Sprayfoam SolutionsWe Serve GTA & Across Ontario!
Home

Residential

Major Projects
  • Custom New Homes
  • Additions & Renovations
  • Muskoka Cottages & Homes
  • Exterior Walls
  • Interior Ceiling Sound Dampening
Targeted Areas
  • Basements
  • Attics & Roof Decks
  • Crawl Spaces
  • Rim Joist Headers
  • Garages & Floors Over Garage
  • Cathedral Ceilings
  • Cantilevers & Overhangs
  • Under-Slab & Radiant Floors
  • Cold Rooms
  • RVs & Vans
  • Swimming Pools

Commercial

Buildings & Facilities
  • Commercial SPF & Fire Coating
  • Warehouse & Industrial
  • Metal Buildings
  • Barns & Agricultural
  • Multi-Unit Buildings
  • Flat Roof Systems
Specialty
  • Shipping Containers
  • Silos & Water Tanks

Code & Expert Guides

  • What is Spray Foam?
  • Cost of Spray Foam
  • Our Sprayfoam Chemicals
  • Certifications & Standards
  • Spray Foam Knowledge Base
Ontario Code & ULC Guides
  • Ontario R-Value & Code Guide
  • CAN/ULC-S705.2 Code Rules
  • Open-Cell vs. Closed-Cell

Thermal Barriers (Foam)

Core Systems
  • DC315 Intumescent Coating
  • Sprayfoam & Fire Coating (2-in-1)
Where Code Requires It
  • Mechanical & Furnace Rooms
  • Exposed Basements & Crawls
  • Attached Garage Ceilings
  • Warehouse Exposed Foam Decks
  • Unvented Attics & Roof Decks
  • Rim Joists & Floor Headers

Structural Fireproofing

Fireproofing Systems
  • Cementitious Fireproofing (SFRM)
  • Intumescent Fire Coating (Thin-Film)
Structural Assemblies
  • Structural Beams & Columns
  • Metal Floor & Roof Decks
  • Commercial Parkades & Garages
  • Architectural Exposed Steel (AESS)
  • Request Fire Spec & Quote

Code & Expert Guides

  • What is DC315 Fire Coating?
  • Cost of DC315 Fire Coating
  • Our Fire Coating Chemicals
  • Certifications & Standards
  • Fire Coating Knowledge Base
Ontario Code & ULC Guides
  • Ontario 15-Min Thermal Barrier
  • ULC 1–4 Hr Steel Ratings
  • DC315 vs. Type X Drywall
Locations
Ontario Service RegionsView All 50+ Cities →
Toronto & Central
Toronto · Etobicoke · North York · Scarborough
Peel Region
Mississauga · Brampton · Caledon
York Region
Vaughan · Markham · Richmond Hill · Newmarket
Halton Region
Oakville · Burlington · Milton · Halton Hills
Durham Region
Pickering · Whitby · Oshawa · Ajax · Clarington
Hamilton & Niagara
Hamilton · St. Catharines · Niagara Falls · Brantford
Kitchener / Waterloo / Guelph
Kitchener · Waterloo · Cambridge · Guelph
Barrie & Simcoe County
Barrie · Orillia · Innisfil · Collingwood
Muskoka & Cottage Country
Muskoka · Huntsville · Gravenhurst · Bracebridge
Windsor & Southwestern ON
Windsor · London · Sarnia · Chatham-Kent
Our WorkReviews
Contact UsGet My Pricing
Serving GTA & Beyond
Sprayfoam SolutionsWe Serve GTA & Across Ontario!
Home
Spray Foam Services
Overview & Guides
What is Spray Foam?Cost of Spray FoamOpen-Cell vs. Closed-CellOntario R-Value & Code Guide
Project Applications
Custom New HomesAdditions & RenovationsMuskoka Cottages & HomesExterior WallsInterior Ceiling Sound DampeningBasementsAttics & Roof DecksCrawl SpacesRim Joist HeadersGarages & Floors Over GarageCathedral CeilingsCantilevers & OverhangsUnder-Slab & Radiant FloorsCold RoomsRVs & VansSwimming Pools
Overview & Guides
Commercial SPF & Fire Coating OverviewCAN/ULC-S705.2 Code RulesCost of Spray Foam
Project Applications
Warehouse & IndustrialMetal BuildingsBarns & AgriculturalMulti-Unit BuildingsFlat Roof SystemsShipping ContainersSilos & Water Tanks
Overview & Guides
Our Sprayfoam ChemicalsCertifications & StandardsSpray Foam Knowledge Base
Fire Coatings
Overview & Guides
DC315 Fire Coating OverviewSprayfoam & DC315 Package (2-in-1)What is DC315 Fire Coating?Cost of DC315 Fire CoatingDC315 vs. Type X DrywallOntario 15-Min Thermal Barrier
Project Applications
Mechanical & Furnace RoomsExposed Basements & CrawlsAttached Garage CeilingsWarehouse Exposed Foam DecksUnvented Attics & Roof DecksRim Joists & Floor Headers
Overview & Guides
Intumescent Fire Coating OverviewULC 1–4 Hr Steel Fire Ratings
Project Applications
Structural Beams & ColumnsArchitectural Exposed Steel (AESS)Request Fire Spec & Quote
Overview & Guides
Cementitious Fireproofing OverviewULC 1–4 Hr Steel Fire Ratings
Project Applications
Metal Floor & Roof DecksCommercial Parkades & GaragesRequest Fire Spec & Quote
Overview & Guides
Our Fire Coating ChemicalsCertifications & StandardsFire Coating Knowledge Base
Ontario Service RegionsView All 50+ Cities →
Toronto & Central
Toronto · Etobicoke · North York · Scarborough
Peel Region
Mississauga · Brampton · Caledon
York Region
Vaughan · Markham · Richmond Hill · Newmarket
Halton Region
Oakville · Burlington · Milton · Halton Hills
Durham Region
Pickering · Whitby · Oshawa · Ajax · Clarington
Hamilton & Niagara
Hamilton · St. Catharines · Niagara Falls · Brantford
Kitchener / Waterloo / Guelph
Kitchener · Waterloo · Cambridge · Guelph
Barrie & Simcoe County
Barrie · Orillia · Innisfil · Collingwood
Muskoka & Cottage Country
Muskoka · Huntsville · Gravenhurst · Bracebridge
Windsor & Southwestern ON
Windsor · London · Sarnia · Chatham-Kent
Our WorkReviewsContact Us
More Info & Resources
› About Us› Certifications› All Services› Blog & Guides
We Serve GTA & Across Ontario!
Get My Pricing 647-333-3626
DIVISION 07 81 00 • CAN/ULC-S101 STRUCTURAL STEEL FIREPROOFING CONTRACTOR
5.0 Google Rating·45+ Verified Reviews

Cementitious Fireproofing (SFRM) Contractor in Toronto & Ontario
1 to 4 Hour Structural Steel Fire Protection

2026 Quick Summary & Ballpark Cost

2026 Ontario SFRM Coating & Structural Steel Cost Summary: Commercial cementitious fireproofing for steel (CSI Division 07 81 00 SFRM coating) installed by Sprayfoam Solutions Toronto Inc. across Toronto, Mississauga, Brampton, Vaughan, Markham, Oakville, and across Ontario costs $2.50–$4.95/sq ft for standard-density concealed structural steel (15–19 lb/ft³ Monokote® MK-6® / Cafco® 300 & other ULC-listed structural fireproofing systems) and $3.85–$6.75/sq ft for medium/high-density Portland cement SFRM fire protection (22–40+ lb/ft³ Monokote® Z-106 / Cafco® 400 / Pyrocrete®) on fluted steel decking, beams, parkades, and commercial towers. Backed by our Caliber Certified (CAN/ULC-S705.2 Licensed) Installers and fireproofing crews, tested to CAN/ULC-S101 (1 to 4 Hour Ratings) with full ASTM E605 & E736 field QA logs. Call (647) 333-3626 or get a $250 Credit on Your Estimate — Check Your Price in 60 Seconds at spfsolutions.ca/price-chat (No Site Visit Required).

60-Sec Online Estimate
Calculate Estimate 647-333-3626
CAN/ULC-S101 & S124 CertifiedWSIB & Up to $10M Liability InsuredSigned QA Certificates
Cementitious Fireproofing (SFRM) Toronto project 1Cementitious Fireproofing (SFRM) Toronto project 2Cementitious Fireproofing (SFRM) Toronto project 3Cementitious Fireproofing (SFRM) Toronto project 4Cementitious Fireproofing (SFRM) Toronto project 5
CAN/ULC-S101 Cementitious Fireproofing (SFRM) — Structural Steel & Metal Deck

Get Your Free Quote

Takes 10 seconds — we'll call you back.

Free Estimate No Obligation WSIB Cleared Licensed Caliber Certified
Call 647-333-3626 (7AM–9PM)
Have Blueprints or Steel Schedules? Email drawings to info@spfsolutions.ca for 24-hour fireproofing takeoffs & pricing.

Our Canadian Suppliers, Partners, Clients & Credentials

Canadian Owned logo
Mattamy Homes logo
WSIB Ontario logo
Treasure Hill logo
Huntsman logo
Minto logo
Carlisle logo
Daniels logo
Soprema logo
Geranium logo
Common Issues

What Happens When Structural Steel Fireproofing Is Missing, Damaged, or Out of Spec

Unprotected structural steel loses 50% of its load-bearing yield strength at 538°C (1,000°F) — a temperature reached within minutes in a commercial fire
Failed municipal occupancy or third-party engineering inspections delaying tenant turnover and costing general contractors thousands per day
Low-density gypsum fireproofing mistakenly applied in humid underground parkades absorbing road-salt moisture and delaminating from steel decks
Unverified W/D section-factor calculations resulting in insufficient pin thickness during ASTM E605 third-party testing
Missing ULC Design Series (D700, D900, Z600, X700) submittal logs stalling municipal building permit close-out
Mechanical trade retrofits (HVAC ducts, sprinkler hangers, core drills) stripping existing SFRM and leaving structural steel in code violation
The Solution

Why Ontario General Contractors, Architects & Engineers Specify Our Cementitious Fireproofing

1 to 4 Hour CAN/ULC-S101 Fire-Resistance Ratings

Every structural member is matched to its exact ULC Design Assembly (Series D700/D900 floor decks, P700/P900 roof decks, Z600/X700 columns & beams) and W/D section factor to achieve 1, 1.5, 2, 3, or 4-hour fire endurance under the Ontario Building Code.

Standard (15 PCF), Medium (22 PCF) & High-Density (40+ PCF) Systems

We install lightweight gypsum SFRM for concealed plenums and high-bond Portland-cement SFRM (Monokote Z-106/Z-146, Cafco Fendolite MII, Pyrocrete) for underground parkades, loading docks, elevator shafts, and mechanical rooms.

ASTM E605 Thickness & ASTM E736 Bond-Strength QA Package

Every project includes calibrated pin-depth logs, cured core density verification (ASTM E605), cohesive/adhesive pull-test records (ASTM E736), batch-lot traceability, and signed closeout binders for third-party engineers.

High-Production Commercial Crews & Patch/Retrofit Dispatch

From 500 sq ft tenant mechanical room patching to 150,000+ sq ft multi-storey steel packages and parkade podium slabs, our certified fireproofing applicators keep your critical-path schedule moving.

Cementitious Fireproofing (SFRM) benefit 1
Cementitious Fireproofing (SFRM) benefit 2
Cementitious Fireproofing (SFRM) benefit 3
Cementitious Fireproofing (SFRM) benefit 4

CEMENTITIOUS FIREPROOFING EXPERTS

1 to 4 Hour CAN/ULC-S101 Structural Steel Protection
★★★★★5.0 Google Rating•55+ Verified Reviews•Serving Across Ontario
STEP 1: 60-SECOND PRICE CHECK
LOCK IN DIRECT CONTRACTOR PRICING

Fast Response & Quotes · No Commitment!

Tap to Select Your Project:
or call directly: 647-333-3626
VERIFIED, CERTIFIED & LISTED ON
Google5.0 ★ Verified
HomeStarsVerified Pro
Houzz ProListed Contractor
TrustedProsCanadian Directory
Caliber CertifiedCAN/ULC-S705.2
WSIB & CCMCOntario Cleared
Our Process

Our 4-Stage CSI Division 07 81 00 Cementitious Fireproofing Protocol

1

ULC Design Assembly & W/D Section-Factor Take-Off

Our estimators review structural steel schedules, calculate heated-perimeter W/D (Hp/A) ratios for every W-beam, HSS column, and fluted metal deck, and submit the exact ULC Design Assembly data sheet.

2

Substrate Prep, Bond Adhesive & Mechanical Lath

Steel and concrete surfaces are cleaned of rolling oils, mill scale, and laitance. Where mandated by ULC design (such as wide flanges or concrete transfer slabs), we apply ULC-listed bond adhesive or galvanized mechanical lath.

3

Calibrated Wet-Spray SFRM Application

Using high-output continuous mixer-pumps, our certified applicators contour-spray uniform passes of gypsum or Portland-cement SFRM to the required thickness for 1-hour to 4-hour CAN/ULC-S101 protection.

4

ASTM E605 / E736 Field Testing & Permit Sign-Off

We verify wet and cured thickness with calibrated pin gauges per ASTM E605, confirm bond strength per ASTM E736, and deliver your signed engineering closeout package for immediate municipal occupancy approval.

Cementitious Fireproofing (SFRM) project photo 1
Cementitious Fireproofing (SFRM) project photo 2
Interactive ULC Structural Assemblies

CAN/ULC-S101 Structural Steel & Concrete Fireproofing Explorer

CAD ARCHITECTURAL CROSS-SECTIONMetal Floor & Roof Decks
CORESTEEL
LAYER 01 — Fluted Steel Deck & OWSJ Trusses✓ Held < 538°C Yield
3–5 MILPRIMER
LAYER 02 — SSPC Surface Prep & Bond InterfaceASTM E736 Verified
1/2"–2"SFRM COAT
LAYER 03 — Cementitious SFRM Fireproofing1-Hr, 1.5-Hr, 2-Hr & 3-Hr Rated
900°C+ULC-S101
LAYER 04 — 900°C+ CAN/ULC-S101 Furnace ExposureStructural Collapse Prevented

* Under CAN/ULC-S101 fire exposure (900°C+), our fireproofing shield insulates the structural steel core below its critical 538°C (1,000°F) yield-loss threshold for 1 to 4 hours.

Fluted Composite Concrete-on-Steel Floor Decks & Roof Assemblies

Contour-sprayed fire-resistance ratings for corrugated steel floor assemblies, open-web steel joists (OWSJ), and plenum roof decks.

Division 07 81 00 — Cementitious Fireproofing (SFRM) Spec3/8" to 1-3/4" Direct-to-Deck Monokote® MK-6® / Z-106 or Cafco® Blaze-Shield® II with mechanical lath where required by ULC listing.
Division 07 81 23 — Thin-Film Intumescent Fire Coating Spec25 to 95 mils DFT Thin-Film Intumescent Mastic for exposed loft ceilings, retail plenums & open-web steel joist (OWSJ) chords.
Third-Party Field QA/QC & Engineer Verification Protocol4-Point Flute Crest, Web & Valley Pin-Depth Verification per ASTM E605 & Third-Party Professional Engineer Sign-Off.
2026 INSTALLED STRUCTURAL FIREPROOFING RATE$2.50 – $4.95 / sq ft$5,500 – $35,000+ (Floor / Roof Deck Scope) • Includes ULC & ASTM Submittal Package
Get My Price in 60s →
2026 Ontario Pricing & Code Specs

2026 Cementitious Fireproofing (SFRM) Cost Per Sq Ft in Toronto & Ontario

Installed commercial pricing by density class, ULC hourly rating, and structural assembly across the GTA and Ontario.

STANDARD DENSITY (15–19 PCF)

Concealed Structural Steel & Fluted Floor Decks

$2.50 – $4.95
/ sq ft installed
  • 1-Hour to 3-Hour CAN/ULC-S101 fire-resistance rating
  • Isolatek Cafco® 300 / Blaze-Shield® II or Monokote® MK-6®
  • Includes W/D section-factor thickness calculation
  • Full ASTM E605 pin-depth log & permit documentation
Get My Price in 60s →
MOST POPULAR — MEDIUM DENSITY (22–28 PCF)

Commercial Parkades, Mechanical Rooms & Shafts

$3.85 – $5.95
/ sq ft installed
  • 1-Hour to 4-Hour CAN/ULC-S101 & Ontario Building Code Part 3
  • GCP Monokote® Z-106 or Isolatek Cafco® 400 Portland system
  • High cohesive/adhesive bond strength (> 430 psf per ASTM E736)
  • Includes 24-Hr Blueprint Take-Off & ULC Submittal Pack
Get My Price in 60s →
HIGH DENSITY (40+ PCF PORTLAND)

High-Impact Loading Docks, Tunnels & Industrial Steel

$4.95 – $6.75+
/ sq ft installed
  • Up to 4-Hour structural fire endurance (ULC Z600 / X700)
  • Monokote® Z-146, Cafco® Fendolite® MII or Carboline Pyrocrete®
  • Withstands pressure washing, road salt & mechanical impact
  • Complete third-party engineering QA/QC binder included
Request Commercial Bid →
Structural Assembly / Density ClassULC Rating & Thickness RangeApproved Division 07 81 00 System2026 Cost Per Sq FtTypical Commercial Package Scope
Concealed Fluted Metal Floor / Roof Deck (15 PCF)1-Hr to 2-Hr (3/8" – 1-1/8")Monokote® MK-6® / Cafco® 300$2.50 – $4.25 / sq ft$7,500 – $45,000+ (By Deck Sq Ft)
Wide-Flange W-Beams & Columns (15–19 PCF)1-Hr to 3-Hr (1/2" – 1-7/8" by W/D)Cafco® Blaze-Shield® II / Monokote® MK-6®$2.75 – $4.95 / sq ft$5,500 – $38,000+ (Structural Package)
Underground Parkade & Podium Slab (22–28 PCF)2-Hr to 3-Hr (3/4" – 1-3/4")Monokote® Z-106 / Cafco® 400 Portland$3.85 – $5.95 / sq ft$12,000 – $65,000+ (Parkade Ceiling)
High-Impact Mechanical & Loading Dock (40+ PCF)2-Hr to 4-Hr (High-Bond Portland)Monokote® Z-146 / Fendolite® MII / Pyrocrete®$4.95 – $6.75 / sq ft$6,500 – $42,000+ (Industrial Zone)
Tenant Fit-Out & Post-Trade SFRM Patch/Respray1-Hr to 3-Hr Code RestorationMatched to Existing ULC Design Record$3.50 – $6.50 / sq ft$1,850 – $6,500 (Rapid Permit Rescue)
Commercial Blueprint Take-Offs

Instant Commercial Project Estimate

Calculate Estimate 647-333-3626

2026 Ontario Building Code & CAN/ULC-S101 Cementitious SFRM Engineering Ledger

CSI DIVISION 07 81 00 • CAN/ULC-S101 VERIFIED
CSI MasterFormat & Fire Endurance Standard
CSI Division 07 81 00 (Applied Fireproofing) • Tested to CAN/ULC-S101 & ASTM E119 for 1, 1.5, 2, 3 & 4-Hour Fire-Resistance Ratings
Ontario Building Code Compliance
Ontario Building Code Division B Section 3.1.5, Subsection 3.2.2 (Building Fire Safety) & Article 3.2.1.2 (Storage Garage / Podium Separation)
Surface Burning & Non-Combustibility
CAN/ULC-S102 & ASTM E84: Flame Spread Index = 0 to 10 • Smoke Developed Index = 0 to 10 • CAN/ULC-S114 Non-Combustible
In-Place Thickness & Density Verification
ASTM E605 Standard Test Methods for Thickness and Density of Sprayed Fire-Resistive Material (15 lb/ft³ Standard • 22 lb/ft³ Medium • 40+ lb/ft³ High Density)
Cohesion / Adhesion Bond Strength
ASTM E736 Bond Strength: ≥ 150–200 psf (Standard Concealed), ≥ 430 psf (Medium Density), ≥ 1,000 psf (High-Density Portland Cement)
Approved Cementitious Fireproofing Systems
Isolatek Cafco® 300 / 400 / Blaze-Shield® II / Fendolite® MII, GCP Applied Technologies (Grace) Monokote® MK-6® / MK-10 / Z-106 / Z-146, Carboline Pyrocrete® / Southwest Type 5GP & 7GP & other ULC-listed structural fireproofing systems
ULC Design Series Coverage
ULC Design Series D700 / D900 (Floor-Ceiling Decks), P700 / P900 (Roof-Ceiling), Z600 / X700 / Y700 (Structural Steel Columns & Beams)
Closeout & Occupancy Documentation
Signed ULC Design Submittal, W/D Ratio Schedule, Batch-Lot Tickets, ASTM E605/E736 Field Logbook & Permit Closeout Binder
Expert Insights

In-Depth: Cementitious Fireproofing (SFRM)

5 min read

CSI DIVISION 07 81 00 — APPROVED CEMENTITIOUS SFRM SYSTEMS

Selecting the correct density class is critical to passing third-party engineering inspection under the Ontario Building Code:

System / ProductDensity ClassBinder ChemistryPrimary Ontario Applications
Monokote® MK-6® / Cafco® 30015 lb/ft³ (Standard)GypsumConcealed steel beams, columns & fluted floor decks
Cafco® Blaze-Shield® II15–16.5 lb/ft³ (Dry Mix)Portland / Mineral FiberUnconditioned steel decks & acoustic/thermal plenums
Monokote® Z-106 / Cafco® 40022 lb/ft³ (Medium)Portland CementUnderground parking garages, elevator shafts & mechanical rooms
Monokote® Z-146 / Pyrocrete® / Fendolite®40+ lb/ft³ (High)High-Strength PortlandLoading docks, exterior canopies, industrial & severe abrasion zones

Need help matching a ULC Design number? Check your project pricing in 60 seconds (/price-chat) or review our 2026 Ontario Cementitious Fireproofing Engineering Guide.

HOW SECTION FACTOR (W/D) DRIVES REQUIRED THICKNESS

Under CAN/ULC-S101, structural steel fireproofing is never "one thickness fits all." Required thickness is governed by the member's W/D ratio (weight per foot W divided by heated perimeter D):

  • Light W-Beams & Open-Web Steel Joists (Low W/D < 0.60): High surface-area-to-mass ratio absorbs heat rapidly—requiring thicker SFRM contour passes (typically 7/8" to 1-3/4" for a 2-hour rating).
  • Heavy W14 Columns & Transfer Girders (High W/D > 1.50): High thermal mass slows temperature rise—requiring thinner SFRM build (typically 1/2" to 1-1/8" for a 2-hour rating).
  • Fluted Composite Steel Decks (ULC D700 / D900 Series): Measured across crest, web, and valley flutes to protect both the corrugated steel deck and shear studs.

PASSING THIRD-PARTY ENGINEERING & MUNICIPAL OCCUPANCY

Every commercial cementitious fireproofing installation is audited against strict field testing standards before ceilings close or occupancy permits are granted:

  • ASTM E605 Thickness Verification: Calibrated needle/pin gauge measurements logged across statistical bays (beams, columns, and deck flutes) to verify zero negative tolerance violations.
  • ASTM E605 Cured Density Sampling: Field samples oven-dried and weighed to confirm in-place density meets the ULC design minimum (15, 22, or 40 lb/ft³).
  • ASTM E736 Cohesive/Adhesive Bond Testing: Field pull tests verifying mechanical and chemical bond strength to primed or bare steel.

ONTARIO BUILDING CODE DIVISION B PART 3 MANDATES

The Ontario Building Code (Division B, Subsection 3.2.2 & Article 3.2.1.2) mandates fire-resistance ratings for primary structural frames, floor assemblies, and podium separations:

Building / Assembly ClassificationMandatory Fire RatingOntario Building Code Reference
High-Rise Residential, Office & Hospital (7+ Storeys)2 to 4 HoursOntario Building Code Div. B 3.2.2
Mid-Rise Commercial & Multi-Unit (4–6 Storeys)1.5 to 2 HoursOntario Building Code Div. B 3.2.2
Underground Storage Garage / Podium Transfer Slab2 to 3 HoursOntario Building Code Div. B 3.2.1.2 / 3.2.2
Low-Rise Commercial, Retail & Industrial Mezzanines45 Mins to 1.5 HoursOntario Building Code Div. B 3.2.2
FAQ

Frequently Asked Questions

How much does cementitious fireproofing (SFRM) cost per sq ft in Ontario in 2026?
In 2026 across Toronto, Mississauga, Brampton, Vaughan, Markham, Oakville, and across Ontario, commercial cementitious fireproofing (SFRM) installed by Sprayfoam Solutions Toronto Inc. costs $2.50 to $4.95 per sq ft for standard-density (15–19 lb/ft³ Monokote MK-6 / Cafco 300 & other ULC-listed structural fireproofing systems) concealed structural steel beams and fluted metal floor decks, and $3.85 to $6.75 per sq ft for medium-to-high-density (22–40+ lb/ft³) Portland-cement fireproofing in underground parking garages, commercial towers, mechanical rooms, and loading docks applied by our Caliber Certified (CAN/ULC-S705.2 Licensed) Installers and fireproofing teams. Call (647) 333-3626 or get a $250 Credit on Your Estimate — Check Your Price in 60 Seconds at spfsolutions.ca/price-chat (No Site Visit Required).
What is the difference between standard-density gypsum SFRM and medium/high-density Portland cement SFRM?
Standard-density SFRM (15–19 lb/ft³, such as Monokote® MK-6® or Cafco® 300) is a lightweight gypsum or mineral-fibre formula designed strictly for concealed, dry interior plenums above drop ceilings. Medium-density (22–28 lb/ft³, such as Monokote® Z-106 or Cafco® 400) and high-density (40+ lb/ft³, such as Monokote® Z-146, Fendolite® MII, or Pyrocrete®) use hydraulic Portland cement to resist moisture, freeze-thaw cycling, exhaust air velocity, and physical impact in exposed parkades and mechanical rooms.
How does the W/D (or Hp/A) section factor determine cementitious fireproofing thickness?
Under CAN/ULC-S101, the required thickness of cementitious fireproofing on a structural steel column or beam depends on its Weight-to-Heated-Perimeter ratio (W/D in imperial or Hp/A in metric). Heavy, thick-flanged steel sections heat up more slowly and require thinner SFRM, whereas lighter wide-flange beams or hollow structural sections (HSS) heat rapidly and require a thicker contour build to keep steel below its 538°C failure temperature for 1 to 4 hours.
What third-party inspection tests are required for cementitious fireproofing in Ontario?
Municipal building officials and third-party engineering firms in Ontario verify cementitious fireproofing against two primary standards: ASTM E605 (measuring wet and cured pin-gauge thickness across flute crests, webs, valleys, and flanges plus core sample dry density) and ASTM E736 (measuring cohesive/adhesive pull-off bond strength in pounds per square foot). We pre-test and log every zone so your third-party engineer signs off on the first visit.
Can you patch and recertify damaged cementitious fireproofing after HVAC, plumbing, or electrical retrofits?
Yes. During commercial tenant fit-outs, hospital renovations, or condo parkade rehabilitations, mechanical trades frequently scrape away existing SFRM to install hangers, ductwork, or core drills—triggering a municipal fire inspection hold. We mobilize rapidly to clean the exposed steel, apply ULC-matched cementitious fireproofing to the required hourly thickness, and issue a signed compliance report.
Which cementitious fireproofing brands and ULC systems do you install?
Our certified commercial crews install all major ULC-listed cementitious systems specified under CSI MasterFormat Division 07 81 00, including Isolatek Cafco® 300 / 400 / Blaze-Shield® II / Fendolite® MII, GCP Applied Technologies (Grace) Monokote® MK-6® / Z-106 / Z-146, Carboline Pyrocrete® / Southwest Type 5GP & 7GP & other ULC-listed structural fireproofing systems.
When should we specify Cementitious SFRM vs. Thin-Film Intumescent vs. DC315?
Specify Cementitious SFRM (Division 07 81 00) for concealed structural steel, metal decks, mechanical rooms, and parkades where cost-effective 1–4 hour CAN/ULC-S101 protection is needed. Specify Thin-Film Intumescent (Division 07 81 23, /fire-coatings/intumescent-fire-coating) when structural steel is architecturally exposed (AESS) in lobbies or atriums and requires a smooth paint-like finish. Specify IFTI DC315® (/fire-coating-dc315) when protecting exposed spray polyurethane foam insulation under CAN/ULC-S124.
Do you provide commercial blueprint take-offs across the GTA and all of Ontario?
Yes. Send your structural steel drawings, reflected ceiling plans, and Division 07 specifications to our commercial estimating desk or start at /price-chat. We deliver itemized per-square-foot bids across Toronto, Mississauga, Brampton, Vaughan, Hamilton, Ottawa, London, Waterloo, and all of Ontario.
Commercial Blueprint Take-Offs

Instant Commercial Project Estimate

Calculate Estimate 647-333-3626
2026 Ontario Guides & Resources

Related Cementitious Fireproofing (SFRM) Cost & Building Code Guides

Structural SFRM11 min read

Cementitious Fireproofing in Ontario: 2026 Cost, ULC-S101 & Density Guide

Complete 2026 engineering and cost guide for standard, medium, and high-density cementitious fireproofing (Monokote, Cafco, Pyrocrete) across Ontario.

Read Full 2026 Guide
Thermal Barrier9 min read

IFTI DC315 Fire Coating Cost in Ontario (2026 Price Per Sq Ft Guide)

Compare 15-minute CAN/ULC-S124 DC315 thermal barrier spray over foam against structural steel CAN/ULC-S101 fireproofing.

Read Full 2026 Guide
Building Code10 min read

How to Fireproof Spray Foam Insulation & Steel Assemblies in Ontario

How Ontario municipal inspectors enforce Ontario Building Code Division B fire-resistance ratings, thermal barriers, and ASTM E605 field verification.

Read Full 2026 Guide
Commercial10 min read

Commercial Warehouse Insulation & Fireproofing Cost in Ontario (2026)

Turnkey 2026 commercial warehouse envelope pricing combining 2 lb closed-cell spray foam and ULC-listed fire protection.

Read Full 2026 Guide

Proof of Performance

Trusted by Ontario's top builders, general contractors & homeowners.

Certified Installation & On-Time Delivery

5.0
(45+ Google Reviews)

“We had 20,000 sq ft of our logistics warehouse insulated with closed-cell spray foam. The building condensation is completely gone. Their commercial rig handled the project in just three days without interrupting our daily operations.”

Amit P.

Mississauga, ON

Facilities DirectorCommercialWarehouse Insulation

“They insulated a retail commercial building envelope for us. High-performance closed-cell foam acted as both insulation and vapor barrier. Excellent scheduling and pass on code inspection. Highly professional.”

Rajesh S.

Etobicoke, Toronto

General ContractorCommercialCommercial Spray Foam

“Used them for a multi-unit commercial project. They applied closed-cell spray foam on metal stud walls. Passed building code on the first inspection. Clean framing and no overspray. Excellent partner.”

Priya K.

Vaughan, ON

BuilderCommercialOffice Building Insulation

“Critical temperature control was required for our food distribution warehouse. They sprayed closed-cell foam on the ceiling and walls. Amazing condensation control and thermal barrier. Professional commercial crew.”

Muhammad A.

Brampton, ON

Facilities DirectorCommercialCold Storage Spray Foam

“We hired them to insulate a large steel commercial building. The closed-cell spray foam bonds perfectly to metal panels, stopping rust and drafts. Excellent WSIB-compliant, licensed crew.”

Fatima Z.

Markham, ON

Project ManagerCommercialMetal Building Insulation

“They sprayed our large farm workshop and barn walls. Condensation was ruining our equipment. Now the barn is draft-free and dry. Great commercial rates and top quality. Highly recommended.”

Vikram M.

Barrie, ON

Project ManagerCommercialAgricultural Spray Foam

“We use their commercial services for all our industrial buildings. Their rigs are top-of-the-line, and their installers are Caliber Certified (CAN/ULC-S705.2 licensed). Passed building inspections first try.”

Rohan D.

Hamilton, ON

BuilderCommercialCommercial Spray Foam

“Insulated a commercial property crawl space to stop drafts rising into offices. Polyurethane closed-cell foam was applied flawlessly. Punctual crew, WSIB insured, $5M liability coverage. Highly recommended.”

Tariq H.

Oakville, ON

Property ManagerCommercialCommercial Crawl Space

“Professional warehouse insulation project. They covered all our stock with plastic sheeting before spraying. Clean, code-compliant, and on-schedule. Our HVAC energy bills dropped by 35%.”

Yasmin R.

Pickering, ON

Facilities DirectorCommercialWarehouse Insulation

“Hired them to fix condensation in an industrial steel warehouse. Closed-cell spray foam solved the problem completely and added structural rigidity to the metal siding. Outstanding service.”

Sanjay G.

Kitchener, ON

General ContractorCommercialMetal Building Insulation

“Insulated four exterior industrial storage tanks using CCMC-approved closed-cell polyurethane foam. The thermal performance is exceptional. Safe mobilization, certified crews, and zero safety issues.”

Anjali V.

London, ON

Facilities DirectorCommercialSilo & Tank Insulation

“We needed custom shipping containers insulated for mobile office use. They sprayed 2 inches of closed-cell foam on the interior walls. No condensation, perfectly flat finish. Passed inspection easily.”

Chen W.

Toronto Port, Toronto

Project ManagerCommercialShipping Container Insulation

“Hired them to insulate a multi-story apartment building renovation. Spanning five floors, they completed the wall and floor assemblies on schedule. Professional, fully insured, and CCMC certified.”

Mei L.

Mississauga, ON

Property ManagerCommercialMulti-Unit Residential Insulation

“Excellent commercial insulation partner. We use them for all our steel-frame developments. Their high-output mobile rigs are fast, and the foam thickness is highly consistent. Excellent rates.”

Wei Z.

Vaughan, ON

General ContractorCommercialCommercial Spray Foam

“They insulated our older commercial warehouse ceiling. Closed-cell spray foam sealed all the deck joints and stopped winter drafts. We noticed a major reduction in gas bills.”

Ying H.

Brampton, ON

Facilities DirectorCommercialWarehouse Retrofit

“Hired Sprayfoam Solutions to restore our warehouse roof using a hybrid flat roof spray foam and silicone roof coating. No tear-off was required, saving us over $40,000 compared to a traditional roof replacement. The roof is 100% waterproof and reflects heat perfectly.”

Jun Y.

North York, Toronto

Facilities DirectorCommercialFlat Roof Spray Foam & Coating

“Our commercial flat roof was constantly leaking. They applied high-density spray foam and a high-solids silicone coating. It created a seamless, ponding-water resistant membrane. The project was completed on budget with zero downtime for our tenants.”

Linh N.

Mississauga, ON

Property ManagerCommercialFlat Roof Restoration

“Saved our commercial roof without a costly tear-off. They repaired the leaks and applied a reflective silicone coating. Rooftop temperatures dropped significantly, lowering our summer AC costs. Excellent service.”

Jin S.

Vaughan, ON

Facilities DirectorCommercialSilicone Roof Coating

“Outstanding roof restoration project. They applied 3lb high-density spray foam directly over our old membrane. Sealed every roof penetration perfectly. Excellent certified crew, WSIB insured.”

Min-Ji K.

Brampton, ON

Project ManagerCommercialCommercial Flat Roof

“Professional flat roof restoration. Seamless foam and silicone coating has stopped all leaks and significantly improved the building insulation. Professional, licensed team, and competitive pricing.”

Hao T.

Markham, ON

Property ManagerCommercialFlat Roof Restoration

“Great flat roof coating service. They performed a thermal scan to locate wet insulation, replaced those sections, and coated the roof with reflective silicone. 100% leak-proof and energy efficient.”

Raymond C.

Oakville, ON

Facilities DirectorCommercialSilicone Roof Coating

“Insulated and waterproofed our industrial plaza flat roof. Seamless high-density foam stops drafts and water leaks in one shot. Certified installers using CCMC-approved roofing systems.”

Kevin C.

Hamilton, ON

Project ManagerCommercialFlat Roof Spray Foam

“Professional, certified crews. They did a marvelous job applying silicone coating on our warehouse flat roof. Complete ponding water resistance and 20-year durability. Excellent work.”

Steven B.

Barrie, ON

Facilities DirectorCommercialRoof Silicone Coating

“We have used them for two flat roof restorations now. High-density spray foam followed by white reflective silicone. Tenants reported immediate comfort improvements. No leaks, highly recommended.”

Deborah D.

Oshawa, ON

Property ManagerCommercialCommercial Roof Restoration

“Restored our retail store flat roof without interrupting business. Seamless spray foam and silicone coating has survived two harsh winters with zero issues. Great warranties and WSIB insured.”

Edward M.

Kitchener, ON

Facilities DirectorCommercialFlat Roof Restoration

“Excellent roof restoration service. Thermal scan was done first to ensure no wet insulation was covered. The silicone coating application was very clean with no overspray on surrounding cars.”

Stephanie L.

London, ON

Project ManagerCommercialSilicone Roof Coating

“High-density polyurethane foam and reflective coating applied on our manufacturing facility roof. Lowered our cooling costs by 20% last summer. Excellent service, clean, and highly professional.”

Ronald K.

Vaughan, ON

Facilities DirectorCommercialFlat Roof Spray Foam

“We needed a certified 15-minute thermal barrier for a large commercial permit. Their DC315 application was flawlessly done, meeting all Building Code compliance standards on the first inspection. They provided full wet film thickness documentation.”

Rebecca P.

Scarborough, Toronto

General ContractorCommercialDC315 Fire Coating

“Highest rated fireproofing team in the GTA. They arrived within 48 hours for a CAN/ULC-S124 compliant intumescent coating project in a basement suite. The documentation provided was exactly what the inspector needed.”

Anthony G.

Mississauga, ON

General ContractorResidentialSpray Foam & DC315

“We use Sprayfoam Solutions for all our exposed spray foam projects. They apply the closed-cell foam and the DC315 fire coating on the same day—one crew, one mobilization. Saves time and framing stays clean.”

Laura J.

Vaughan, ON

BuilderResidentialDC315 Thermal Barrier

“Highly professional DC315 intumescent coating application on exposed spray foam in our mechanical rooms. The crew verified wet film thickness (WFT) continuously and left a spotless workspace. Passed inspection.”

Albert N.

Brampton, ON

Project ManagerCommercialDC315 Fire Coating

“Ontario Building Code requires a thermal barrier over exposed basement spray foam. Their DC315 application was fast and certified. They provided the CCMC evaluation report immediately for our permit file.”

Cynthia O.

Markham, ON

BuilderResidentialThermal Barrier Code Compliance

“They applied DC315 fire coating over exposed spray foam in an attic storage area. Passed building code inspection first try. Certified applicator, WSIB insured, and same-week scheduling. Excellent.”

Ryan S.

Oakville, ON

General ContractorCommercialDC315 Fire Coating

“We hire them for all our legal duplex conversions. They spray the closed-cell insulation and follow up with DC315 intumescent coating for code-compliant fire safety. Fast, neat, and highly professional.”

Kathleen D.

Hamilton, ON

BuilderResidentialSpray Foam & Fire Coating

“Excellent experience. Certified DC315 application over foam in a commercial mechanical loft. Passed inspection easily. They provided a full documentation package with CCMC evaluation reports.”

Justin F.

Barrie, ON

General ContractorCommercialDC315 Thermal Barrier

“We needed a 15-minute thermal barrier in an unfinished basement remodel. They sprayed the closed-cell foam and followed up with code-compliant DC315 fire coating. Passed building permit inspection.”

Amy W.

Kitchener, ON

BuilderResidentialDuplex Code Compliance

“Certified intumescent fire paint over spray foam. The application was clean with no overspray on steel beams or electrical runs. The crew was professional, polite, and fully WSIB insured.”

Brandon H.

London, ON

General ContractorCommercialDC315 Fire Coating

“Passed our building inspection with flying colors. The DC315 application met the 15-minute thermal barrier requirements under the Ontario building code. Highly professional service and documentation.”

Shirley A.

Oshawa, ON

General ContractorCommercialExposed Foam Fire Code

“Excellent duplex conversion project. They applied closed-cell spray foam and DC315 fire coating in the mechanical room. Outstanding coordination, clean work, and complete code compliance.”

Frank T.

East York, Toronto

BuilderResidentialDC315 Thermal Barrier

“Professional fire barrier application. They applied DC315 over exposed polyurethane spray foam. Certified thickness, verified WFT, and flawless documentation for our project engineers.”

Angela E.

Mississauga, ON

General ContractorCommercialDC315 Fire Coating

“Certified DC315 applicator. They sprayed our custom home crawl space foam and protected the space with ignition barrier coating. Neat, prompt, and completely compliant with local building codes.”

Gregory M.

Vaughan, ON

BuilderResidentialSpray Foam & Fire Paint

“They did a fantastic job with DC315 intumescent coating over foam in our commercial kitchen expansion. CCMC approved, passed municipal inspection first try. Professional and clean crews.”

Anna L.

Oakville, ON

General ContractorCommercialDC315 Thermal Barrier

“Hired them to apply cementitious fireproofing on the structural steel beams of a new commercial parking garage. Professional spray application of SFRM to code thickness. Passed third-party inspections first try with zero thickness issues.”

Fatima Z.

York, Toronto

General ContractorCommercialCementitious Fireproofing

“Excellent structural steel fireproofing service. They sprayed low-density cementitious material on the metal deck and columns. Crew worked safe at heights, fully WSIB compliant, and completed the job on schedule.”

Vikram M.

Mississauga, ON

BuilderCommercialCementitious Fireproofing

“We hire them for all our mid-rise commercial steel projects. Their crews apply cementitious fire resistive material (SFRM) to exact building code thickness. Prompt service, great prices, and fully insured.”

Rohan D.

Vaughan, ON

Project ManagerCommercialStructural Steel Fireproofing

“Passed our building inspection. They applied cementitious fire protection on steel columns in our new industrial building. Professional prep, excellent density control, and spotless cleanup. Great contractor.”

Tariq H.

Brampton, ON

BuilderCommercialCementitious Fireproofing

“Professional SFRM fireproofing contractor. They sprayed structural steel beams to meet 2-hour rating requirements. They provided complete technical documents and W/D ratio thickness charts for local inspectors.”

Yasmin R.

Markham, ON

General ContractorCommercialCommercial Fireproofing

“Sprayed cementitious fireproofing on steel deck and joists for our school project. Outstanding team, certified fireproofing crews, WSIB insured. They completed the work on schedule, passing inspection easily.”

Sanjay G.

Oakville, ON

BuilderCommercialStructural Steel Fireproofing

“Reliable commercial fireproofing contractor. Applied cementitious spray on structural steel beams in our new retail development. Excellent price, fast application, and zero scheduling delays.”

Anjali V.

Hamilton, ON

Project ManagerCommercialCementitious Fireproofing

“We needed medium-density cementitious fireproofing for a semi-exposed commercial parking deck. They applied the Monokote SFRM flawlessly. Passed thickness inspection first try. Outstanding crew.”

Chen W.

Barrie, ON

General ContractorCommercialParking Garage Fireproofing

“Great experience. They sprayed structural steel columns on our new commercial warehouse. The application thickness met all building code requirements. Highly professional, certified crews.”

Mei L.

Whitby, ON

BuilderCommercialCommercial Fireproofing

“Hired them to fireproof steel framing in a commercial office. They applied cementitious spray to exact specification and cleaned up every scrap of overspray. Passed inspections without issues.”

Wei Z.

Kitchener, ON

Project ManagerCommercialStructural Steel Fireproofing

“Highly professional SFRM application. They worked around our other trades to fireproof structural columns on schedule. Clean work, CCMC approved materials, WSIB insured. Will use again.”

Ying H.

London, ON

General ContractorCommercialCementitious Fireproofing

“We hired Sprayfoam Solutions to apply thin-film intumescent fire coating on architecturally exposed structural steel (AESS) beams in our new corporate headquarters lobby. The finish is incredibly smooth and looks like paint, yet provides a certified 2-hour fire rating. Passed third-party DFT testing first try.”

Jun Y.

Downtown Toronto, Toronto

General ContractorCommercialIntumescent Steel Fireproofing

“Outstanding thin-film intumescent application on exposed steel columns in a retail space. The architects wanted the steel visible, so cementitious was out. They did a marvelous job, primer and topcoat were perfectly applied.”

Linh N.

Mississauga, ON

BuilderCommercialIntumescent Fire Protection

“They applied intumescent coating on exposed timber beams in a heritage building restoration. Achieved code fire rating while preserving the historical wooden structure. Excellent workmanship, clean and professional.”

Jin S.

The Annex, Toronto

General ContractorCommercialAESS Fireproofing

“Excellent intumescent application for exposed structural steel in a commercial office. They verified dry film thickness (DFT) meticulously and provided complete documentation for the fire marshal. Passed inspection.”

Min-Ji K.

Vaughan, ON

Project ManagerCommercialIntumescent Steel Coating

“Hired them to apply intumescent fireproofing on steel structural columns in a new restaurant. Smooth finish, CAN/ULC-S101 compliant, and completed on schedule. Great contractor and pricing.”

Hao T.

Brampton, ON

BuilderCommercialThin-Film Intumescent

“Professional intumescent coating application on steel framing. Architects specified exposed steel look. This thin-film coating expanded perfectly in fire testing. Certified crews, WSIB insured, $5M liability.”

Raymond C.

Markham, ON

General ContractorCommercialAESS Fire Protection

“We needed a 1-hour fire rating on exposed structural steel columns. They applied thin-film water-based intumescent. Excellent smooth paint-like finish, on schedule, and zero issues with building code inspector.”

Kevin C.

Oakville, ON

Project ManagerCommercialIntumescent Fireproofing

“Great thin-film intumescent coating service. They worked weekends to prevent disrupting our ongoing commercial tenant operations. The finish looks spectacular and meets building code. Highly recommended.”

Raymond K.

Hamilton, ON

BuilderCommercialIntumescent Steel Coating

“They applied intumescent fire paint on exposed structural steel columns in a new school library. Smooth AESS finish, WSIB insured, same-week scheduling. Excellent coordination with our drywallers.”

Brenda C.

Barrie, ON

General ContractorCommercialIntumescent Fire Protection

“Professional thin-film intumescent application on exposed steel rafters. Excellent dry film thickness (DFT) reports provided. Passed building inspections first try. Best fireproofing contractor.”

Samuel G.

Pickering, ON

BuilderCommercialAESS Fireproofing

“They sprayed thin-film intumescent over steel framing in our commercial renovation. Cured quickly and was ready for topcoat in 24 hours. Certified crews, outstanding workmanship and pricing.”

Pamela R.

Kitchener, ON

General ContractorCommercialIntumescent Steel Coating

“Insulated and fireproofed historical timber beams in a heritage loft conversion. Thin-film intumescent kept the wood visible while meeting the 1-hour fire safety code. Outstanding workmanship.”

Benjamin B.

London, ON

BuilderCommercialHeritage Fire Protection

“We had 20,000 sq ft of our logistics warehouse insulated with closed-cell spray foam. The building condensation is completely gone. Their commercial rig handled the project in just three days without interrupting our daily operations.”

Amit P.

Mississauga, ON

Facilities DirectorCommercialWarehouse Insulation

“They insulated a retail commercial building envelope for us. High-performance closed-cell foam acted as both insulation and vapor barrier. Excellent scheduling and pass on code inspection. Highly professional.”

Rajesh S.

Etobicoke, Toronto

General ContractorCommercialCommercial Spray Foam

“Used them for a multi-unit commercial project. They applied closed-cell spray foam on metal stud walls. Passed building code on the first inspection. Clean framing and no overspray. Excellent partner.”

Priya K.

Vaughan, ON

BuilderCommercialOffice Building Insulation

“Critical temperature control was required for our food distribution warehouse. They sprayed closed-cell foam on the ceiling and walls. Amazing condensation control and thermal barrier. Professional commercial crew.”

Muhammad A.

Brampton, ON

Facilities DirectorCommercialCold Storage Spray Foam

“We hired them to insulate a large steel commercial building. The closed-cell spray foam bonds perfectly to metal panels, stopping rust and drafts. Excellent WSIB-compliant, licensed crew.”

Fatima Z.

Markham, ON

Project ManagerCommercialMetal Building Insulation

“They sprayed our large farm workshop and barn walls. Condensation was ruining our equipment. Now the barn is draft-free and dry. Great commercial rates and top quality. Highly recommended.”

Vikram M.

Barrie, ON

Project ManagerCommercialAgricultural Spray Foam

“We use their commercial services for all our industrial buildings. Their rigs are top-of-the-line, and their installers are Caliber Certified (CAN/ULC-S705.2 licensed). Passed building inspections first try.”

Rohan D.

Hamilton, ON

BuilderCommercialCommercial Spray Foam

“Insulated a commercial property crawl space to stop drafts rising into offices. Polyurethane closed-cell foam was applied flawlessly. Punctual crew, WSIB insured, $5M liability coverage. Highly recommended.”

Tariq H.

Oakville, ON

Property ManagerCommercialCommercial Crawl Space

“Professional warehouse insulation project. They covered all our stock with plastic sheeting before spraying. Clean, code-compliant, and on-schedule. Our HVAC energy bills dropped by 35%.”

Yasmin R.

Pickering, ON

Facilities DirectorCommercialWarehouse Insulation

“Hired them to fix condensation in an industrial steel warehouse. Closed-cell spray foam solved the problem completely and added structural rigidity to the metal siding. Outstanding service.”

Sanjay G.

Kitchener, ON

General ContractorCommercialMetal Building Insulation

“Insulated four exterior industrial storage tanks using CCMC-approved closed-cell polyurethane foam. The thermal performance is exceptional. Safe mobilization, certified crews, and zero safety issues.”

Anjali V.

London, ON

Facilities DirectorCommercialSilo & Tank Insulation

“We needed custom shipping containers insulated for mobile office use. They sprayed 2 inches of closed-cell foam on the interior walls. No condensation, perfectly flat finish. Passed inspection easily.”

Chen W.

Toronto Port, Toronto

Project ManagerCommercialShipping Container Insulation

“Hired them to insulate a multi-story apartment building renovation. Spanning five floors, they completed the wall and floor assemblies on schedule. Professional, fully insured, and CCMC certified.”

Mei L.

Mississauga, ON

Property ManagerCommercialMulti-Unit Residential Insulation

“Excellent commercial insulation partner. We use them for all our steel-frame developments. Their high-output mobile rigs are fast, and the foam thickness is highly consistent. Excellent rates.”

Wei Z.

Vaughan, ON

General ContractorCommercialCommercial Spray Foam

“They insulated our older commercial warehouse ceiling. Closed-cell spray foam sealed all the deck joints and stopped winter drafts. We noticed a major reduction in gas bills.”

Ying H.

Brampton, ON

Facilities DirectorCommercialWarehouse Retrofit

“Hired Sprayfoam Solutions to restore our warehouse roof using a hybrid flat roof spray foam and silicone roof coating. No tear-off was required, saving us over $40,000 compared to a traditional roof replacement. The roof is 100% waterproof and reflects heat perfectly.”

Jun Y.

North York, Toronto

Facilities DirectorCommercialFlat Roof Spray Foam & Coating

“Our commercial flat roof was constantly leaking. They applied high-density spray foam and a high-solids silicone coating. It created a seamless, ponding-water resistant membrane. The project was completed on budget with zero downtime for our tenants.”

Linh N.

Mississauga, ON

Property ManagerCommercialFlat Roof Restoration

“Saved our commercial roof without a costly tear-off. They repaired the leaks and applied a reflective silicone coating. Rooftop temperatures dropped significantly, lowering our summer AC costs. Excellent service.”

Jin S.

Vaughan, ON

Facilities DirectorCommercialSilicone Roof Coating

“Outstanding roof restoration project. They applied 3lb high-density spray foam directly over our old membrane. Sealed every roof penetration perfectly. Excellent certified crew, WSIB insured.”

Min-Ji K.

Brampton, ON

Project ManagerCommercialCommercial Flat Roof

“Professional flat roof restoration. Seamless foam and silicone coating has stopped all leaks and significantly improved the building insulation. Professional, licensed team, and competitive pricing.”

Hao T.

Markham, ON

Property ManagerCommercialFlat Roof Restoration

“Great flat roof coating service. They performed a thermal scan to locate wet insulation, replaced those sections, and coated the roof with reflective silicone. 100% leak-proof and energy efficient.”

Raymond C.

Oakville, ON

Facilities DirectorCommercialSilicone Roof Coating

“Insulated and waterproofed our industrial plaza flat roof. Seamless high-density foam stops drafts and water leaks in one shot. Certified installers using CCMC-approved roofing systems.”

Kevin C.

Hamilton, ON

Project ManagerCommercialFlat Roof Spray Foam

“Professional, certified crews. They did a marvelous job applying silicone coating on our warehouse flat roof. Complete ponding water resistance and 20-year durability. Excellent work.”

Steven B.

Barrie, ON

Facilities DirectorCommercialRoof Silicone Coating

“We have used them for two flat roof restorations now. High-density spray foam followed by white reflective silicone. Tenants reported immediate comfort improvements. No leaks, highly recommended.”

Deborah D.

Oshawa, ON

Property ManagerCommercialCommercial Roof Restoration

“Restored our retail store flat roof without interrupting business. Seamless spray foam and silicone coating has survived two harsh winters with zero issues. Great warranties and WSIB insured.”

Edward M.

Kitchener, ON

Facilities DirectorCommercialFlat Roof Restoration

“Excellent roof restoration service. Thermal scan was done first to ensure no wet insulation was covered. The silicone coating application was very clean with no overspray on surrounding cars.”

Stephanie L.

London, ON

Project ManagerCommercialSilicone Roof Coating

“High-density polyurethane foam and reflective coating applied on our manufacturing facility roof. Lowered our cooling costs by 20% last summer. Excellent service, clean, and highly professional.”

Ronald K.

Vaughan, ON

Facilities DirectorCommercialFlat Roof Spray Foam

“We needed a certified 15-minute thermal barrier for a large commercial permit. Their DC315 application was flawlessly done, meeting all Building Code compliance standards on the first inspection. They provided full wet film thickness documentation.”

Rebecca P.

Scarborough, Toronto

General ContractorCommercialDC315 Fire Coating

“Highest rated fireproofing team in the GTA. They arrived within 48 hours for a CAN/ULC-S124 compliant intumescent coating project in a basement suite. The documentation provided was exactly what the inspector needed.”

Anthony G.

Mississauga, ON

General ContractorResidentialSpray Foam & DC315

“We use Sprayfoam Solutions for all our exposed spray foam projects. They apply the closed-cell foam and the DC315 fire coating on the same day—one crew, one mobilization. Saves time and framing stays clean.”

Laura J.

Vaughan, ON

BuilderResidentialDC315 Thermal Barrier

“Highly professional DC315 intumescent coating application on exposed spray foam in our mechanical rooms. The crew verified wet film thickness (WFT) continuously and left a spotless workspace. Passed inspection.”

Albert N.

Brampton, ON

Project ManagerCommercialDC315 Fire Coating

“Ontario Building Code requires a thermal barrier over exposed basement spray foam. Their DC315 application was fast and certified. They provided the CCMC evaluation report immediately for our permit file.”

Cynthia O.

Markham, ON

BuilderResidentialThermal Barrier Code Compliance

“They applied DC315 fire coating over exposed spray foam in an attic storage area. Passed building code inspection first try. Certified applicator, WSIB insured, and same-week scheduling. Excellent.”

Ryan S.

Oakville, ON

General ContractorCommercialDC315 Fire Coating

“We hire them for all our legal duplex conversions. They spray the closed-cell insulation and follow up with DC315 intumescent coating for code-compliant fire safety. Fast, neat, and highly professional.”

Kathleen D.

Hamilton, ON

BuilderResidentialSpray Foam & Fire Coating

“Excellent experience. Certified DC315 application over foam in a commercial mechanical loft. Passed inspection easily. They provided a full documentation package with CCMC evaluation reports.”

Justin F.

Barrie, ON

General ContractorCommercialDC315 Thermal Barrier

“We needed a 15-minute thermal barrier in an unfinished basement remodel. They sprayed the closed-cell foam and followed up with code-compliant DC315 fire coating. Passed building permit inspection.”

Amy W.

Kitchener, ON

BuilderResidentialDuplex Code Compliance

“Certified intumescent fire paint over spray foam. The application was clean with no overspray on steel beams or electrical runs. The crew was professional, polite, and fully WSIB insured.”

Brandon H.

London, ON

General ContractorCommercialDC315 Fire Coating

“Passed our building inspection with flying colors. The DC315 application met the 15-minute thermal barrier requirements under the Ontario building code. Highly professional service and documentation.”

Shirley A.

Oshawa, ON

General ContractorCommercialExposed Foam Fire Code

“Excellent duplex conversion project. They applied closed-cell spray foam and DC315 fire coating in the mechanical room. Outstanding coordination, clean work, and complete code compliance.”

Frank T.

East York, Toronto

BuilderResidentialDC315 Thermal Barrier

“Professional fire barrier application. They applied DC315 over exposed polyurethane spray foam. Certified thickness, verified WFT, and flawless documentation for our project engineers.”

Angela E.

Mississauga, ON

General ContractorCommercialDC315 Fire Coating

“Certified DC315 applicator. They sprayed our custom home crawl space foam and protected the space with ignition barrier coating. Neat, prompt, and completely compliant with local building codes.”

Gregory M.

Vaughan, ON

BuilderResidentialSpray Foam & Fire Paint

“They did a fantastic job with DC315 intumescent coating over foam in our commercial kitchen expansion. CCMC approved, passed municipal inspection first try. Professional and clean crews.”

Anna L.

Oakville, ON

General ContractorCommercialDC315 Thermal Barrier

“Hired them to apply cementitious fireproofing on the structural steel beams of a new commercial parking garage. Professional spray application of SFRM to code thickness. Passed third-party inspections first try with zero thickness issues.”

Fatima Z.

York, Toronto

General ContractorCommercialCementitious Fireproofing

“Excellent structural steel fireproofing service. They sprayed low-density cementitious material on the metal deck and columns. Crew worked safe at heights, fully WSIB compliant, and completed the job on schedule.”

Vikram M.

Mississauga, ON

BuilderCommercialCementitious Fireproofing

“We hire them for all our mid-rise commercial steel projects. Their crews apply cementitious fire resistive material (SFRM) to exact building code thickness. Prompt service, great prices, and fully insured.”

Rohan D.

Vaughan, ON

Project ManagerCommercialStructural Steel Fireproofing

“Passed our building inspection. They applied cementitious fire protection on steel columns in our new industrial building. Professional prep, excellent density control, and spotless cleanup. Great contractor.”

Tariq H.

Brampton, ON

BuilderCommercialCementitious Fireproofing

“Professional SFRM fireproofing contractor. They sprayed structural steel beams to meet 2-hour rating requirements. They provided complete technical documents and W/D ratio thickness charts for local inspectors.”

Yasmin R.

Markham, ON

General ContractorCommercialCommercial Fireproofing

“Sprayed cementitious fireproofing on steel deck and joists for our school project. Outstanding team, certified fireproofing crews, WSIB insured. They completed the work on schedule, passing inspection easily.”

Sanjay G.

Oakville, ON

BuilderCommercialStructural Steel Fireproofing

“Reliable commercial fireproofing contractor. Applied cementitious spray on structural steel beams in our new retail development. Excellent price, fast application, and zero scheduling delays.”

Anjali V.

Hamilton, ON

Project ManagerCommercialCementitious Fireproofing

“We needed medium-density cementitious fireproofing for a semi-exposed commercial parking deck. They applied the Monokote SFRM flawlessly. Passed thickness inspection first try. Outstanding crew.”

Chen W.

Barrie, ON

General ContractorCommercialParking Garage Fireproofing

“Great experience. They sprayed structural steel columns on our new commercial warehouse. The application thickness met all building code requirements. Highly professional, certified crews.”

Mei L.

Whitby, ON

BuilderCommercialCommercial Fireproofing

“Hired them to fireproof steel framing in a commercial office. They applied cementitious spray to exact specification and cleaned up every scrap of overspray. Passed inspections without issues.”

Wei Z.

Kitchener, ON

Project ManagerCommercialStructural Steel Fireproofing

“Highly professional SFRM application. They worked around our other trades to fireproof structural columns on schedule. Clean work, CCMC approved materials, WSIB insured. Will use again.”

Ying H.

London, ON

General ContractorCommercialCementitious Fireproofing

“We hired Sprayfoam Solutions to apply thin-film intumescent fire coating on architecturally exposed structural steel (AESS) beams in our new corporate headquarters lobby. The finish is incredibly smooth and looks like paint, yet provides a certified 2-hour fire rating. Passed third-party DFT testing first try.”

Jun Y.

Downtown Toronto, Toronto

General ContractorCommercialIntumescent Steel Fireproofing

“Outstanding thin-film intumescent application on exposed steel columns in a retail space. The architects wanted the steel visible, so cementitious was out. They did a marvelous job, primer and topcoat were perfectly applied.”

Linh N.

Mississauga, ON

BuilderCommercialIntumescent Fire Protection

“They applied intumescent coating on exposed timber beams in a heritage building restoration. Achieved code fire rating while preserving the historical wooden structure. Excellent workmanship, clean and professional.”

Jin S.

The Annex, Toronto

General ContractorCommercialAESS Fireproofing

“Excellent intumescent application for exposed structural steel in a commercial office. They verified dry film thickness (DFT) meticulously and provided complete documentation for the fire marshal. Passed inspection.”

Min-Ji K.

Vaughan, ON

Project ManagerCommercialIntumescent Steel Coating

“Hired them to apply intumescent fireproofing on steel structural columns in a new restaurant. Smooth finish, CAN/ULC-S101 compliant, and completed on schedule. Great contractor and pricing.”

Hao T.

Brampton, ON

BuilderCommercialThin-Film Intumescent

“Professional intumescent coating application on steel framing. Architects specified exposed steel look. This thin-film coating expanded perfectly in fire testing. Certified crews, WSIB insured, $5M liability.”

Raymond C.

Markham, ON

General ContractorCommercialAESS Fire Protection

“We needed a 1-hour fire rating on exposed structural steel columns. They applied thin-film water-based intumescent. Excellent smooth paint-like finish, on schedule, and zero issues with building code inspector.”

Kevin C.

Oakville, ON

Project ManagerCommercialIntumescent Fireproofing

“Great thin-film intumescent coating service. They worked weekends to prevent disrupting our ongoing commercial tenant operations. The finish looks spectacular and meets building code. Highly recommended.”

Raymond K.

Hamilton, ON

BuilderCommercialIntumescent Steel Coating

“They applied intumescent fire paint on exposed structural steel columns in a new school library. Smooth AESS finish, WSIB insured, same-week scheduling. Excellent coordination with our drywallers.”

Brenda C.

Barrie, ON

General ContractorCommercialIntumescent Fire Protection

“Professional thin-film intumescent application on exposed steel rafters. Excellent dry film thickness (DFT) reports provided. Passed building inspections first try. Best fireproofing contractor.”

Samuel G.

Pickering, ON

BuilderCommercialAESS Fireproofing

“They sprayed thin-film intumescent over steel framing in our commercial renovation. Cured quickly and was ready for topcoat in 24 hours. Certified crews, outstanding workmanship and pricing.”

Pamela R.

Kitchener, ON

General ContractorCommercialIntumescent Steel Coating

“Insulated and fireproofed historical timber beams in a heritage loft conversion. Thin-film intumescent kept the wood visible while meeting the 1-hour fire safety code. Outstanding workmanship.”

Benjamin B.

London, ON

BuilderCommercialHeritage Fire Protection

CEMENTITIOUS FIREPROOFING EXPERTS

1 to 4 Hour CAN/ULC-S101 Structural Steel Protection
★★★★★5.0 Google Rating•55+ Verified Reviews•Serving Across Ontario
STEP 1: 60-SECOND PRICE CHECK
LOCK IN DIRECT CONTRACTOR PRICING

Fast Response & Quotes · No Commitment!

Tap to Select Your Project:
or call directly: 647-333-3626
VERIFIED, CERTIFIED & LISTED ON
Google5.0 ★ Verified
HomeStarsVerified Pro
Houzz ProListed Contractor
TrustedProsCanadian Directory
Caliber CertifiedCAN/ULC-S705.2
WSIB & CCMCOntario Cleared

Proudly Serving Toronto, GTA & All of Ontario

Direct contractor pricing · CAN/ULC-S101 & S124 Certified · $0 Travel Fee Across Ontario

Sprayfoam Solutions service coverage map across Toronto, GTA and Ontario
50+ Cities & Municipalities

With regional mobile crews stationed right near you, we charge $0 travel fees and stand as the best, most trusted contractor to serve your home or commercial building anywhere in Ontario.

WSIB Insured
6,500+ Projects Completed
Calculate Estimate →

Get Your Free Quote

Takes 10 seconds — we'll call you back.

Free Estimate No Obligation WSIB Cleared Licensed Caliber Certified
Call 647-333-3626 (7AM–9PM)
SERVING ALL ONTARIO:Ajax • Aurora • Barrie • Belleville • Bracebridge • Brampton • Brant • Brantford • Brock • Brockville • Burlington • Caledon • Cambridge • Chatham-Kent • Clarington • Collingwood • Cornwall • East Gwillimbury • Etobicoke • Fort Erie • Gravenhurst • Grimsby • Guelph • Halton Hills • Hamilton • Huntsville • Innisfil • Kawartha Lakes • King • Kingston • Kitchener • Lincoln • London • Markham • Milton • Mississauga • Muskoka • Newmarket • Niagara Falls • North York • Oakville • Orillia • Oshawa • Ottawa • Parry Sound • Pelham • Peterborough • Pickering • Port Colborne • Richmond Hill • Sarnia • Scarborough • Scugog • St. Catharines • St. Thomas • Stratford • Thorold • Toronto • Uxbridge • Vaughan • Wainfleet • Waterloo • Welland • West Lincoln • Whitby • Whitchurch-Stouffville • Windsor • Woodstock•Ajax • Aurora • Barrie • Belleville • Bracebridge • Brampton • Brant • Brantford • Brock • Brockville • Burlington • Caledon • Cambridge • Chatham-Kent • Clarington • Collingwood • Cornwall • East Gwillimbury • Etobicoke • Fort Erie • Gravenhurst • Grimsby • Guelph • Halton Hills • Hamilton • Huntsville • Innisfil • Kawartha Lakes • King • Kingston • Kitchener • Lincoln • London • Markham • Milton • Mississauga • Muskoka • Newmarket • Niagara Falls • North York • Oakville • Orillia • Oshawa • Ottawa • Parry Sound • Pelham • Peterborough • Pickering • Port Colborne • Richmond Hill • Sarnia • Scarborough • Scugog • St. Catharines • St. Thomas • Stratford • Thorold • Toronto • Uxbridge • Vaughan • Wainfleet • Waterloo • Welland • West Lincoln • Whitby • Whitchurch-Stouffville • Windsor • Woodstock

About Sprayfoam Solutions Toronto Inc

6,500+ projects completed since 2008. The Greater Toronto Area's trusted spray foam insulation & fireproofing contractor for commercial builders, general contractors, and homeowners.

647-333-3626Request a Quote
50 Howden Rd, Scarborough, ON M1R 3E4
100% Canadian Owned & OperatedLicensed • Up to $10M Insured • WSIB Clearance

Our Services

  • ›Spray Foam (Residential)
  • ›Spray Foam (Commercial)
  • ›Interior Sound Dampening
  • ›Fire Coating DC315
  • ›Cementitious Fireproofing
  • ›Intumescent Coating

Expert Guides

  • What is Spray Foam Insulation?
  • How Much Does Spray Foam Cost?
  • Our Chemicals & Technical Data
  • Customer Reviews (5.0 ★)
  • View Our Projects
  • Book Free On-Site Inspection

Areas We Serve

  • •Toronto & Central GTA
  • •Mississauga & Peel
  • •Oakville & Halton
  • •Vaughan & York Region
  • •Barrie & Simcoe County
  • •Muskoka & Cottage Country
  • •Waterloo & Tri-Cities
  • •Oshawa & Durham Region
  • + View All 50+ Cities
All project estimates, pricing illustrations, R-value metrics, and building code references on this website are for general informational purposes only and do not constitute a certified estimate or binding offer to contract. Formal written contracts provided by Sprayfoam Solutions Toronto Inc. following an on-site inspection strictly supersede all online representations. Subject to our Terms of Service and Privacy Policy.
AboutView Our WorkCustomer Reviews 5.0 ★CertificationsServicesAreas We ServeBlogContact UsTerms of ServicePrivacy Policy
© 2026 Spray Foam Solutions Toronto Inc. All Rights Reserved.