Sprayfoam SolutionsWe Serve GTA & Across Ontario!
Home

Residential

Major Projects
  • Custom New Homes
  • Additions & Renovations
  • Muskoka Cottages & Homes
  • Exterior Walls
  • Interior Ceiling Sound Dampening
Targeted Areas
  • Basements
  • Attics & Roof Decks
  • Crawl Spaces
  • Rim Joist Headers
  • Garages & Floors Over Garage
  • Cathedral Ceilings
  • Cantilevers & Overhangs
  • Under-Slab & Radiant Floors
  • Cold Rooms
  • RVs & Vans
  • Swimming Pools

Commercial

Buildings & Facilities
  • Commercial SPF & Fire Coating
  • Warehouse & Industrial
  • Metal Buildings
  • Barns & Agricultural
  • Multi-Unit Buildings
  • Flat Roof Systems
Specialty
  • Shipping Containers
  • Silos & Water Tanks

Code & Expert Guides

  • What is Spray Foam?
  • Cost of Spray Foam
  • Our Sprayfoam Chemicals
  • Certifications & Standards
  • Spray Foam Knowledge Base
Ontario Code & ULC Guides
  • Ontario R-Value & Code Guide
  • CAN/ULC-S705.2 Code Rules
  • Open-Cell vs. Closed-Cell

Thermal Barriers (Foam)

Core Systems
  • DC315 Intumescent Coating
  • Sprayfoam & Fire Coating (2-in-1)
Where Code Requires It
  • Mechanical & Furnace Rooms
  • Exposed Basements & Crawls
  • Attached Garage Ceilings
  • Warehouse Exposed Foam Decks
  • Unvented Attics & Roof Decks
  • Rim Joists & Floor Headers

Structural Fireproofing

Fireproofing Systems
  • Cementitious Fireproofing (SFRM)
  • Intumescent Fire Coating (Thin-Film)
Structural Assemblies
  • Structural Beams & Columns
  • Metal Floor & Roof Decks
  • Commercial Parkades & Garages
  • Architectural Exposed Steel (AESS)
  • Request Fire Spec & Quote

Code & Expert Guides

  • What is DC315 Fire Coating?
  • Cost of DC315 Fire Coating
  • Our Fire Coating Chemicals
  • Certifications & Standards
  • Fire Coating Knowledge Base
Ontario Code & ULC Guides
  • Ontario 15-Min Thermal Barrier
  • ULC 1–4 Hr Steel Ratings
  • DC315 vs. Type X Drywall
Locations
Ontario Service RegionsView All 50+ Cities →
Toronto & Central
Toronto · Etobicoke · North York · Scarborough
Peel Region
Mississauga · Brampton · Caledon
York Region
Vaughan · Markham · Richmond Hill · Newmarket
Halton Region
Oakville · Burlington · Milton · Halton Hills
Durham Region
Pickering · Whitby · Oshawa · Ajax · Clarington
Hamilton & Niagara
Hamilton · St. Catharines · Niagara Falls · Brantford
Kitchener / Waterloo / Guelph
Kitchener · Waterloo · Cambridge · Guelph
Barrie & Simcoe County
Barrie · Orillia · Innisfil · Collingwood
Muskoka & Cottage Country
Muskoka · Huntsville · Gravenhurst · Bracebridge
Windsor & Southwestern ON
Windsor · London · Sarnia · Chatham-Kent
Our WorkReviews
Contact UsGet My Pricing
Serving GTA & Beyond
Sprayfoam SolutionsWe Serve GTA & Across Ontario!
Home
Spray Foam Services
Overview & Guides
What is Spray Foam?Cost of Spray FoamOpen-Cell vs. Closed-CellOntario R-Value & Code Guide
Project Applications
Custom New HomesAdditions & RenovationsMuskoka Cottages & HomesExterior WallsInterior Ceiling Sound DampeningBasementsAttics & Roof DecksCrawl SpacesRim Joist HeadersGarages & Floors Over GarageCathedral CeilingsCantilevers & OverhangsUnder-Slab & Radiant FloorsCold RoomsRVs & VansSwimming Pools
Overview & Guides
Commercial SPF & Fire Coating OverviewCAN/ULC-S705.2 Code RulesCost of Spray Foam
Project Applications
Warehouse & IndustrialMetal BuildingsBarns & AgriculturalMulti-Unit BuildingsFlat Roof SystemsShipping ContainersSilos & Water Tanks
Overview & Guides
Our Sprayfoam ChemicalsCertifications & StandardsSpray Foam Knowledge Base
Fire Coatings
Overview & Guides
DC315 Fire Coating OverviewSprayfoam & DC315 Package (2-in-1)What is DC315 Fire Coating?Cost of DC315 Fire CoatingDC315 vs. Type X DrywallOntario 15-Min Thermal Barrier
Project Applications
Mechanical & Furnace RoomsExposed Basements & CrawlsAttached Garage CeilingsWarehouse Exposed Foam DecksUnvented Attics & Roof DecksRim Joists & Floor Headers
Overview & Guides
Intumescent Fire Coating OverviewULC 1–4 Hr Steel Fire Ratings
Project Applications
Structural Beams & ColumnsArchitectural Exposed Steel (AESS)Request Fire Spec & Quote
Overview & Guides
Cementitious Fireproofing OverviewULC 1–4 Hr Steel Fire Ratings
Project Applications
Metal Floor & Roof DecksCommercial Parkades & GaragesRequest Fire Spec & Quote
Overview & Guides
Our Fire Coating ChemicalsCertifications & StandardsFire Coating Knowledge Base
Ontario Service RegionsView All 50+ Cities →
Toronto & Central
Toronto · Etobicoke · North York · Scarborough
Peel Region
Mississauga · Brampton · Caledon
York Region
Vaughan · Markham · Richmond Hill · Newmarket
Halton Region
Oakville · Burlington · Milton · Halton Hills
Durham Region
Pickering · Whitby · Oshawa · Ajax · Clarington
Hamilton & Niagara
Hamilton · St. Catharines · Niagara Falls · Brantford
Kitchener / Waterloo / Guelph
Kitchener · Waterloo · Cambridge · Guelph
Barrie & Simcoe County
Barrie · Orillia · Innisfil · Collingwood
Muskoka & Cottage Country
Muskoka · Huntsville · Gravenhurst · Bracebridge
Windsor & Southwestern ON
Windsor · London · Sarnia · Chatham-Kent
Our WorkReviewsContact Us
More Info & Resources
› About Us› Certifications› All Services› Blog & Guides
We Serve GTA & Across Ontario!
Get My Pricing 647-333-3626
ONTARIO WATER STORAGE TANK & SILO INSULATION SPECIALISTS
5.0 Google Rating·45+ Verified Reviews

Water Storage Tank & Silo Insulation Contractor
2 lb Closed-Cell Spray Foam & UV Coating Specialist

2026 Quick Summary & Ballpark Cost

Hiring a certified water storage tank insulation contractor and storage tank insulation specialist in Ontario costs $3.25 to $6.85+ per sq. ft. installed in 2026 ($8,500–$65,000+ per vessel). Our Caliber Certified (CAN/ULC-S705.2 Licensed) Commercial Spray Foam Installers apply seamless CAN/ULC-S705.1 2 lb closed-cell foam bonded to curved steel or concrete tanks and silos, protected with UV elastomeric, polyurea, or IFTI DC315® topcoats.

-$250 Estimate Credit
Get My Price in 60s 647-333-3626
Caliber Certified (CAN/ULC-S705.2) InstallersWSIB & Up to $10M InsuredCCMC Approved Foam Systems
Silo & Water Tank Spray Foam Insulation Toronto project 1Silo & Water Tank Spray Foam Insulation Toronto project 2Silo & Water Tank Spray Foam Insulation Toronto project 3Silo & Water Tank Spray Foam Insulation Toronto project 4Silo & Water Tank Spray Foam Insulation Toronto project 5
Silo & Water Tank Spray Foam Insulation — Certified Ontario Installation

Instant Price Estimate

Get your spray foam price & $250 Credit in 60s.

Caliber S705.2 Certified
WSIB Insured
OR QUICK QUOTE HERE

THE SPRAY FOAM EXPERTS

That Actually Lower Your Energy Bills
★★★★★5.0 Google Rating•55+ Verified Reviews•Serving Across Ontario
Tap to Select Your Project:
or call directly: 647-333-3626

Our Canadian Suppliers, Partners, Clients & Credentials

Canadian Owned logo
Mattamy Homes logo
WSIB Ontario logo
Treasure Hill logo
Huntsman logo
Minto logo
Carlisle logo
Daniels logo
Soprema logo
Geranium logo
THE SMART CHOICE

The Cost of Poor Insulation vs. Your Long-Term ROI

Standard insulation methods fail on cylindrical steel vessels, trapping moisture and causing accelerated rust and thermal loss. Direct-to-metal closed-cell spray foam forms a gap-free monolithic thermal envelope.

BUILDING RISK AUDIT

1. Long-Term Risks & The Sprayfoam Cure

Click any common building issue below to see the solution comparison on the right:

1
Extreme diurnal temperature swings causing interior steel wall condensation — leading to grain spoilage, caking, mold growth, and mycotoxin contamination
STANDARD INSULATION (Fails in 5-10 yrs)

Trying to wrap a curved silo in rigid foam boards leaves major air gaps at joints, letting warm air bypass the insulation completely.

THE SPRAYFOAM SOLUTION: Cylindrical Surface Bonding
SPRAYFOAM ADVANTAGE (Monolithic Barrier)

Liquid closed-cell foam is sprayed directly onto the steel, conforming perfectly to any radius and creating a seamless, gap-free envelope.

2
Fire-protection reservoirs, municipal water tanks, and livestock storage vessels freezing during -30°C Ontario winters — bursting valves, risers, and heat-trace lines
3
Accelerated Corrosion Under Insulation (CUI) from moisture trapped between curved steel walls and gapped rigid board or mineral wool wraps
4
Pest, rodent, and bird infiltration through seams in mechanically fastened blankets — contaminating stored feed, grain, and agricultural commodities
5
Massive glycol chiller and boiler energy waste on brewery, winery, and anaerobic digester tanks lacking continuous R-18 to R-25+ thermal envelopes
6
Uncoated foam or paint-only systems chalking and delaminating within 18–24 months under direct Ontario UV radiation and hail impact
STANDARD INSULATION (Fails in 5-10 yrs)

Trying to wrap a curved silo in rigid foam boards leaves major air gaps at joints, letting warm air bypass the insulation completely.

THE SPRAYFOAM SOLUTION: Cylindrical Surface Bonding
SPRAYFOAM ADVANTAGE (Monolithic Barrier)

Liquid closed-cell foam is sprayed directly onto the steel, conforming perfectly to any radius and creating a seamless, gap-free envelope.

ENGINEERED MONOLITHIC PERFORMANCE

Unlike conventional insulation materials that sag, settle, or degrade over time, closed-cell polyurethane foam cures to an airtight, continuous barrier bonded directly to the substrate.

FINANCIAL CASE STUDY

2. Commercial ROI & Long-Term Financial Payback

Verified benchmarks based on a typical 15,000 Gal Agricultural / Industrial Silo & Tank

$90,000 – $144,000
Estimated 20-Year Savings
2 – 3 years
Payback Period
$4,500 – $7,200
Annual Utility Savings
40 – 60%
Energy Cost Reduction
Year 1: InstallInstant 40-60% utility reduction
Years 3-5: BreakevenInvestment fully paid back
Years 6-20+: ProfitHundreds of thousands saved
Eliminates silo sweating — prevents grain rot, caking, and mycotoxins
Stops winter tank freeze expansion and burst fittings
Bonds directly to curved steel with zero rust-trapping air pockets
Get My Price in 60s
The Solution

Why Ontario Operators Choose Our Dual-Layer Tank & Silo Spray Foam System

SPRAY FOAM

100% Monolithic Bond to Cylindrical & Conical Geometry

CAN/ULC-S705.1 2 lb closed-cell spray foam expands and bonds directly to corrugated steel, bolted carbon steel, stainless steel, and precast concrete tanks. Zero joints, zero convection loops behind boards, and R-6.0 to R-6.2 per inch aged LTTR.

PROTECTIVE COATING

Turnkey UV Elastomeric, Silicone & Polyurea Topcoats

Under Turnkey Single-Contractor Accountability, our Caliber Certified (CAN/ULC-S705.2 Licensed) Commercial Spray Foam Installers apply high-build silicone, acrylic elastomeric, or polyurea weather-shield coatings directly over cured foam for 20+ year UV and hail durability.

SPRAY FOAM

Dew-Point Control & Corrosion Under Insulation (CUI) Prevention

At 1.5" to 2.0"+ thickness, closed-cell spray foam forms a monolithic Class II vapour retarder (<45 ng/Pa·s·m²) that locks out atmospheric moisture, stops interior silo sweating, and prevents hidden steel shell corrosion.

SPRAY FOAM

Freeze Protection & Process Temperature Stabilization

Whether maintaining +38°C mesophilic anaerobic digesters, -2°C Niagara wine fermentation jackets, or freeze-critical fire suppression water tanks, closed-cell spray foam slashes thermal transfer and chiller/heater runtime by 40–60%.

Silo & Water Tank Spray Foam Insulation benefit 1
Silo & Water Tank Spray Foam Insulation benefit 2
Silo & Water Tank Spray Foam Insulation benefit 3
Silo & Water Tank Spray Foam Insulation benefit 4

THE SPRAY FOAM EXPERTS

That Actually Lower Your Energy Bills
★★★★★5.0 Google Rating•55+ Verified Reviews•Serving Across Ontario
STEP 1: 60-SECOND PRICE CHECK
LOCK IN DIRECT CONTRACTOR PRICING

Fast Response & Quotes · No Commitment!

Tap to Select Your Project:
or call directly: 647-333-3626
VERIFIED, CERTIFIED & LISTED ON
Google5.0 ★ Verified
HomeStarsVerified Pro
Houzz ProListed Contractor
TrustedProsCanadian Directory
Caliber CertifiedCAN/ULC-S705.2
WSIB & CCMCOntario Cleared
Our Process

How We Insulate & Coat Your Silo, Water Tank or Process Vessel

1

Vessel Thermal Audit & Dew-Point Engineering

Fast 60-Sec Digital Estimate or Site Walk

We evaluate vessel diameter, shell height, steel/concrete substrate condition, operating temperature differential, and Ontario Building Code or NFPA 22 freeze-protection targets.

2

Abrasive Prep, Priming & Containment Masking

1 Day Prep & Containment

Tank surfaces are pressure-washed, degreased, de-rusted, and primed for maximum adhesion. Valves, manways, sight glasses, and adjacent equipment are fully masked.

3

CAN/ULC-S705.1 2 lb Closed-Cell Foam Application

2,500–6,000+ sq ft / day per rig

Caliber Certified (CAN/ULC-S705.2 Licensed) Commercial Spray Foam Installers apply multi-lift passes (1.5" to 4.0"+) around cylindrical walls, Hopper cones, and dome roofs.

4

UV Elastomeric / Polyurea Topcoat & QA Sign-Off

Turnkey Single-Contractor Accountability

We spray the UV-stable elastomeric, polyurea, or interior IFTI DC315® thermal barrier topcoat, verify dry-mil thickness, and issue CAN/ULC-S705.2 Daily Work Records.

Silo & Water Tank Spray Foam Insulation project photo 1
Silo & Water Tank Spray Foam Insulation project photo 2
Technical Specs

What We Use & Why

Foam Type

CAN/ULC-S705.1 Medium-Density 2 lb Closed-Cell SPF + UV Elastomeric Coating

Conforms seamlessly to curved cylindrical steel and concrete shells where rigid board gaps and mineral wool sags. Delivers R-6.0 to R-6.2/inch aged LTTR, high compressive strength (≥170 kPa), and an integrated Class II vapour retarder.

Thickness

1.5"–2.0" (Silo Sweat Control) to 3.0"–4.0"+ (Freeze & Digester Control)

R-Value

R-12 to R-25+ Continuous (Zero Joint Thermal Bridging)

2026 Ontario Pricing & Code Specs

2026 Silo, Water Tank, Winery Vessel & Digester Spray Foam Cost Guide (Ontario)

Transparent 2026 Ontario installed rates per square foot and turnkey vessel budgets. Get a $250 Credit on Your Estimate — Check Your Price in 60 Seconds (`/price-chat`) • No Site Visit Required.

INTERIOR SILO & HOPPER DEW-POINT CONTROL

Interior Silo Cone & Condensation Sweep (1.5"–2")

$2.95 – $4.25
/ sq ft installed
  • 1.5" to 2.0" CAN/ULC-S705.1 2 lb closed-cell spray foam (~R-9 to R-12)
  • Stops interior steel wall sweating, grain caking & mold at the dew point
  • Seals bolted seams, hopper cones, aeration transitions & roof rings
  • Includes CAN/ULC-S705.2 Daily Work Record by Caliber Certified Installers
Get My Price in 60s →
MOST POPULAR — EXTERIOR TANK + UV COATING

2"–3" Exterior Tank Spray Foam + Elastomeric UV Topcoat

$4.75 – $6.85
/ sq ft installed
  • 2.0" to 3.0" 2 lb closed-cell foam (R-12 to R-18.5+ continuous LTTR)
  • High-build UV silicone or acrylic elastomeric weather-shield topcoat
  • Ideal for municipal/fire water tanks, farm silos & winery/brewery vessels
  • Turnkey Single-Contractor Accountability — foam + UV coating in one mobilization
Get My Price in 60s →
HEAVY INDUSTRIAL & ANAEROBIC DIGESTER SPEC

Cryogenic, Digester & Process Vessel High-R System (4"+)

$6.50 – $9.50
/ sq ft installed
  • 4.0"+ multi-pass 2 lb closed-cell spray foam (R-24 to R-30+ thermal shell)
  • Heavy-duty aliphatic/aromatic polyurea or high-build elastomeric shield
  • Engineered for +38°C anaerobic digesters, chemical tanks & -30°C freeze protection
  • Full wet/dry mil verification, CCMC data sheets & WSIB / $5M liability package
Get My Price in 60s →
Vessel / Tank Type & Surface AreaFoam & Topcoat SpecificationTarget Thermal / Code Performance2026 Cost Per Sq FtTypical Installed Vessel Total
Agricultural Grain Silo Cone & Lower Ring (2,500 sq ft)1.5"–2.0" 2 lb Closed-Cell SPFR-9 to R-12 Dew-Point & Pest Seal$2.95 – $4.25 / sq ft$7,375 – $10,625
Fire Suppression / Potable Water Tank (4,500 sq ft Exterior)2.5" 2 lb SPF + Silicone UV TopcoatR-15.5 Freeze Protection + UV Shield$4.95 – $6.40 / sq ft$22,275 – $28,800
Winery / Brewery Glycol Fermentation Tanks (3,000 sq ft Multi-Tank)3.0" 2 lb SPF + Washdown ElastomericR-18.5 Chiller Load Stabilization$5.25 – $6.85 / sq ft$15,750 – $20,550
Full Exterior Commercial Storage Silo (8,000 sq ft Cylinder + Dome)2.5"–3.0" 2 lb SPF + UV ElastomericR-15.5 to R-18.5 Monolithic Envelope$4.75 – $6.50 / sq ft$38,000 – $52,000
Biogas Anaerobic Digester / Chemical Process Vessel (10,000+ sq ft)4.0" 2 lb SPF + Polyurea / ElastomericR-24.5+ Process Heat Retention$6.50 – $9.50 / sq ft$65,000 – $95,000+
-$250 Estimate Credit

60-Second Instant Ballpark

Get My Price in 60s 647-333-3626

Industrial Silo, Water Tank & Process Vessel CAN/ULC-S705.1 Technical Specification Ledger

2026 ONTARIO TANK & VESSEL SPEC
Material & Installation Standard
CAN/ULC-S705.1 Medium-Density 2 lb Closed-Cell Spray Foam installed per CAN/ULC-S705.2 by Caliber Certified (CAN/ULC-S705.2 Licensed) Commercial Spray Foam Installers
Ontario Building Code Target
Ontario Building Code Part 3 / Part 9 & SB-10 Thermal Envelope Compliance; NFPA 22 Water Tank Freeze Protection; Indoor Thermal Barrier per Ontario Building Code 3.1.4.2 & 9.10.17.10
Aged Thermal Resistance (LTTR)
R-6.0 to R-6.2 per inch (CAN/ULC-S770 Long-Term Thermal Resistance) — R-12 at 2.0", R-18.5 at 3.0", R-24.5+ at 4.0"
Curved Substrate / Adhesion Performance
Monolithic direct-to-steel and concrete tensile adhesion (>170 kPa compressive strength per ASTM D1621) — zero board seams or annular air gaps
Vapour Permeance
< 45 ng/(Pa·s·m²) at 38–50 mm (Class II Vapour Retarder — prevents Corrosion Under Insulation [CUI] on cold or cycled vessels)
Approved CCMC Chemical Systems
BASF Walltite® Eco v.3, Huntsman Building Solutions (Icynene/Demilec), Johns Manville & other approved CCMC spray foam chemicals
UV Elastomeric / Fire Coating Topcoat
Exterior: High-Solids Silicone / Acrylic Elastomeric or Polyurea UV Shield (20–40+ mils DFT); Interior Occupied Buildings: IFTI DC315® (CAN/ULC-S124 15-Min Thermal Barrier)
Warranty & Documentation
Turnkey Single-Contractor Accountability — WSIB Clearance, $5M Commercial Liability, CAN/ULC-S705.2 Daily Work Records & Coating DFT Verification Logs
Expert Insights

In-Depth: Silo & Water Tank Spray Foam Insulation

4 min read

Curved steel grain silos and industrial storage tanks suffer from two destructive moisture mechanisms in Ontario: interior head-space condensation (causing grain caking, mold, and mycotoxins) and Corrosion Under Insulation (CUI) when water vapour gets trapped behind gapped rigid board or fibrous wraps.

By spraying CAN/ULC-S705.1 2 lb closed-cell foam directly onto primed steel, our Caliber Certified (CAN/ULC-S705.2 Licensed) Commercial Spray Foam Installers eliminate the air space between insulation and substrate. At 1.5"–2.0"+, the foam acts as both a monolithic thermal break (R-6.0 to R-6.2/inch LTTR) and a Class II vapour retarder (<45 ng/Pa·s·m²). Read our Metal Building & Steel Condensation Guide for full dew-point engineering.

Vessel TypePrimary Thermal Goal2026 Recommended System
Grain & Feed SilosStop interior wall sweating & grain rot1.5"–2.0" 2 lb SPF ($2.95–$4.25/sq ft)
Fire & Municipal Water Tanks-30°C freeze protection & valve safety2.5"–3.5" 2 lb SPF + Silicone UV ($4.95–$6.85/sq ft)
Winery & Brewery VesselsGlycol chiller efficiency & sweat control2.5"–3.0" 2 lb SPF + Washdown Coat ($5.25–$6.85/sq ft)
Anaerobic Digesters (Biogas)Maintain +38°C mesophilic digestion4.0"+ 2 lb SPF + Polyurea/UV Shield ($6.50–$9.50/sq ft)

Every installation is backed by Turnkey Single-Contractor Accountability — surface prep, closed-cell spray foam, and protective coating executed by one crew in one mobilization.

When tanks or hoppers are situated inside occupied agricultural, food-processing, or industrial buildings, Ontario Building Code Articles 3.1.4.2 and 9.10.17.10 mandate a 15-minute thermal barrier over exposed foam. Our Caliber Certified (CAN/ULC-S705.2 Licensed) Commercial Spray Foam Installers apply certified IFTI DC315® intumescent coating (CAN/ULC-S124) under Turnkey Single-Contractor Accountability. For exterior vessels exposed to sun, wind, and hail, we apply UV-stable silicone elastomeric or polyurea coatings (see our SPF & Elastomeric Coating System Guide).

FAQ

Frequently Asked Questions

How much does silo, water tank, or digester spray foam insulation cost per sq ft in Ontario in 2026?
In 2026, silo and industrial tank spray foam insulation in Ontario costs $2.95 to $4.25 per sq. ft. for a 1.5"–2.0" interior condensation-control pass, $4.75 to $6.85 per sq. ft. for a 2.0"–3.0" exterior 2 lb closed-cell system with a UV-stable elastomeric topcoat, and $6.50 to $9.50 per sq. ft. for 4.0"+ high-R anaerobic digester or cryogenic vessel assemblies. Typical turnkey vessel projects range from $7,500 to $65,000+. Get a $250 Credit on Your Estimate — Check Your Price in 60 Seconds at /price-chat • No Site Visit Required.
Why does closed-cell spray foam outperform rigid board and mineral wool on curved cylindrical tanks?
Flat rigid insulation boards and mineral wool blankets cannot conform tightly to curved cylindrical walls, bolted chimes, or conical silo hoppers. The resulting annular air gaps create convective loops and thermal bridging that allow warm humid air to condense against cold steel, causing severe Corrosion Under Insulation (CUI). CAN/ULC-S705.1 2 lb closed-cell spray foam bonds monolithically to curved steel and concrete with zero seams.
Do exterior silos and water tanks require a UV protective coating over the spray foam?
Yes. Unprotected polyurethane spray foam exposed to direct sunlight will oxidize, chalk, and degrade within 12 to 24 months. Under our Turnkey Single-Contractor Accountability model, our Caliber Certified (CAN/ULC-S705.2 Licensed) Commercial Spray Foam Installers apply a high-solids silicone elastomeric, acrylic elastomeric, or polyurea topcoat immediately after foaming to block UV rays, shedding rain, snow, and hail for 20+ years.
Can you insulate winery glycol tanks, brewery fermenters, and agricultural anaerobic digesters?
Yes. We insulate stainless steel winery and brewery vessels in Niagara, Prince Edward County, and across Ontario to stop glycol chiller losses and exterior tank sweating, as well as farm and municipal anaerobic digesters requiring +38°C to +55°C process heat retention during -25°C Ontario winters.
When does a tank or silo require IFTI DC315 fire coating under the Ontario Building Code?
If a storage tank, silo cone, or water vessel is located inside an occupied building or enclosed mechanical room, Ontario Building Code Articles 3.1.4.2 and 9.10.17.10 require exposed spray polyurethane foam to be covered by a 15-minute thermal barrier. In those indoor installations, we spray IFTI DC315® intumescent coating (CAN/ULC-S124 certified) directly over the foam. Exterior open-air tanks receive UV elastomeric or polyurea coatings instead.
Will 2 lb closed-cell spray foam prevent outdoor fire-suppression and potable water tanks from freezing?
Yes. Applying 2.5" to 4.0" of CAN/ULC-S705.1 2 lb closed-cell spray foam (R-15.5 to R-25+) across the exterior shell and roof dome dramatically slows heat loss during extreme Ontario cold snaps, protecting valves, risers, and circulation systems while cutting immersion heater electricity use by 40–60%.
How long does it take to insulate and coat a commercial silo or water tank?
Most single-vessel agricultural silos or commercial water tanks (2,500 to 6,000 sq ft) are pressure-prepped, foamed, and UV-coated in 1 to 3 days. Multi-vessel tank farms and large anaerobic digesters are completed in 4 to 7 days using our mobile multi-rig commercial fleet.
How can I get a fast 2026 cost estimate for my silo or water tank project in Ontario?
You can calculate your ballpark vessel insulation and coating budget right now: Get a $250 Credit on Your Estimate — Check Your Price in 60 Seconds at /price-chat • No Site Visit Required, or request a formal engineered proposal with CAN/ULC-S705.2 specification sheets.
-$250 Estimate Credit

60-Second Instant Ballpark

Get My Price in 60s 647-333-3626
2026 Ontario Guides & Resources

Related Silo & Water Tank Spray Foam Insulation Cost & Building Code Guides

Agricultural & Silos9 min read

Barn & Agricultural Spray Foam Insulation in Ontario (2026 Cost & Condensation Guide)

How 2 lb closed-cell spray foam stops interior condensation, feed spoilage, and structural rust across Ontario grain silos, pole barns, and dairy facilities.

Read Full 2026 Guide
Commercial Pricing9 min read

Warehouse & Industrial Spray Foam Insulation Cost in Ontario (2026 Guide)

Detailed 2026 per-square-foot pricing for Ontario industrial envelopes, Ontario Building Code SB-10 compliance, and multi-rig mobilization benchmarks.

Read Full 2026 Guide
Dew-Point Science7 min read

How to Permanently Fix Metal Building & Steel Vessel Condensation in Ontario

The building science of dew-point depression on bare corrugated and cylindrical steel — and why closed-cell spray foam eliminates sweating permanently.

Read Full 2026 Guide
Elastomeric Coatings8 min read

Spray Polyurethane Foam (SPF) & Elastomeric Coating Systems in Ontario (2026)

How UV-stable silicone and elastomeric protective coatings bond over high-density spray foam to deliver 20+ year weatherproofing in Ontario.

Read Full 2026 Guide
2-IN-1 COMPLIANCE BUNDLE

COMBINE SPRAY FOAM & FIRE COATING WITH OUR COMBINED PACKAGE

Get insulation & code-compliant thermal barrier protection from a single certified contractor. Zero trade conflicts, zero scheduling delays.

Combined Package Banner

Unlock Turnkey Combined Package Pricing

Enter your details below or use our 60-second online estimator.

or call direct for immediate pricing
Call Direct: 647-333-3626

Proof of Performance

Trusted by Ontario's top builders, general contractors & homeowners.

Certified Installation & On-Time Delivery

5.0
(45+ Google Reviews)

“We had 20,000 sq ft of our logistics warehouse insulated with closed-cell spray foam. The building condensation is completely gone. Their commercial rig handled the project in just three days without interrupting our daily operations.”

Amit P.

Mississauga, ON

Facilities DirectorCommercialWarehouse Insulation

“They insulated a retail commercial building envelope for us. High-performance closed-cell foam acted as both insulation and vapor barrier. Excellent scheduling and pass on code inspection. Highly professional.”

Rajesh S.

Etobicoke, Toronto

General ContractorCommercialCommercial Spray Foam

“Used them for a multi-unit commercial project. They applied closed-cell spray foam on metal stud walls. Passed building code on the first inspection. Clean framing and no overspray. Excellent partner.”

Priya K.

Vaughan, ON

BuilderCommercialOffice Building Insulation

“Critical temperature control was required for our food distribution warehouse. They sprayed closed-cell foam on the ceiling and walls. Amazing condensation control and thermal barrier. Professional commercial crew.”

Muhammad A.

Brampton, ON

Facilities DirectorCommercialCold Storage Spray Foam

“We hired them to insulate a large steel commercial building. The closed-cell spray foam bonds perfectly to metal panels, stopping rust and drafts. Excellent WSIB-compliant, licensed crew.”

Fatima Z.

Markham, ON

Project ManagerCommercialMetal Building Insulation

“They sprayed our large farm workshop and barn walls. Condensation was ruining our equipment. Now the barn is draft-free and dry. Great commercial rates and top quality. Highly recommended.”

Vikram M.

Barrie, ON

Project ManagerCommercialAgricultural Spray Foam

“We use their commercial services for all our industrial buildings. Their rigs are top-of-the-line, and their installers are Caliber Certified (CAN/ULC-S705.2 licensed). Passed building inspections first try.”

Rohan D.

Hamilton, ON

BuilderCommercialCommercial Spray Foam

“Insulated a commercial property crawl space to stop drafts rising into offices. Polyurethane closed-cell foam was applied flawlessly. Punctual crew, WSIB insured, $5M liability coverage. Highly recommended.”

Tariq H.

Oakville, ON

Property ManagerCommercialCommercial Crawl Space

“Professional warehouse insulation project. They covered all our stock with plastic sheeting before spraying. Clean, code-compliant, and on-schedule. Our HVAC energy bills dropped by 35%.”

Yasmin R.

Pickering, ON

Facilities DirectorCommercialWarehouse Insulation

“Hired them to fix condensation in an industrial steel warehouse. Closed-cell spray foam solved the problem completely and added structural rigidity to the metal siding. Outstanding service.”

Sanjay G.

Kitchener, ON

General ContractorCommercialMetal Building Insulation

“Insulated four exterior industrial storage tanks using CCMC-approved closed-cell polyurethane foam. The thermal performance is exceptional. Safe mobilization, certified crews, and zero safety issues.”

Anjali V.

London, ON

Facilities DirectorCommercialSilo & Tank Insulation

“We needed custom shipping containers insulated for mobile office use. They sprayed 2 inches of closed-cell foam on the interior walls. No condensation, perfectly flat finish. Passed inspection easily.”

Chen W.

Toronto Port, Toronto

Project ManagerCommercialShipping Container Insulation

“Hired them to insulate a multi-story apartment building renovation. Spanning five floors, they completed the wall and floor assemblies on schedule. Professional, fully insured, and CCMC certified.”

Mei L.

Mississauga, ON

Property ManagerCommercialMulti-Unit Residential Insulation

“Excellent commercial insulation partner. We use them for all our steel-frame developments. Their high-output mobile rigs are fast, and the foam thickness is highly consistent. Excellent rates.”

Wei Z.

Vaughan, ON

General ContractorCommercialCommercial Spray Foam

“They insulated our older commercial warehouse ceiling. Closed-cell spray foam sealed all the deck joints and stopped winter drafts. We noticed a major reduction in gas bills.”

Ying H.

Brampton, ON

Facilities DirectorCommercialWarehouse Retrofit

“Hired Sprayfoam Solutions to restore our warehouse roof using a hybrid flat roof spray foam and silicone roof coating. No tear-off was required, saving us over $40,000 compared to a traditional roof replacement. The roof is 100% waterproof and reflects heat perfectly.”

Jun Y.

North York, Toronto

Facilities DirectorCommercialFlat Roof Spray Foam & Coating

“Our commercial flat roof was constantly leaking. They applied high-density spray foam and a high-solids silicone coating. It created a seamless, ponding-water resistant membrane. The project was completed on budget with zero downtime for our tenants.”

Linh N.

Mississauga, ON

Property ManagerCommercialFlat Roof Restoration

“Saved our commercial roof without a costly tear-off. They repaired the leaks and applied a reflective silicone coating. Rooftop temperatures dropped significantly, lowering our summer AC costs. Excellent service.”

Jin S.

Vaughan, ON

Facilities DirectorCommercialSilicone Roof Coating

“Outstanding roof restoration project. They applied 3lb high-density spray foam directly over our old membrane. Sealed every roof penetration perfectly. Excellent certified crew, WSIB insured.”

Min-Ji K.

Brampton, ON

Project ManagerCommercialCommercial Flat Roof

“Professional flat roof restoration. Seamless foam and silicone coating has stopped all leaks and significantly improved the building insulation. Professional, licensed team, and competitive pricing.”

Hao T.

Markham, ON

Property ManagerCommercialFlat Roof Restoration

“Great flat roof coating service. They performed a thermal scan to locate wet insulation, replaced those sections, and coated the roof with reflective silicone. 100% leak-proof and energy efficient.”

Raymond C.

Oakville, ON

Facilities DirectorCommercialSilicone Roof Coating

“Insulated and waterproofed our industrial plaza flat roof. Seamless high-density foam stops drafts and water leaks in one shot. Certified installers using CCMC-approved roofing systems.”

Kevin C.

Hamilton, ON

Project ManagerCommercialFlat Roof Spray Foam

“Professional, certified crews. They did a marvelous job applying silicone coating on our warehouse flat roof. Complete ponding water resistance and 20-year durability. Excellent work.”

Steven B.

Barrie, ON

Facilities DirectorCommercialRoof Silicone Coating

“We have used them for two flat roof restorations now. High-density spray foam followed by white reflective silicone. Tenants reported immediate comfort improvements. No leaks, highly recommended.”

Deborah D.

Oshawa, ON

Property ManagerCommercialCommercial Roof Restoration

“Restored our retail store flat roof without interrupting business. Seamless spray foam and silicone coating has survived two harsh winters with zero issues. Great warranties and WSIB insured.”

Edward M.

Kitchener, ON

Facilities DirectorCommercialFlat Roof Restoration

“Excellent roof restoration service. Thermal scan was done first to ensure no wet insulation was covered. The silicone coating application was very clean with no overspray on surrounding cars.”

Stephanie L.

London, ON

Project ManagerCommercialSilicone Roof Coating

“High-density polyurethane foam and reflective coating applied on our manufacturing facility roof. Lowered our cooling costs by 20% last summer. Excellent service, clean, and highly professional.”

Ronald K.

Vaughan, ON

Facilities DirectorCommercialFlat Roof Spray Foam

“We needed a certified 15-minute thermal barrier for a large commercial permit. Their DC315 application was flawlessly done, meeting all Building Code compliance standards on the first inspection. They provided full wet film thickness documentation.”

Rebecca P.

Scarborough, Toronto

General ContractorCommercialDC315 Fire Coating

“Highest rated fireproofing team in the GTA. They arrived within 48 hours for a CAN/ULC-S124 compliant intumescent coating project in a basement suite. The documentation provided was exactly what the inspector needed.”

Anthony G.

Mississauga, ON

General ContractorResidentialSpray Foam & DC315

“We use Sprayfoam Solutions for all our exposed spray foam projects. They apply the closed-cell foam and the DC315 fire coating on the same day—one crew, one mobilization. Saves time and framing stays clean.”

Laura J.

Vaughan, ON

BuilderResidentialDC315 Thermal Barrier

“Highly professional DC315 intumescent coating application on exposed spray foam in our mechanical rooms. The crew verified wet film thickness (WFT) continuously and left a spotless workspace. Passed inspection.”

Albert N.

Brampton, ON

Project ManagerCommercialDC315 Fire Coating

“Ontario Building Code requires a thermal barrier over exposed basement spray foam. Their DC315 application was fast and certified. They provided the CCMC evaluation report immediately for our permit file.”

Cynthia O.

Markham, ON

BuilderResidentialThermal Barrier Code Compliance

“They applied DC315 fire coating over exposed spray foam in an attic storage area. Passed building code inspection first try. Certified applicator, WSIB insured, and same-week scheduling. Excellent.”

Ryan S.

Oakville, ON

General ContractorCommercialDC315 Fire Coating

“We hire them for all our legal duplex conversions. They spray the closed-cell insulation and follow up with DC315 intumescent coating for code-compliant fire safety. Fast, neat, and highly professional.”

Kathleen D.

Hamilton, ON

BuilderResidentialSpray Foam & Fire Coating

“Excellent experience. Certified DC315 application over foam in a commercial mechanical loft. Passed inspection easily. They provided a full documentation package with CCMC evaluation reports.”

Justin F.

Barrie, ON

General ContractorCommercialDC315 Thermal Barrier

“We needed a 15-minute thermal barrier in an unfinished basement remodel. They sprayed the closed-cell foam and followed up with code-compliant DC315 fire coating. Passed building permit inspection.”

Amy W.

Kitchener, ON

BuilderResidentialDuplex Code Compliance

“Certified intumescent fire paint over spray foam. The application was clean with no overspray on steel beams or electrical runs. The crew was professional, polite, and fully WSIB insured.”

Brandon H.

London, ON

General ContractorCommercialDC315 Fire Coating

“Passed our building inspection with flying colors. The DC315 application met the 15-minute thermal barrier requirements under the Ontario building code. Highly professional service and documentation.”

Shirley A.

Oshawa, ON

General ContractorCommercialExposed Foam Fire Code

“Excellent duplex conversion project. They applied closed-cell spray foam and DC315 fire coating in the mechanical room. Outstanding coordination, clean work, and complete code compliance.”

Frank T.

East York, Toronto

BuilderResidentialDC315 Thermal Barrier

“Professional fire barrier application. They applied DC315 over exposed polyurethane spray foam. Certified thickness, verified WFT, and flawless documentation for our project engineers.”

Angela E.

Mississauga, ON

General ContractorCommercialDC315 Fire Coating

“Certified DC315 applicator. They sprayed our custom home crawl space foam and protected the space with ignition barrier coating. Neat, prompt, and completely compliant with local building codes.”

Gregory M.

Vaughan, ON

BuilderResidentialSpray Foam & Fire Paint

“They did a fantastic job with DC315 intumescent coating over foam in our commercial kitchen expansion. CCMC approved, passed municipal inspection first try. Professional and clean crews.”

Anna L.

Oakville, ON

General ContractorCommercialDC315 Thermal Barrier

“Hired them to apply cementitious fireproofing on the structural steel beams of a new commercial parking garage. Professional spray application of SFRM to code thickness. Passed third-party inspections first try with zero thickness issues.”

Fatima Z.

York, Toronto

General ContractorCommercialCementitious Fireproofing

“Excellent structural steel fireproofing service. They sprayed low-density cementitious material on the metal deck and columns. Crew worked safe at heights, fully WSIB compliant, and completed the job on schedule.”

Vikram M.

Mississauga, ON

BuilderCommercialCementitious Fireproofing

“We hire them for all our mid-rise commercial steel projects. Their crews apply cementitious fire resistive material (SFRM) to exact building code thickness. Prompt service, great prices, and fully insured.”

Rohan D.

Vaughan, ON

Project ManagerCommercialStructural Steel Fireproofing

“Passed our building inspection. They applied cementitious fire protection on steel columns in our new industrial building. Professional prep, excellent density control, and spotless cleanup. Great contractor.”

Tariq H.

Brampton, ON

BuilderCommercialCementitious Fireproofing

“Professional SFRM fireproofing contractor. They sprayed structural steel beams to meet 2-hour rating requirements. They provided complete technical documents and W/D ratio thickness charts for local inspectors.”

Yasmin R.

Markham, ON

General ContractorCommercialCommercial Fireproofing

“Sprayed cementitious fireproofing on steel deck and joists for our school project. Outstanding team, certified fireproofing crews, WSIB insured. They completed the work on schedule, passing inspection easily.”

Sanjay G.

Oakville, ON

BuilderCommercialStructural Steel Fireproofing

“Reliable commercial fireproofing contractor. Applied cementitious spray on structural steel beams in our new retail development. Excellent price, fast application, and zero scheduling delays.”

Anjali V.

Hamilton, ON

Project ManagerCommercialCementitious Fireproofing

“We needed medium-density cementitious fireproofing for a semi-exposed commercial parking deck. They applied the Monokote SFRM flawlessly. Passed thickness inspection first try. Outstanding crew.”

Chen W.

Barrie, ON

General ContractorCommercialParking Garage Fireproofing

“Great experience. They sprayed structural steel columns on our new commercial warehouse. The application thickness met all building code requirements. Highly professional, certified crews.”

Mei L.

Whitby, ON

BuilderCommercialCommercial Fireproofing

“Hired them to fireproof steel framing in a commercial office. They applied cementitious spray to exact specification and cleaned up every scrap of overspray. Passed inspections without issues.”

Wei Z.

Kitchener, ON

Project ManagerCommercialStructural Steel Fireproofing

“Highly professional SFRM application. They worked around our other trades to fireproof structural columns on schedule. Clean work, CCMC approved materials, WSIB insured. Will use again.”

Ying H.

London, ON

General ContractorCommercialCementitious Fireproofing

“We hired Sprayfoam Solutions to apply thin-film intumescent fire coating on architecturally exposed structural steel (AESS) beams in our new corporate headquarters lobby. The finish is incredibly smooth and looks like paint, yet provides a certified 2-hour fire rating. Passed third-party DFT testing first try.”

Jun Y.

Downtown Toronto, Toronto

General ContractorCommercialIntumescent Steel Fireproofing

“Outstanding thin-film intumescent application on exposed steel columns in a retail space. The architects wanted the steel visible, so cementitious was out. They did a marvelous job, primer and topcoat were perfectly applied.”

Linh N.

Mississauga, ON

BuilderCommercialIntumescent Fire Protection

“They applied intumescent coating on exposed timber beams in a heritage building restoration. Achieved code fire rating while preserving the historical wooden structure. Excellent workmanship, clean and professional.”

Jin S.

The Annex, Toronto

General ContractorCommercialAESS Fireproofing

“Excellent intumescent application for exposed structural steel in a commercial office. They verified dry film thickness (DFT) meticulously and provided complete documentation for the fire marshal. Passed inspection.”

Min-Ji K.

Vaughan, ON

Project ManagerCommercialIntumescent Steel Coating

“Hired them to apply intumescent fireproofing on steel structural columns in a new restaurant. Smooth finish, CAN/ULC-S101 compliant, and completed on schedule. Great contractor and pricing.”

Hao T.

Brampton, ON

BuilderCommercialThin-Film Intumescent

“Professional intumescent coating application on steel framing. Architects specified exposed steel look. This thin-film coating expanded perfectly in fire testing. Certified crews, WSIB insured, $5M liability.”

Raymond C.

Markham, ON

General ContractorCommercialAESS Fire Protection

“We needed a 1-hour fire rating on exposed structural steel columns. They applied thin-film water-based intumescent. Excellent smooth paint-like finish, on schedule, and zero issues with building code inspector.”

Kevin C.

Oakville, ON

Project ManagerCommercialIntumescent Fireproofing

“Great thin-film intumescent coating service. They worked weekends to prevent disrupting our ongoing commercial tenant operations. The finish looks spectacular and meets building code. Highly recommended.”

Raymond K.

Hamilton, ON

BuilderCommercialIntumescent Steel Coating

“They applied intumescent fire paint on exposed structural steel columns in a new school library. Smooth AESS finish, WSIB insured, same-week scheduling. Excellent coordination with our drywallers.”

Brenda C.

Barrie, ON

General ContractorCommercialIntumescent Fire Protection

“Professional thin-film intumescent application on exposed steel rafters. Excellent dry film thickness (DFT) reports provided. Passed building inspections first try. Best fireproofing contractor.”

Samuel G.

Pickering, ON

BuilderCommercialAESS Fireproofing

“They sprayed thin-film intumescent over steel framing in our commercial renovation. Cured quickly and was ready for topcoat in 24 hours. Certified crews, outstanding workmanship and pricing.”

Pamela R.

Kitchener, ON

General ContractorCommercialIntumescent Steel Coating

“Insulated and fireproofed historical timber beams in a heritage loft conversion. Thin-film intumescent kept the wood visible while meeting the 1-hour fire safety code. Outstanding workmanship.”

Benjamin B.

London, ON

BuilderCommercialHeritage Fire Protection

“We had 20,000 sq ft of our logistics warehouse insulated with closed-cell spray foam. The building condensation is completely gone. Their commercial rig handled the project in just three days without interrupting our daily operations.”

Amit P.

Mississauga, ON

Facilities DirectorCommercialWarehouse Insulation

“They insulated a retail commercial building envelope for us. High-performance closed-cell foam acted as both insulation and vapor barrier. Excellent scheduling and pass on code inspection. Highly professional.”

Rajesh S.

Etobicoke, Toronto

General ContractorCommercialCommercial Spray Foam

“Used them for a multi-unit commercial project. They applied closed-cell spray foam on metal stud walls. Passed building code on the first inspection. Clean framing and no overspray. Excellent partner.”

Priya K.

Vaughan, ON

BuilderCommercialOffice Building Insulation

“Critical temperature control was required for our food distribution warehouse. They sprayed closed-cell foam on the ceiling and walls. Amazing condensation control and thermal barrier. Professional commercial crew.”

Muhammad A.

Brampton, ON

Facilities DirectorCommercialCold Storage Spray Foam

“We hired them to insulate a large steel commercial building. The closed-cell spray foam bonds perfectly to metal panels, stopping rust and drafts. Excellent WSIB-compliant, licensed crew.”

Fatima Z.

Markham, ON

Project ManagerCommercialMetal Building Insulation

“They sprayed our large farm workshop and barn walls. Condensation was ruining our equipment. Now the barn is draft-free and dry. Great commercial rates and top quality. Highly recommended.”

Vikram M.

Barrie, ON

Project ManagerCommercialAgricultural Spray Foam

“We use their commercial services for all our industrial buildings. Their rigs are top-of-the-line, and their installers are Caliber Certified (CAN/ULC-S705.2 licensed). Passed building inspections first try.”

Rohan D.

Hamilton, ON

BuilderCommercialCommercial Spray Foam

“Insulated a commercial property crawl space to stop drafts rising into offices. Polyurethane closed-cell foam was applied flawlessly. Punctual crew, WSIB insured, $5M liability coverage. Highly recommended.”

Tariq H.

Oakville, ON

Property ManagerCommercialCommercial Crawl Space

“Professional warehouse insulation project. They covered all our stock with plastic sheeting before spraying. Clean, code-compliant, and on-schedule. Our HVAC energy bills dropped by 35%.”

Yasmin R.

Pickering, ON

Facilities DirectorCommercialWarehouse Insulation

“Hired them to fix condensation in an industrial steel warehouse. Closed-cell spray foam solved the problem completely and added structural rigidity to the metal siding. Outstanding service.”

Sanjay G.

Kitchener, ON

General ContractorCommercialMetal Building Insulation

“Insulated four exterior industrial storage tanks using CCMC-approved closed-cell polyurethane foam. The thermal performance is exceptional. Safe mobilization, certified crews, and zero safety issues.”

Anjali V.

London, ON

Facilities DirectorCommercialSilo & Tank Insulation

“We needed custom shipping containers insulated for mobile office use. They sprayed 2 inches of closed-cell foam on the interior walls. No condensation, perfectly flat finish. Passed inspection easily.”

Chen W.

Toronto Port, Toronto

Project ManagerCommercialShipping Container Insulation

“Hired them to insulate a multi-story apartment building renovation. Spanning five floors, they completed the wall and floor assemblies on schedule. Professional, fully insured, and CCMC certified.”

Mei L.

Mississauga, ON

Property ManagerCommercialMulti-Unit Residential Insulation

“Excellent commercial insulation partner. We use them for all our steel-frame developments. Their high-output mobile rigs are fast, and the foam thickness is highly consistent. Excellent rates.”

Wei Z.

Vaughan, ON

General ContractorCommercialCommercial Spray Foam

“They insulated our older commercial warehouse ceiling. Closed-cell spray foam sealed all the deck joints and stopped winter drafts. We noticed a major reduction in gas bills.”

Ying H.

Brampton, ON

Facilities DirectorCommercialWarehouse Retrofit

“Hired Sprayfoam Solutions to restore our warehouse roof using a hybrid flat roof spray foam and silicone roof coating. No tear-off was required, saving us over $40,000 compared to a traditional roof replacement. The roof is 100% waterproof and reflects heat perfectly.”

Jun Y.

North York, Toronto

Facilities DirectorCommercialFlat Roof Spray Foam & Coating

“Our commercial flat roof was constantly leaking. They applied high-density spray foam and a high-solids silicone coating. It created a seamless, ponding-water resistant membrane. The project was completed on budget with zero downtime for our tenants.”

Linh N.

Mississauga, ON

Property ManagerCommercialFlat Roof Restoration

“Saved our commercial roof without a costly tear-off. They repaired the leaks and applied a reflective silicone coating. Rooftop temperatures dropped significantly, lowering our summer AC costs. Excellent service.”

Jin S.

Vaughan, ON

Facilities DirectorCommercialSilicone Roof Coating

“Outstanding roof restoration project. They applied 3lb high-density spray foam directly over our old membrane. Sealed every roof penetration perfectly. Excellent certified crew, WSIB insured.”

Min-Ji K.

Brampton, ON

Project ManagerCommercialCommercial Flat Roof

“Professional flat roof restoration. Seamless foam and silicone coating has stopped all leaks and significantly improved the building insulation. Professional, licensed team, and competitive pricing.”

Hao T.

Markham, ON

Property ManagerCommercialFlat Roof Restoration

“Great flat roof coating service. They performed a thermal scan to locate wet insulation, replaced those sections, and coated the roof with reflective silicone. 100% leak-proof and energy efficient.”

Raymond C.

Oakville, ON

Facilities DirectorCommercialSilicone Roof Coating

“Insulated and waterproofed our industrial plaza flat roof. Seamless high-density foam stops drafts and water leaks in one shot. Certified installers using CCMC-approved roofing systems.”

Kevin C.

Hamilton, ON

Project ManagerCommercialFlat Roof Spray Foam

“Professional, certified crews. They did a marvelous job applying silicone coating on our warehouse flat roof. Complete ponding water resistance and 20-year durability. Excellent work.”

Steven B.

Barrie, ON

Facilities DirectorCommercialRoof Silicone Coating

“We have used them for two flat roof restorations now. High-density spray foam followed by white reflective silicone. Tenants reported immediate comfort improvements. No leaks, highly recommended.”

Deborah D.

Oshawa, ON

Property ManagerCommercialCommercial Roof Restoration

“Restored our retail store flat roof without interrupting business. Seamless spray foam and silicone coating has survived two harsh winters with zero issues. Great warranties and WSIB insured.”

Edward M.

Kitchener, ON

Facilities DirectorCommercialFlat Roof Restoration

“Excellent roof restoration service. Thermal scan was done first to ensure no wet insulation was covered. The silicone coating application was very clean with no overspray on surrounding cars.”

Stephanie L.

London, ON

Project ManagerCommercialSilicone Roof Coating

“High-density polyurethane foam and reflective coating applied on our manufacturing facility roof. Lowered our cooling costs by 20% last summer. Excellent service, clean, and highly professional.”

Ronald K.

Vaughan, ON

Facilities DirectorCommercialFlat Roof Spray Foam

“We needed a certified 15-minute thermal barrier for a large commercial permit. Their DC315 application was flawlessly done, meeting all Building Code compliance standards on the first inspection. They provided full wet film thickness documentation.”

Rebecca P.

Scarborough, Toronto

General ContractorCommercialDC315 Fire Coating

“Highest rated fireproofing team in the GTA. They arrived within 48 hours for a CAN/ULC-S124 compliant intumescent coating project in a basement suite. The documentation provided was exactly what the inspector needed.”

Anthony G.

Mississauga, ON

General ContractorResidentialSpray Foam & DC315

“We use Sprayfoam Solutions for all our exposed spray foam projects. They apply the closed-cell foam and the DC315 fire coating on the same day—one crew, one mobilization. Saves time and framing stays clean.”

Laura J.

Vaughan, ON

BuilderResidentialDC315 Thermal Barrier

“Highly professional DC315 intumescent coating application on exposed spray foam in our mechanical rooms. The crew verified wet film thickness (WFT) continuously and left a spotless workspace. Passed inspection.”

Albert N.

Brampton, ON

Project ManagerCommercialDC315 Fire Coating

“Ontario Building Code requires a thermal barrier over exposed basement spray foam. Their DC315 application was fast and certified. They provided the CCMC evaluation report immediately for our permit file.”

Cynthia O.

Markham, ON

BuilderResidentialThermal Barrier Code Compliance

“They applied DC315 fire coating over exposed spray foam in an attic storage area. Passed building code inspection first try. Certified applicator, WSIB insured, and same-week scheduling. Excellent.”

Ryan S.

Oakville, ON

General ContractorCommercialDC315 Fire Coating

“We hire them for all our legal duplex conversions. They spray the closed-cell insulation and follow up with DC315 intumescent coating for code-compliant fire safety. Fast, neat, and highly professional.”

Kathleen D.

Hamilton, ON

BuilderResidentialSpray Foam & Fire Coating

“Excellent experience. Certified DC315 application over foam in a commercial mechanical loft. Passed inspection easily. They provided a full documentation package with CCMC evaluation reports.”

Justin F.

Barrie, ON

General ContractorCommercialDC315 Thermal Barrier

“We needed a 15-minute thermal barrier in an unfinished basement remodel. They sprayed the closed-cell foam and followed up with code-compliant DC315 fire coating. Passed building permit inspection.”

Amy W.

Kitchener, ON

BuilderResidentialDuplex Code Compliance

“Certified intumescent fire paint over spray foam. The application was clean with no overspray on steel beams or electrical runs. The crew was professional, polite, and fully WSIB insured.”

Brandon H.

London, ON

General ContractorCommercialDC315 Fire Coating

“Passed our building inspection with flying colors. The DC315 application met the 15-minute thermal barrier requirements under the Ontario building code. Highly professional service and documentation.”

Shirley A.

Oshawa, ON

General ContractorCommercialExposed Foam Fire Code

“Excellent duplex conversion project. They applied closed-cell spray foam and DC315 fire coating in the mechanical room. Outstanding coordination, clean work, and complete code compliance.”

Frank T.

East York, Toronto

BuilderResidentialDC315 Thermal Barrier

“Professional fire barrier application. They applied DC315 over exposed polyurethane spray foam. Certified thickness, verified WFT, and flawless documentation for our project engineers.”

Angela E.

Mississauga, ON

General ContractorCommercialDC315 Fire Coating

“Certified DC315 applicator. They sprayed our custom home crawl space foam and protected the space with ignition barrier coating. Neat, prompt, and completely compliant with local building codes.”

Gregory M.

Vaughan, ON

BuilderResidentialSpray Foam & Fire Paint

“They did a fantastic job with DC315 intumescent coating over foam in our commercial kitchen expansion. CCMC approved, passed municipal inspection first try. Professional and clean crews.”

Anna L.

Oakville, ON

General ContractorCommercialDC315 Thermal Barrier

“Hired them to apply cementitious fireproofing on the structural steel beams of a new commercial parking garage. Professional spray application of SFRM to code thickness. Passed third-party inspections first try with zero thickness issues.”

Fatima Z.

York, Toronto

General ContractorCommercialCementitious Fireproofing

“Excellent structural steel fireproofing service. They sprayed low-density cementitious material on the metal deck and columns. Crew worked safe at heights, fully WSIB compliant, and completed the job on schedule.”

Vikram M.

Mississauga, ON

BuilderCommercialCementitious Fireproofing

“We hire them for all our mid-rise commercial steel projects. Their crews apply cementitious fire resistive material (SFRM) to exact building code thickness. Prompt service, great prices, and fully insured.”

Rohan D.

Vaughan, ON

Project ManagerCommercialStructural Steel Fireproofing

“Passed our building inspection. They applied cementitious fire protection on steel columns in our new industrial building. Professional prep, excellent density control, and spotless cleanup. Great contractor.”

Tariq H.

Brampton, ON

BuilderCommercialCementitious Fireproofing

“Professional SFRM fireproofing contractor. They sprayed structural steel beams to meet 2-hour rating requirements. They provided complete technical documents and W/D ratio thickness charts for local inspectors.”

Yasmin R.

Markham, ON

General ContractorCommercialCommercial Fireproofing

“Sprayed cementitious fireproofing on steel deck and joists for our school project. Outstanding team, certified fireproofing crews, WSIB insured. They completed the work on schedule, passing inspection easily.”

Sanjay G.

Oakville, ON

BuilderCommercialStructural Steel Fireproofing

“Reliable commercial fireproofing contractor. Applied cementitious spray on structural steel beams in our new retail development. Excellent price, fast application, and zero scheduling delays.”

Anjali V.

Hamilton, ON

Project ManagerCommercialCementitious Fireproofing

“We needed medium-density cementitious fireproofing for a semi-exposed commercial parking deck. They applied the Monokote SFRM flawlessly. Passed thickness inspection first try. Outstanding crew.”

Chen W.

Barrie, ON

General ContractorCommercialParking Garage Fireproofing

“Great experience. They sprayed structural steel columns on our new commercial warehouse. The application thickness met all building code requirements. Highly professional, certified crews.”

Mei L.

Whitby, ON

BuilderCommercialCommercial Fireproofing

“Hired them to fireproof steel framing in a commercial office. They applied cementitious spray to exact specification and cleaned up every scrap of overspray. Passed inspections without issues.”

Wei Z.

Kitchener, ON

Project ManagerCommercialStructural Steel Fireproofing

“Highly professional SFRM application. They worked around our other trades to fireproof structural columns on schedule. Clean work, CCMC approved materials, WSIB insured. Will use again.”

Ying H.

London, ON

General ContractorCommercialCementitious Fireproofing

“We hired Sprayfoam Solutions to apply thin-film intumescent fire coating on architecturally exposed structural steel (AESS) beams in our new corporate headquarters lobby. The finish is incredibly smooth and looks like paint, yet provides a certified 2-hour fire rating. Passed third-party DFT testing first try.”

Jun Y.

Downtown Toronto, Toronto

General ContractorCommercialIntumescent Steel Fireproofing

“Outstanding thin-film intumescent application on exposed steel columns in a retail space. The architects wanted the steel visible, so cementitious was out. They did a marvelous job, primer and topcoat were perfectly applied.”

Linh N.

Mississauga, ON

BuilderCommercialIntumescent Fire Protection

“They applied intumescent coating on exposed timber beams in a heritage building restoration. Achieved code fire rating while preserving the historical wooden structure. Excellent workmanship, clean and professional.”

Jin S.

The Annex, Toronto

General ContractorCommercialAESS Fireproofing

“Excellent intumescent application for exposed structural steel in a commercial office. They verified dry film thickness (DFT) meticulously and provided complete documentation for the fire marshal. Passed inspection.”

Min-Ji K.

Vaughan, ON

Project ManagerCommercialIntumescent Steel Coating

“Hired them to apply intumescent fireproofing on steel structural columns in a new restaurant. Smooth finish, CAN/ULC-S101 compliant, and completed on schedule. Great contractor and pricing.”

Hao T.

Brampton, ON

BuilderCommercialThin-Film Intumescent

“Professional intumescent coating application on steel framing. Architects specified exposed steel look. This thin-film coating expanded perfectly in fire testing. Certified crews, WSIB insured, $5M liability.”

Raymond C.

Markham, ON

General ContractorCommercialAESS Fire Protection

“We needed a 1-hour fire rating on exposed structural steel columns. They applied thin-film water-based intumescent. Excellent smooth paint-like finish, on schedule, and zero issues with building code inspector.”

Kevin C.

Oakville, ON

Project ManagerCommercialIntumescent Fireproofing

“Great thin-film intumescent coating service. They worked weekends to prevent disrupting our ongoing commercial tenant operations. The finish looks spectacular and meets building code. Highly recommended.”

Raymond K.

Hamilton, ON

BuilderCommercialIntumescent Steel Coating

“They applied intumescent fire paint on exposed structural steel columns in a new school library. Smooth AESS finish, WSIB insured, same-week scheduling. Excellent coordination with our drywallers.”

Brenda C.

Barrie, ON

General ContractorCommercialIntumescent Fire Protection

“Professional thin-film intumescent application on exposed steel rafters. Excellent dry film thickness (DFT) reports provided. Passed building inspections first try. Best fireproofing contractor.”

Samuel G.

Pickering, ON

BuilderCommercialAESS Fireproofing

“They sprayed thin-film intumescent over steel framing in our commercial renovation. Cured quickly and was ready for topcoat in 24 hours. Certified crews, outstanding workmanship and pricing.”

Pamela R.

Kitchener, ON

General ContractorCommercialIntumescent Steel Coating

“Insulated and fireproofed historical timber beams in a heritage loft conversion. Thin-film intumescent kept the wood visible while meeting the 1-hour fire safety code. Outstanding workmanship.”

Benjamin B.

London, ON

BuilderCommercialHeritage Fire Protection

THE SPRAY FOAM EXPERTS

That Actually Lower Your Energy Bills
★★★★★5.0 Google Rating•55+ Verified Reviews•Serving Across Ontario
STEP 1: 60-SECOND PRICE CHECK
LOCK IN DIRECT CONTRACTOR PRICING

Fast Response & Quotes · No Commitment!

Tap to Select Your Project:
or call directly: 647-333-3626
VERIFIED, CERTIFIED & LISTED ON
Google5.0 ★ Verified
HomeStarsVerified Pro
Houzz ProListed Contractor
TrustedProsCanadian Directory
Caliber CertifiedCAN/ULC-S705.2
WSIB & CCMCOntario Cleared

Proudly Serving Toronto, GTA & All of Ontario

Direct contractor pricing · Caliber Certified (CAN/ULC-S705.2) Installers · $0 Travel Fee Across Ontario

Sprayfoam Solutions service coverage map across Toronto, GTA and Ontario
50+ Cities & Municipalities

With regional mobile crews stationed right near you, we charge $0 travel fees and stand as the best, most trusted contractor to serve your home or commercial building anywhere in Ontario.

WSIB Insured
6,500+ Projects Completed
Get My Price in 60s →

Get Your Free Quote

Takes 10 seconds — we'll call you back.

Free Estimate No Obligation WSIB Cleared Licensed Caliber Certified
Call 647-333-3626 (7AM–9PM)
SERVING ALL ONTARIO:Ajax • Aurora • Barrie • Belleville • Bracebridge • Brampton • Brant • Brantford • Brock • Brockville • Burlington • Caledon • Cambridge • Chatham-Kent • Clarington • Collingwood • Cornwall • East Gwillimbury • Etobicoke • Fort Erie • Gravenhurst • Grimsby • Guelph • Halton Hills • Hamilton • Huntsville • Innisfil • Kawartha Lakes • King • Kingston • Kitchener • Lincoln • London • Markham • Milton • Mississauga • Muskoka • Newmarket • Niagara Falls • North York • Oakville • Orillia • Oshawa • Ottawa • Parry Sound • Pelham • Peterborough • Pickering • Port Colborne • Richmond Hill • Sarnia • Scarborough • Scugog • St. Catharines • St. Thomas • Stratford • Thorold • Toronto • Uxbridge • Vaughan • Wainfleet • Waterloo • Welland • West Lincoln • Whitby • Whitchurch-Stouffville • Windsor • Woodstock•Ajax • Aurora • Barrie • Belleville • Bracebridge • Brampton • Brant • Brantford • Brock • Brockville • Burlington • Caledon • Cambridge • Chatham-Kent • Clarington • Collingwood • Cornwall • East Gwillimbury • Etobicoke • Fort Erie • Gravenhurst • Grimsby • Guelph • Halton Hills • Hamilton • Huntsville • Innisfil • Kawartha Lakes • King • Kingston • Kitchener • Lincoln • London • Markham • Milton • Mississauga • Muskoka • Newmarket • Niagara Falls • North York • Oakville • Orillia • Oshawa • Ottawa • Parry Sound • Pelham • Peterborough • Pickering • Port Colborne • Richmond Hill • Sarnia • Scarborough • Scugog • St. Catharines • St. Thomas • Stratford • Thorold • Toronto • Uxbridge • Vaughan • Wainfleet • Waterloo • Welland • West Lincoln • Whitby • Whitchurch-Stouffville • Windsor • Woodstock

About Sprayfoam Solutions Toronto Inc

6,500+ projects completed since 2008. The Greater Toronto Area's trusted spray foam insulation & fireproofing contractor for commercial builders, general contractors, and homeowners.

647-333-3626Request a Quote
50 Howden Rd, Scarborough, ON M1R 3E4
100% Canadian Owned & OperatedLicensed • Up to $10M Insured • WSIB Clearance

Our Services

  • ›Spray Foam (Residential)
  • ›Spray Foam (Commercial)
  • ›Interior Sound Dampening
  • ›Fire Coating DC315
  • ›Cementitious Fireproofing
  • ›Intumescent Coating

Expert Guides

  • What is Spray Foam Insulation?
  • How Much Does Spray Foam Cost?
  • Our Chemicals & Technical Data
  • Customer Reviews (5.0 ★)
  • View Our Projects
  • Book Free On-Site Inspection

Areas We Serve

  • •Toronto & Central GTA
  • •Mississauga & Peel
  • •Oakville & Halton
  • •Vaughan & York Region
  • •Barrie & Simcoe County
  • •Muskoka & Cottage Country
  • •Waterloo & Tri-Cities
  • •Oshawa & Durham Region
  • + View All 50+ Cities
All project estimates, pricing illustrations, R-value metrics, and building code references on this website are for general informational purposes only and do not constitute a certified estimate or binding offer to contract. Formal written contracts provided by Sprayfoam Solutions Toronto Inc. following an on-site inspection strictly supersede all online representations. Subject to our Terms of Service and Privacy Policy.
AboutView Our WorkCustomer Reviews 5.0 ★CertificationsServicesAreas We ServeBlogContact UsTerms of ServicePrivacy Policy
© 2026 Spray Foam Solutions Toronto Inc. All Rights Reserved.