+ minutes.
Our certified team controls both the closed-cell foam surface profile and DC315® coating application, preventing peeling or failed inspections.
Because 2 lb closed-cell foam cures rapidly, our crew transitions directly from foam proportioners to airless DC315 rigs in one coordinated visit.
Receive both your Caliber CAN/ULC-S705.2 Spray Foam Placard and your signed CCMC #14036-R Thermal Barrier Certificate together.
Save 15%–25% by bundling both phases in a single mobilization with unified municipal permit documentation.
Complete 2 lb closed-cell spray foam + certified IFTI DC315® thermal barrier for exposed residential zones.
Insulate and fire-rate exposed foundations, crawl spaces, or unvented attics without stud framing or drywall.
High-production closed-cell foam + DC315 thermal barrier for warehouses, metal shops, Quonsets & Sea-Cans.
| Turnkey Application Scope | Phase 1: Closed-Cell SPF Spec | Phase 2: DC315 Fire Coating Spec | 2026 Combined Rate / Sq Ft | Savings vs. Framing + Drywall |
|---|---|---|---|---|
| Commercial Warehouse / Metal Building Deck | 2.0"–3.0" Closed-Cell (R-12 to R-18) | 18–21 mils WFT (Ice White / Charcoal) | $4.25 – $6.85 / sq ft | Saves 100% of strapping & boarding cost |
| Unfinished Basement & Crawl Space Walls | 2.5"–3.5" Closed-Cell (R-15 to R-21) | 18 mils WFT / 12 mils DFT (CAN/ULC-S124) | $4.50 – $6.95 / sq ft | Saves $3.50–$5.00/sq ft vs. studs + drywall |
| Mechanical, Furnace & Boiler Utility Rooms | 3.5" Closed-Cell SPF (R-21) | 18–21 mils WFT over tight pipe/duct bays | $5.25 – $7.85 / sq ft | Passes inspection where drywall cannot fit |
| Attached Garage Ceiling Under Bonus Room | 5.0" Closed-Cell SPF (R-31 + Gas Seal) | 18–21 mils WFT across exposed joists/beams | $5.75 – $8.25 / sq ft | Dual thermal + Ontario Building Code fire pass |
| 20ft / 40ft Shipping Container (Sea-Can) | 2.0"–3.0" Closed-Cell SPF (Zero Sweat) | 18 mils WFT Durable Interior Latex Finish | $2,650 – $5,450 (Full Container) | Preserves 100% of interior cargo width |

Eliminated roof condensation, cut heater runtime by 42%, and passed Part 3 fire inspection on the first visit.

Encapsulated congested PEX manifolds, ERV ductwork, and steel beams where 1/2" drywall could not fit.

Delivered a bright-white thermally sealed interior with full municipal building permit sign-off.

Saved $8,400 compared to framing perimeter stud walls and hanging drywall while passing occupancy inspection.
Direct contractor pricing · CAN/ULC-S101 & S124 Certified · $0 Travel Fee Across Ontario
With regional mobile crews stationed right near you, we charge $0 travel fees and stand as the best, most trusted contractor to serve your home or commercial building anywhere in Ontario.