Sprayfoam SolutionsWe Serve GTA & Across Ontario!
Home

Residential

Major Projects
  • Custom New Homes
  • Additions & Renovations
  • Muskoka Cottages & Homes
  • Exterior Walls
  • Interior Ceiling Sound Dampening
Targeted Areas
  • Basements
  • Attics & Roof Decks
  • Crawl Spaces
  • Rim Joist Headers
  • Garages & Floors Over Garage
  • Cathedral Ceilings
  • Cantilevers & Overhangs
  • Under-Slab & Radiant Floors
  • Cold Rooms
  • RVs & Vans
  • Swimming Pools

Commercial

Buildings & Facilities
  • Commercial SPF & Fire Coating
  • Warehouse & Industrial
  • Metal Buildings
  • Barns & Agricultural
  • Multi-Unit Buildings
  • Flat Roof Systems
Specialty
  • Shipping Containers
  • Silos & Water Tanks

Code & Expert Guides

  • What is Spray Foam?
  • Cost of Spray Foam
  • Our Sprayfoam Chemicals
  • Certifications & Standards
  • Spray Foam Knowledge Base
Ontario Code & ULC Guides
  • Ontario R-Value & Code Guide
  • CAN/ULC-S705.2 Code Rules
  • Open-Cell vs. Closed-Cell

Thermal Barriers (Foam)

Core Systems
  • DC315 Intumescent Coating
  • Sprayfoam & Fire Coating (2-in-1)
Where Code Requires It
  • Mechanical & Furnace Rooms
  • Exposed Basements & Crawls
  • Attached Garage Ceilings
  • Warehouse Exposed Foam Decks
  • Unvented Attics & Roof Decks
  • Rim Joists & Floor Headers

Structural Fireproofing

Fireproofing Systems
  • Cementitious Fireproofing (SFRM)
  • Intumescent Fire Coating (Thin-Film)
Structural Assemblies
  • Structural Beams & Columns
  • Metal Floor & Roof Decks
  • Commercial Parkades & Garages
  • Architectural Exposed Steel (AESS)
  • Request Fire Spec & Quote

Code & Expert Guides

  • What is DC315 Fire Coating?
  • Cost of DC315 Fire Coating
  • Our Fire Coating Chemicals
  • Certifications & Standards
  • Fire Coating Knowledge Base
Ontario Code & ULC Guides
  • Ontario 15-Min Thermal Barrier
  • ULC 1–4 Hr Steel Ratings
  • DC315 vs. Type X Drywall
Locations
Ontario Service RegionsView All 50+ Cities →
Toronto & Central
Toronto · Etobicoke · North York · Scarborough
Peel Region
Mississauga · Brampton · Caledon
York Region
Vaughan · Markham · Richmond Hill · Newmarket
Halton Region
Oakville · Burlington · Milton · Halton Hills
Durham Region
Pickering · Whitby · Oshawa · Ajax · Clarington
Hamilton & Niagara
Hamilton · St. Catharines · Niagara Falls · Brantford
Kitchener / Waterloo / Guelph
Kitchener · Waterloo · Cambridge · Guelph
Barrie & Simcoe County
Barrie · Orillia · Innisfil · Collingwood
Muskoka & Cottage Country
Muskoka · Huntsville · Gravenhurst · Bracebridge
Windsor & Southwestern ON
Windsor · London · Sarnia · Chatham-Kent
Our WorkReviews
Contact UsGet My Pricing
Serving GTA & Beyond
Sprayfoam SolutionsWe Serve GTA & Across Ontario!
Home
Spray Foam Services
Overview & Guides
What is Spray Foam?Cost of Spray FoamOpen-Cell vs. Closed-CellOntario R-Value & Code Guide
Project Applications
Custom New HomesAdditions & RenovationsMuskoka Cottages & HomesExterior WallsInterior Ceiling Sound DampeningBasementsAttics & Roof DecksCrawl SpacesRim Joist HeadersGarages & Floors Over GarageCathedral CeilingsCantilevers & OverhangsUnder-Slab & Radiant FloorsCold RoomsRVs & VansSwimming Pools
Overview & Guides
Commercial SPF & Fire Coating OverviewCAN/ULC-S705.2 Code RulesCost of Spray Foam
Project Applications
Warehouse & IndustrialMetal BuildingsBarns & AgriculturalMulti-Unit BuildingsFlat Roof SystemsShipping ContainersSilos & Water Tanks
Overview & Guides
Our Sprayfoam ChemicalsCertifications & StandardsSpray Foam Knowledge Base
Fire Coatings
Overview & Guides
DC315 Fire Coating OverviewSprayfoam & DC315 Package (2-in-1)What is DC315 Fire Coating?Cost of DC315 Fire CoatingDC315 vs. Type X DrywallOntario 15-Min Thermal Barrier
Project Applications
Mechanical & Furnace RoomsExposed Basements & CrawlsAttached Garage CeilingsWarehouse Exposed Foam DecksUnvented Attics & Roof DecksRim Joists & Floor Headers
Overview & Guides
Intumescent Fire Coating OverviewULC 1–4 Hr Steel Fire Ratings
Project Applications
Structural Beams & ColumnsArchitectural Exposed Steel (AESS)Request Fire Spec & Quote
Overview & Guides
Cementitious Fireproofing OverviewULC 1–4 Hr Steel Fire Ratings
Project Applications
Metal Floor & Roof DecksCommercial Parkades & GaragesRequest Fire Spec & Quote
Overview & Guides
Our Fire Coating ChemicalsCertifications & StandardsFire Coating Knowledge Base
Ontario Service RegionsView All 50+ Cities →
Toronto & Central
Toronto · Etobicoke · North York · Scarborough
Peel Region
Mississauga · Brampton · Caledon
York Region
Vaughan · Markham · Richmond Hill · Newmarket
Halton Region
Oakville · Burlington · Milton · Halton Hills
Durham Region
Pickering · Whitby · Oshawa · Ajax · Clarington
Hamilton & Niagara
Hamilton · St. Catharines · Niagara Falls · Brantford
Kitchener / Waterloo / Guelph
Kitchener · Waterloo · Cambridge · Guelph
Barrie & Simcoe County
Barrie · Orillia · Innisfil · Collingwood
Muskoka & Cottage Country
Muskoka · Huntsville · Gravenhurst · Bracebridge
Windsor & Southwestern ON
Windsor · London · Sarnia · Chatham-Kent
Our WorkReviewsContact Us
More Info & Resources
› About Us› Certifications› All Services› Blog & Guides
We Serve GTA & Across Ontario!
Get My Pricing 647-333-3626
ADDITION, TOP-UP & GUT RENOVATION SPRAY FOAM EXPERTS
5.0 Google Rating·45+ Verified Reviews

Building a Home Addition or Gut Reno?
Pass Ontario Building Code Inspection With 2 lb Closed-Cell Spray Foam

2026 Quick Summary & Ballpark Cost

In 2026, Sprayfoam Solutions Toronto Inc. installs spray foam insulation for home additions, second-storey top-ups, underpin basements, and gut renovations across Toronto, Mississauga, Brampton, Vaughan, Markham, Oakville, and across Ontario for $2,800 to $9,500 ($3.50 to $6.50/sq ft). Our Caliber Certified (CAN/ULC-S705.2 Licensed) Installers apply CAN/ULC-S705.1 2 lb closed-cell foam to addition walls (R-22 to R-24), cantilevers (R-31), and roof decks (R-31 to R-50 per Ontario Building Code SB-12) with a Class II vapour barrier (<60 ng/Pa·s·m²) in one day. Call (647) 333-3626 or get a $250 Credit on Your Estimate — Check Your Price in 60 Seconds at spfsolutions.ca/price-chat (No Site Visit Required).

-$250 Estimate Credit
Get My Price in 60s 647-333-3626
Caliber Certified (CAN/ULC-S705.2) InstallersWSIB & Up to $10M InsuredCCMC Approved Foam Systems
Additions & Renovations Toronto project 1Additions & Renovations Toronto project 2Additions & Renovations Toronto project 3Additions & Renovations Toronto project 4Additions & Renovations Toronto project 5
Additions & Renovations — Certified Ontario Installation

Instant Price Estimate

Get your spray foam price & $250 Credit in 60s.

Caliber S705.2 Certified
WSIB Insured
OR QUICK QUOTE HERE

THE SPRAY FOAM EXPERTS

That Actually Lower Your Energy Bills
★★★★★5.0 Google Rating•55+ Verified Reviews•Serving Across Ontario
Tap to Select Your Project:
or call directly: 647-333-3626

Our Canadian Suppliers, Partners, Clients & Credentials

Canadian Owned logo
Mattamy Homes logo
WSIB Ontario logo
Treasure Hill logo
Huntsman logo
Minto logo
Carlisle logo
Daniels logo
Soprema logo
Geranium logo
Renovation Pitfalls

Sprayfoam vs Batt Insulation

Don't let cheap insulation ruin your new space. Standard fiberglass and cellulose leave critical gaps at the junctions where your old home meets the new extension.

1
Irregular tie-in junctions where new wood framing meets old brick, block, or uneven heritage lumber
THE SPRAYFOAM SOLUTION

Seamless Thermal Envelope Connection

STANDARD INSULATION

Fiberglass batts are cut by hand and stuffed in. They cannot seal the complex transition joints between the old house structure and new framing, leaving permanent draft tunnels.

SPRAYFOAM ADVANTAGE

Liquid polyurethane expands 30x in seconds, sealing the seam between old brick, existing wood, and new lumber. It creates a 100% continuous, gap-free thermal barrier.

Get My Price in 60s
2
Unvented flat roofs, cathedral ceilings, and shallow 2x4 heritage walls that cannot fit thick fiberglass batts
3
Strict municipal Ontario Building Code SB-12 building inspector requirements for R-24 walls, R-31 floors, and R-50+ ceilings
4
Freezing drafts and ice dams forming at the connection line between the original house and the new extension
5
Tight general contractor schedules where failed insulation/vapour barrier inspections delay drywallers by weeks
6
Cold cantilevered rear extensions and rooms over piers that stay 5°C colder than the rest of the house
THE SPRAYFOAM SOLUTION

Seamless Thermal Envelope Connection

STANDARD INSULATION

Fiberglass batts are cut by hand and stuffed in. They cannot seal the complex transition joints between the old house structure and new framing, leaving permanent draft tunnels.

SPRAYFOAM ADVANTAGE

Liquid polyurethane expands 30x in seconds, sealing the seam between old brick, existing wood, and new lumber. It creates a 100% continuous, gap-free thermal barrier.

Get My Price in 60s
The Solution

Why Toronto Renovators & GCs Choose 2 lb Closed-Cell Spray Foam

SEALS OLD-TO-NEW STRUCTURAL TIE-INS

Seals Old-to-New Structural Tie-Ins

Liquid-applied 2 lb closed-cell foam expands 30x on contact, bonding new dimensional lumber to historic brick, stone, and steel beams with zero air gaps.

OUTSIDEINSIDEStandard FiberglassCOLD DRAFTS LEAKING
3-IN-1 BARRIER

Air & Vapor Seal

Traditional insulation requires multiple trades, tapes, and barriers to stop air leaks. Spray foam does it in a single product.

Fiberglass Batts (5 Steps)
  • ✗ Fiberglass Batts (Insulation only)
  • ✗ Polyethylene Sheet (Vapour Barrier)
  • ✗ Tuck Tape (Sealing Joints)
  • ✗ Acoustical Sealant (Perimeters)
  • ✗ Expandable Foam Cans (Small gaps)
Closed-Cell Foam (1 Step)
  • ✓ 2 lb Closed-Cell Spray Foam (R-6.0/in)
  • ✓ Built-in Class II Vapour Retarder (< 60 ng)
  • ✓ Monolithic Air Seal (Ontario Building Code)
  • ✓ Up to +300% Wall Racking Strength
Stops moisture, condensation, & mold.
Additions & Renovations spray foam project photo 1
Additions & Renovations spray foam project photo 2
Additions & Renovations spray foam project photo 3

THE SPRAY FOAM EXPERTS

That Actually Lower Your Energy Bills
★★★★★5.0 Google Rating•55+ Verified Reviews•Serving Across Ontario
STEP 1: 60-SECOND PRICE CHECK
LOCK IN DIRECT CONTRACTOR PRICING

Fast Response & Quotes · No Commitment!

Tap to Select Your Project:
or call directly: 647-333-3626
VERIFIED, CERTIFIED & LISTED ON
Google5.0 ★ Verified
HomeStarsVerified Pro
Houzz ProListed Contractor
TrustedProsCanadian Directory
Caliber CertifiedCAN/ULC-S705.2
WSIB & CCMCOntario Cleared
Our Process

Our Addition & Gut Renovation Spray Foam Process

1

Permit Plan Review & GC Coordination

Permit Plan Review & GC Coordination

We review your architectural drawings or cavity measurements, confirm Ontario Building Code SB-12 R-value targets, and book around your electrical and HVAC rough-in inspections.

2

Occupied-Home Containment & Masking

8:00 AM - 10:00 AM
Occupied-Home Containment & Masking

Caliber Certified (CAN/ULC-S705.2 Licensed) Spray Foam Installers isolate the renovation zone from occupied rooms, mask windows/doors, and run negative-air exhaust.

3

Walls, Cantilevers & Roof Deck Spraying

10:00 AM - 3:00 PM
Walls, Cantilevers & Roof Deck Spraying

We spray CAN/ULC-S705.1 2 lb closed-cell foam into exterior stud walls, steel I-beam pockets, subfloor cantilevers, and unvented flat or cathedral roof decks.

4

Flush Stud Shaving & CCMC Permit Certificate

3:00 PM - 5:00 PM
Flush Stud Shaving & CCMC Permit Certificate

All wall studs are shaved flush for drywall, foam trimmings are vacuumed clean, and the mandatory CCMC/CAN-ULC-S705.2 inspection placard is posted on site.

Additions & Renovations project photo 1
Additions & Renovations project photo 2
Technical Specs

What We Use & Why

Foam Type

Closed-Cell (2 lb Medium-Density)

Required for high R-value per inch in shallow heritage walls, unvented flat roofs, and cantilevered addition floors.

Thickness

3.5"–4.0" Walls / 5.0"–6.5" Ceilings & Floors

Continuous custom depth applied on-site.

Insulation Performance

R-21 to R-24 (Walls) / R-31 to R-40+ (Roofs & Floors)

Locks out thermal transfer and air leakage.

Application Rationale (Exterior Walls)

Exterior walls are the primary source of building heat loss. Using 2 lb closed-cell foam (CAN/ULC-S705.1) provides a seamless thermal envelope, continuous air barrier, and Class II vapour retarder in a single pass.

EXTERIOR SUBSTRATEDRYWALL3.5"–4.0" SPRAY FOAMAIR & VAPOUR SEALOUTSIDE COLDWARM INTERIOR

Foam Type

2 lb Closed-Cell Spray Foam (CAN/ULC-S705.1)

Blocks radiant roof heat and indoor vapour drive, creating a code-compliant unvented roof or garage ceiling assembly.

Thickness

5.0" – 6.0" Continuous

Continuous custom depth applied on-site.

Insulation Performance

R-31 to R-36+ (Ontario Building Code SB-12 Ceiling/Roof Standard)

Locks out thermal transfer and air leakage.

Application Rationale (Ceilings & Roofs)

Roof and ceiling assemblies bear the brunt of solar radiant heat in summer and rising heat in winter. Closed-cell spray foam creates an airtight thermal deck that stops ice dams and vapour drive.

ROOF / CEILING DECKDRYWALL THERMAL BARRIER5.0" – 6.0" Co (R-31 to R-36+)OUTSIDE COLD / SNOWWARM & COZY INTERIOR

Foam Type

2 lb Closed-Cell Spray Foam (CAN/ULC-S705.1)

Expands 30x into wood-to-concrete transitions to eliminate cold floor drafts and condensation.

Thickness

3.5" – 4.0" Perimeter Seal

Continuous custom depth applied on-site.

Insulation Performance

R-21 to R-24 (Monolithic Air & Vapour Seal)

Locks out thermal transfer and air leakage.

Application Rationale (Joist Bays)

Joist bays and framing connections are highly prone to air leakage and thermal bridging. Closed-cell spray foam expands into all framing gaps to prevent cold drafts and condensation.

FOUNDATION / BASESILL PLATERIM JOISTSUBFLOOR / SLAB3.5" – 4.0" Pe CLOSED-CELLSEALS ALL DRAFTSOUTSIDE COLD AIRWARM INTERIOR ENVELOPE
2026 Ontario Pricing & Code Specs

2026 Home Addition & Renovation Spray Foam Cost Guide (Toronto & GTA)

Realistic 2026 installed square-foot and package pricing for Toronto rear extensions, second-storey top-ups, and gut renovations.

SINGLE-ROOM GUT RENO

Kitchen, Bath or Main-Floor Gut Wall Package

$2,200 – $3,800
Typical 450–850 Sq. Ft. Wall & Rim Area
  • 3.5" to 4.0" of 2 lb closed-cell foam in 2x4/2x6 walls (R-21–R-24)
  • Seals floor-to-floor rim joists and plumbing stack chases
  • Includes window/door foaming, masking & flush stud shaving
  • Get a $250 Credit on Your Estimate in our 60-second online estimator
Get My Price in 60s →
MOST POPULAR — REAR EXTENSION

1- or 2-Storey Rear Addition Full Envelope

$3,900 – $6,800
Walls + Flat Roof Deck + Cantilever Floor
  • 3.5"–4.0" closed-cell on exterior walls (R-21 to R-24)
  • 5.0"+ closed-cell on cantilevered floor & flat roof deck (R-31+)
  • Encapsulates structural steel W-beams and old-to-new tie-ins
  • Includes CCMC compliance sheet for municipal inspection
Get My Price in 60s →
TOP-UP / WHOLE-HOME GUT RENO

Second-Storey Top-Up or Full Gut Renovation

$6,900 – $12,500
Full Multi-Level Walls, Roof Deck & Rim Joists
  • Complete thermal & Class II vapour barrier across all levels
  • R-24 exterior walls + R-31 to R-50+ unvented roof assemblies
  • Stiffens heritage framing and blocks street noise transmission
  • Installed by Caliber Certified (CAN/ULC-S705.2) Crews
Get My Price in 60s →
Application / Package ScopeFoam Type & DepthTarget R-Value (Ontario Building Code SB-12)2026 Cost Per Sq FtTypical Installed Project Total
Gut-Reno Exterior 2x4 or 2x6 Stud Walls2 lb Closed-Cell (3.5" – 4.0")R-21 to R-24$3.50 – $4.85 / sq. ft.$2,200 – $4,500
Addition Cantilevered Subfloor or Crawl Space Floor2 lb Closed-Cell (5.0" – 5.2")R-31 (Ontario Building Code SB-12 Floor Code)$5.10 – $6.40 / sq. ft.$1,800 – $3,400
Addition Unvented Flat Roof or Cathedral Ceiling Deck2 lb Closed-Cell (5.0" – 6.5")R-31 to R-40 Unvented Roof$5.25 – $7.20 / sq. ft.$2,400 – $4,800
Rear 1-Storey Family Room / Kitchen Extension Package2 lb Closed-Cell (Walls + Roof + Floor)R-24 Walls / R-31+ Roof & Floor$4.20 – $5.90 / sq. ft. avg.$3,800 – $6,500
Second-Storey Top-Up or Whole-Home Gut Renovation2 lb Closed-Cell Full EnvelopeR-24 Walls / R-40 to R-50 Roof$3.95 – $5.65 / sq. ft. avg.$6,900 – $12,500
-$250 Estimate Credit

60-Second Instant Ballpark

Get My Price in 60s 647-333-3626

2026 Ontario Building Code SB-12 & CAN/ULC-S705.1 Addition & Renovation Specifications

Ontario Building Code SB-12 & CCMC VERIFIED
Material & Installation Standard
CAN/ULC-S705.1 Medium-Density Closed-Cell & CAN/ULC-S705.2 Caliber Certified
2026 Ontario Building Code Target
Ontario Building Code SB-12 — R-22 to R-24 Walls / R-31 Floors & Unvented Low-Slope Roofs / R-50+ Attics
Aged Thermal Resistance (LTTR)
R-6.0 per inch (CAN/ULC-S770)
Air Barrier Permeance
< 0.02 L/(s·m²) @ 75 Pa (Seals Old-to-New Structural Tie-Ins)
Vapour Permeance
< 60 ng/(Pa·s·m²) at ≥ 2.0" (Class II — No 6-Mil Poly Required)
Approved CCMC Chemical Systems
BASF Walltite® Eco v.3, Huntsman Building Solutions (Icynene/Demilec), Johns Manville & other approved CCMC spray foam chemicals
Thermal Barrier Requirement
1/2" Gypsum Drywall over framing per Ontario Building Code 9.10.17.10 before occupancy
Warranty & Documentation
Transferable Lifetime Material Warranty + Caliber CAN/ULC-S705.2 Daily Lot & Municipal Permit Sign-Off Sheet
Expert Insights

In-Depth: Additions & Renovations

5 min read

The #1 comfort complaint in home additions is air leakage and frost formation along the structural seam where the new wood framing meets the original brick or block wall. Because heritage masonry is uneven, rigid foam boards and fiberglass batts leave continuous 1/4-inch to 1-inch air channels behind the drywall.

CAN/ULC-S705.1 2 lb closed-cell spray foam expands into every mortar joint, ledger board bolt hole, and framing intersection, creating a continuous Ontario Building Code-compliant air barrier (<0.02 L/s·m²) that locks the old house and new addition into a single airtight envelope.

Most Toronto rear additions feature two high-risk assemblies: a low-slope/flat roof deck above and a cantilevered floor or pier crawl space below. Neither assembly can be properly ventilated, and both suffer severe heat loss when insulated with fibrous batts.

By spraying 5.0" to 6.5" of 2 lb closed-cell foam (R-31 to R-40+) directly against the underside of the flat roof sheathing and cantilevered subfloor, our Caliber Certified (CAN/ULC-S705.2 Licensed) Spray Foam Installers deliver a monolithic Class II vapour barrier (<60 ng/Pa·s·m²) that prevents roof deck rot and keeps kitchen tile floors warm in January.

Modern gut renovations replace interior load-bearing walls with heavy steel W-beams and LVL headers whose ends pocket directly into cold exterior masonry walls. Without continuous closed-cell encapsulation, winter cold travels several feet along the steel beam, causing indoor humidity to condense and stain new drywall ceilings.

Comparing open-cell vs. closed-cell spray foam shows why only medium-density 2 lb closed-cell foam has the vapour impermeability required to wrap structural steel safely.

Construction delays cost homeowners and general contractors thousands of dollars per week. Review our 2026 Ontario R-Value Guide and 2026 Cost Per Square Foot Breakdown, or Get a $250 Credit on Your Estimate — Check Your Price in 60 Seconds with no site visit required.

FAQ

Frequently Asked Questions

How much does spray foam insulation cost for a home addition or gut renovation in 2026?
In 2026, spray foam insulation installed by Sprayfoam Solutions Toronto Inc. for a home addition, second-storey top-up, underpin basement, or gut renovation across Toronto, Mississauga, Brampton, Vaughan, Markham, Oakville, and across Ontario typically costs between $2,800 and $9,500 depending on scope, or $3.50 to $6.50 per square foot based on foam thickness (3.5"–4.0" for R-21–R-24 walls and 5.0"–6.5" for R-31–R-40+ cantilevers and flat roof decks) applied by our Caliber Certified (CAN/ULC-S705.2 Licensed) Installers. Call (647) 333-3626 or get a $250 Credit on Your Estimate — Check Your Price in 60 Seconds at spfsolutions.ca/price-chat (No Site Visit Required).
Does a new home addition have to meet 2026 Ontario Building Code R-values even on a 100-year-old house?
Yes. Under Ontario Building Code Part 11 and SB-12, any newly framed addition—and any existing exterior walls or ceilings stripped to the studs during a permitted renovation—must meet current energy efficiency targets (typically R-22 to R-24 walls, R-31 exposed floors, and R-31 to R-50+ ceilings) or maximum cavity fill approved by your municipal building inspector.
Why is 2 lb closed-cell spray foam required for flat roofs on Toronto rear extensions?
Rear kitchen and family room additions almost always use low-slope or flat roof joists that cannot be cross-ventilated like a peaked attic. Stuffing fiberglass batts into an unvented flat roof causes winter indoor moisture to condense against the cold roof sheathing and rot the joists within years. Spraying 5.0" to 6.5" of CAN/ULC-S705.1 2 lb closed-cell foam directly to the roof deck prevents air and vapour from ever touching the cold OSB.
How do you insulate steel I-beams (W-beams) in open-concept kitchen renovations?
When load-bearing walls are removed in a Toronto renovation, structural steel I-beams often rest in exterior brick pockets or support second-floor joists. Because steel conducts cold rapidly, uninsulated beams sweat and drip in winter. We encapsulate the entire steel web and flanges in 2 lb closed-cell foam to eliminate the thermal bridge.
Can we live in part of our home while you spray foam the addition?
We poly-seal the renovation zone completely from the rest of the house and run high-CFM negative-air exhaust fans ducted directly outdoors during application. While the work area and any shared HVAC zones require a standard 24-hour ventilation period before unmasked occupancy, our containment keeps adjacent finished rooms clean.
How quickly can you schedule with my general contractor after rough-in inspection?
We work with over 200 GTA general contractors and custom renovators and typically dispatch Caliber Certified (CAN/ULC-S705.2 Licensed) Spray Foam Installers within 48 to 72 hours of your electrical and plumbing rough-in sign-off so your drywallers never lose a day.
Do you remove old fiberglass batts or horsehair plaster debris before spraying?
If existing exterior walls have already been opened up (drywall or lath-and-plaster removed), we can extract and bag old fiberglass or mineral wool batts so the sheathing is clean and dry before applying 2 lb closed-cell spray foam.
What paperwork does the Toronto building inspector need to pass my insulation inspection?
Municipal inspectors across Toronto, Mississauga, Vaughan, and Markham require the CAN/ULC-S705.2 site label showing the CCMC evaluation number, chemical batch numbers, installed thickness, and Caliber installer license number. We leave the signed sticker on site and email you a digital PDF copy.
-$250 Estimate Credit

60-Second Instant Ballpark

Get My Price in 60s 647-333-3626
2026 Ontario Guides & Resources

Related Additions & Renovations Cost & Building Code Guides

Ontario Building Code Inspection9 min read

Ontario Building Code Rules for Spray Foam Insulation (2026)

Pass your municipal renovation and addition framing/insulation inspection on the first visit with CCMC documentation.

Read Full 2026 Guide
R-Value Chart7 min read

2026 Ontario R-Value Guide for Additions, Walls & Roof Decks

Exact Ontario Building Code SB-12 R-value requirements for rear extensions, flat roofs, cantilevers, and gut renovations.

Read Full 2026 Guide
2026 Pricing10 min read

Spray Foam Insulation Cost Per Square Foot in Canada (2026)

Compare 2026 per-square-foot costs for 2 lb closed-cell spray foam across residential renovations and additions.

Read Full 2026 Guide
Building Science8 min read

Open-Cell vs. Closed-Cell Spray Foam: Which Works in Ontario?

Why unvented flat addition roofs and steel beam pockets require 2 lb closed-cell spray foam to prevent condensation.

Read Full 2026 Guide

Proof of Performance

Trusted by Ontario's top builders, general contractors & homeowners.

Certified Installation & On-Time Delivery

5.0
(45+ Google Reviews)

“Had our entire basement insulated with closed-cell spray foam before finishing. The crew showed up on time, protected everything with plastic sheeting, and were done in one day. Basement stays warm now even in January. Highly recommend.”

Michael R.

Toronto, ON

HomeownerResidentialBasement Spray Foam

“We hired Sprayfoam Solutions for our century home renovation. They sprayed the attic to hit R-60 compliance—the difference in heating costs is night and day. Professional team, fair pricing, and they cleaned up after themselves.”

Sarah T.

The Annex, Toronto

HomeownerResidentialAttic Spray Foam

“Used them to spray the garage ceiling below our master bedroom. No more freezing floors in winter. The 2lb closed-cell foam stopped all cold drafts. Fast scheduling and very clean execution.”

David K.

Toronto, ON

HomeownerResidentialGarage Ceiling Spray Foam

“As a custom home builder, I need sub-trades that show up on time and respect the schedule. Their certified crew sprayed the entire building envelope. Passed framing inspection first try with zero trimming delays.”

James L.

Woodbridge, ON

BuilderResidentialNew Construction Spray Foam

“We had 20,000 sq ft of our logistics warehouse insulated with closed-cell spray foam. The building condensation is completely gone. Their commercial rig handled the project in just three days without interrupting our daily operations.”

Amit P.

Mississauga, ON

Facilities DirectorCommercialWarehouse Insulation

“They insulated a retail commercial building envelope for us. High-performance closed-cell foam acted as both insulation and vapor barrier. Excellent scheduling and pass on code inspection. Highly professional.”

Rajesh S.

Etobicoke, Toronto

General ContractorCommercialCommercial Spray Foam

“Used them for a multi-unit commercial project. They applied closed-cell spray foam on metal stud walls. Passed building code on the first inspection. Clean framing and no overspray. Excellent partner.”

Priya K.

Vaughan, ON

BuilderCommercialOffice Building Insulation

“Critical temperature control was required for our food distribution warehouse. They sprayed closed-cell foam on the ceiling and walls. Amazing condensation control and thermal barrier. Professional commercial crew.”

Muhammad A.

Brampton, ON

Facilities DirectorCommercialCold Storage Spray Foam

“Hired Sprayfoam Solutions to restore our warehouse roof using a hybrid flat roof spray foam and silicone roof coating. No tear-off was required, saving us over $40,000 compared to a traditional roof replacement. The roof is 100% waterproof and reflects heat perfectly.”

Jun Y.

North York, Toronto

Facilities DirectorCommercialFlat Roof Spray Foam & Coating

“Our commercial flat roof was constantly leaking. They applied high-density spray foam and a high-solids silicone coating. It created a seamless, ponding-water resistant membrane. The project was completed on budget with zero downtime for our tenants.”

Linh N.

Mississauga, ON

Property ManagerCommercialFlat Roof Restoration

“Saved our commercial roof without a costly tear-off. They repaired the leaks and applied a reflective silicone coating. Rooftop temperatures dropped significantly, lowering our summer AC costs. Excellent service.”

Jin S.

Vaughan, ON

Facilities DirectorCommercialSilicone Roof Coating

“Outstanding roof restoration project. They applied 3lb high-density spray foam directly over our old membrane. Sealed every roof penetration perfectly. Excellent certified crew, WSIB insured.”

Min-Ji K.

Brampton, ON

Project ManagerCommercialCommercial Flat Roof

“We needed a certified 15-minute thermal barrier for a large commercial permit. Their DC315 application was flawlessly done, meeting all Building Code compliance standards on the first inspection. They provided full wet film thickness documentation.”

Rebecca P.

Scarborough, Toronto

General ContractorCommercialDC315 Fire Coating

“Highest rated fireproofing team in the GTA. They arrived within 48 hours for a CAN/ULC-S124 compliant intumescent coating project in a basement suite. The documentation provided was exactly what the inspector needed.”

Anthony G.

Mississauga, ON

General ContractorResidentialSpray Foam & DC315

“We use Sprayfoam Solutions for all our exposed spray foam projects. They apply the closed-cell foam and the DC315 fire coating on the same day—one crew, one mobilization. Saves time and framing stays clean.”

Laura J.

Vaughan, ON

BuilderResidentialDC315 Thermal Barrier

“Highly professional DC315 intumescent coating application on exposed spray foam in our mechanical rooms. The crew verified wet film thickness (WFT) continuously and left a spotless workspace. Passed inspection.”

Albert N.

Brampton, ON

Project ManagerCommercialDC315 Fire Coating

“We hired Sprayfoam Solutions to apply a polyurea secondary containment lining for our municipal wastewater infrastructure. The coating cured in seconds and was return-to-service within 24 hours. Flawless crack-bridging and chemical resistance. Passed TSSA compliance inspections.”

Raymond K.

Hamilton, ON

Municipal EngineerIndustrialSecondary Containment Lining

“They waterproofed our commercial parking deck using a traffic-bearing polyurea membrane. It has held up perfectly against road salt and winter snowplows. Zero leaks reported. Certified applicator, $5M liability.”

Brenda C.

North York, Toronto

Facilities DirectorCommercialParking Deck Waterproofing

“Outstanding industrial polyurea application. We needed chemical containment lining for our fuel storage tanks. Monolithic membrane has zero seams and fits TSSA 110% capacity guidelines. High-end workmanship.”

Samuel G.

Mississauga, ON

Project ManagerIndustrialChemical Containment Coating

“Rehabilitated our concrete sewage digester tanks using polyurea coating. It protects the concrete from harsh hydrogen sulfide corrosion. Mobile rigs handled the project perfectly. Excellent municipal partner.”

Pamela R.

London, ON

Municipal EngineerIndustrialWastewater Infrastructure Lining

“Hired them to apply cementitious fireproofing on the structural steel beams of a new commercial parking garage. Professional spray application of SFRM to code thickness. Passed third-party inspections first try with zero thickness issues.”

Fatima Z.

York, Toronto

General ContractorCommercialCementitious Fireproofing

“Excellent structural steel fireproofing service. They sprayed low-density cementitious material on the metal deck and columns. Crew worked safe at heights, fully WSIB compliant, and completed the job on schedule.”

Vikram M.

Mississauga, ON

BuilderCommercialCementitious Fireproofing

“We hire them for all our mid-rise commercial steel projects. Their crews apply cementitious fire resistive material (SFRM) to exact building code thickness. Prompt service, great prices, and fully insured.”

Rohan D.

Vaughan, ON

Project ManagerCommercialStructural Steel Fireproofing

“Passed our building inspection. They applied cementitious fire protection on steel columns in our new industrial building. Professional prep, excellent density control, and spotless cleanup. Great contractor.”

Tariq H.

Brampton, ON

BuilderCommercialCementitious Fireproofing

“We hired Sprayfoam Solutions to apply thin-film intumescent fire coating on architecturally exposed structural steel (AESS) beams in our new corporate headquarters lobby. The finish is incredibly smooth and looks like paint, yet provides a certified 2-hour fire rating. Passed third-party DFT testing first try.”

Jun Y.

Downtown Toronto, Toronto

General ContractorCommercialIntumescent Steel Fireproofing

“Outstanding thin-film intumescent application on exposed steel columns in a retail space. The architects wanted the steel visible, so cementitious was out. They did a marvelous job, primer and topcoat were perfectly applied.”

Linh N.

Mississauga, ON

BuilderCommercialIntumescent Fire Protection

“They applied intumescent coating on exposed timber beams in a heritage building restoration. Achieved code fire rating while preserving the historical wooden structure. Excellent workmanship, clean and professional.”

Jin S.

The Annex, Toronto

General ContractorCommercialAESS Fireproofing

“Excellent intumescent application for exposed structural steel in a commercial office. They verified dry film thickness (DFT) meticulously and provided complete documentation for the fire marshal. Passed inspection.”

Min-Ji K.

Vaughan, ON

Project ManagerCommercialIntumescent Steel Coating

“They sealed our crawl space with closed-cell spray foam. The damp, musty smell in our home is completely gone. They did an excellent job with prep work, covering everything in plastic and tarps.”

Robert M.

Brampton, ON

HomeownerResidentialCrawl Space Encapsulation

“Upgraded our drafty attic with closed-cell spray foam. The crew was very polite, laying drop cloths throughout the house. Energy bills dropped by almost $110/month. The foam has already paid for itself.”

Linda W.

The Danforth, Toronto

HomeownerResidentialAttic Spray Foam

“Reliable insulation contractors are hard to find. These guys are CCMC certified, fully insured, and use top-tier materials. We use them for all our residential framing projects. Flawless work every single time.”

Mark S.

Brampton, ON

General ContractorResidentialBasement Spray Foam

“They sealed the drafty rim joists in our basement. We noticed an immediate difference in comfort on the main floor. Quick, professional service, and very reasonable pricing. WSIB insured and certified crew.”

John D.

Mississauga, ON

HomeownerResidentialRim Joist Sealing

“We hired them to insulate a large steel commercial building. The closed-cell spray foam bonds perfectly to metal panels, stopping rust and drafts. Excellent WSIB-compliant, licensed crew.”

Fatima Z.

Markham, ON

Project ManagerCommercialMetal Building Insulation

“They sprayed our large farm workshop and barn walls. Condensation was ruining our equipment. Now the barn is draft-free and dry. Great commercial rates and top quality. Highly recommended.”

Vikram M.

Barrie, ON

Project ManagerCommercialAgricultural Spray Foam

“We use their commercial services for all our industrial buildings. Their rigs are top-of-the-line, and their installers are Caliber Certified (CAN/ULC-S705.2 licensed). Passed building inspections first try.”

Rohan D.

Hamilton, ON

BuilderCommercialCommercial Spray Foam

“Insulated a commercial property crawl space to stop drafts rising into offices. Polyurethane closed-cell foam was applied flawlessly. Punctual crew, WSIB insured, $5M liability coverage. Highly recommended.”

Tariq H.

Oakville, ON

Property ManagerCommercialCommercial Crawl Space

“Professional flat roof restoration. Seamless foam and silicone coating has stopped all leaks and significantly improved the building insulation. Professional, licensed team, and competitive pricing.”

Hao T.

Markham, ON

Property ManagerCommercialFlat Roof Restoration

“Great flat roof coating service. They performed a thermal scan to locate wet insulation, replaced those sections, and coated the roof with reflective silicone. 100% leak-proof and energy efficient.”

Raymond C.

Oakville, ON

Facilities DirectorCommercialSilicone Roof Coating

“Insulated and waterproofed our industrial plaza flat roof. Seamless high-density foam stops drafts and water leaks in one shot. Certified installers using CCMC-approved roofing systems.”

Kevin C.

Hamilton, ON

Project ManagerCommercialFlat Roof Spray Foam

“Professional, certified crews. They did a marvelous job applying silicone coating on our warehouse flat roof. Complete ponding water resistance and 20-year durability. Excellent work.”

Steven B.

Barrie, ON

Facilities DirectorCommercialRoof Silicone Coating

“Ontario Building Code requires a thermal barrier over exposed basement spray foam. Their DC315 application was fast and certified. They provided the CCMC evaluation report immediately for our permit file.”

Cynthia O.

Markham, ON

BuilderResidentialThermal Barrier Code Compliance

“They applied DC315 fire coating over exposed spray foam in an attic storage area. Passed building code inspection first try. Certified applicator, WSIB insured, and same-week scheduling. Excellent.”

Ryan S.

Oakville, ON

General ContractorCommercialDC315 Fire Coating

“We hire them for all our legal duplex conversions. They spray the closed-cell insulation and follow up with DC315 intumescent coating for code-compliant fire safety. Fast, neat, and highly professional.”

Kathleen D.

Hamilton, ON

BuilderResidentialSpray Foam & Fire Coating

“Excellent experience. Certified DC315 application over foam in a commercial mechanical loft. Passed inspection easily. They provided a full documentation package with CCMC evaluation reports.”

Justin F.

Barrie, ON

General ContractorCommercialDC315 Thermal Barrier

“Hired them to reline our potable water reservoir. They applied NSF-61 certified polyurea coating. Perfect seamless lining, fast cure, and tank was back in service within 24 hours. Full compliance documents.”

Benjamin B.

Barrie, ON

Facilities DirectorIndustrialPotable Water Tank Lining

“They applied polyurea protective coatings to our heavy haul truck beds and ore chutes. The impact and abrasion resistance is incredible. Sudbury mines present severe conditions, and this coating doubled our equipment life.”

Katherine D.

Sudbury, ON

Project ManagerIndustrialMining Fleet Protection

“Protected our municipal salt spreader trucks with polyurea lining. Complete rust prevention against road salt. Prompt, professional service, and very reasonable rates. Highly recommended.”

Patrick V.

Kitchener, ON

Project ManagerIndustrialIndustrial Fleet Coating

“Excellent potable water tank relining. They applied NSF 61 approved polyurea lining on concrete basins. Complete leak sealing, seamless, and cured in seconds. Outstanding certified crew.”

Nicole M.

Vaughan, ON

Facilities DirectorCommercialWater Treatment Tank Lining

“Professional SFRM fireproofing contractor. They sprayed structural steel beams to meet 2-hour rating requirements. They provided complete technical documents and W/D ratio thickness charts for local inspectors.”

Yasmin R.

Markham, ON

General ContractorCommercialCommercial Fireproofing

“Sprayed cementitious fireproofing on steel deck and joists for our school project. Outstanding team, certified fireproofing crews, WSIB insured. They completed the work on schedule, passing inspection easily.”

Sanjay G.

Oakville, ON

BuilderCommercialStructural Steel Fireproofing

“Reliable commercial fireproofing contractor. Applied cementitious spray on structural steel beams in our new retail development. Excellent price, fast application, and zero scheduling delays.”

Anjali V.

Hamilton, ON

Project ManagerCommercialCementitious Fireproofing

“We needed medium-density cementitious fireproofing for a semi-exposed commercial parking deck. They applied the Monokote SFRM flawlessly. Passed thickness inspection first try. Outstanding crew.”

Chen W.

Barrie, ON

General ContractorCommercialParking Garage Fireproofing

“Hired them to apply intumescent fireproofing on steel structural columns in a new restaurant. Smooth finish, CAN/ULC-S101 compliant, and completed on schedule. Great contractor and pricing.”

Hao T.

Brampton, ON

BuilderCommercialThin-Film Intumescent

“Professional intumescent coating application on steel framing. Architects specified exposed steel look. This thin-film coating expanded perfectly in fire testing. Certified crews, WSIB insured, $5M liability.”

Raymond C.

Markham, ON

General ContractorCommercialAESS Fire Protection

“We needed a 1-hour fire rating on exposed structural steel columns. They applied thin-film water-based intumescent. Excellent smooth paint-like finish, on schedule, and zero issues with building code inspector.”

Kevin C.

Oakville, ON

Project ManagerCommercialIntumescent Fireproofing

“Great thin-film intumescent coating service. They worked weekends to prevent disrupting our ongoing commercial tenant operations. The finish looks spectacular and meets building code. Highly recommended.”

Raymond K.

Hamilton, ON

BuilderCommercialIntumescent Steel Coating

“Our cathedral ceilings were a major source of heat loss. The crew sprayed closed-cell foam between the rafters. Professional prep work, no overspray, and the home feels so much more comfortable.”

Jennifer C.

Oakville, ON

HomeownerResidentialCathedral Ceiling Insulation

“We had old fiberglass batts removed from our basement walls and replaced with closed-cell spray foam. Excellent moisture barrier, no more damp concrete smell. The team was fast, completing the work in hours.”

William B.

Hamilton, ON

HomeownerResidentialBasement Spray Foam

“Upgraded our attic to R-60 using high-performance closed-cell spray foam insulation. The estimator explained everything clearly, and the installers were punctual, clean, and highly professional.”

Elizabeth H.

Barrie, ON

HomeownerResidentialAttic Spray Foam Upgrade

“Excellent contractor partner. They sprayed three custom new builds for us this winter. High quality, uniform thickness, and clean studs. Passed building code inspections on the first walkthrough.”

Thomas P.

Kitchener, ON

BuilderResidentialNew Construction Spray Foam

“Professional warehouse insulation project. They covered all our stock with plastic sheeting before spraying. Clean, code-compliant, and on-schedule. Our HVAC energy bills dropped by 35%.”

Yasmin R.

Pickering, ON

Facilities DirectorCommercialWarehouse Insulation

“Hired them to fix condensation in an industrial steel warehouse. Closed-cell spray foam solved the problem completely and added structural rigidity to the metal siding. Outstanding service.”

Sanjay G.

Kitchener, ON

General ContractorCommercialMetal Building Insulation

“Insulated four exterior industrial storage tanks using CCMC-approved closed-cell polyurethane foam. The thermal performance is exceptional. Safe mobilization, certified crews, and zero safety issues.”

Anjali V.

London, ON

Facilities DirectorCommercialSilo & Tank Insulation

“We needed custom shipping containers insulated for mobile office use. They sprayed 2 inches of closed-cell foam on the interior walls. No condensation, perfectly flat finish. Passed inspection easily.”

Chen W.

Toronto Port, Toronto

Project ManagerCommercialShipping Container Insulation

“We have used them for two flat roof restorations now. High-density spray foam followed by white reflective silicone. Tenants reported immediate comfort improvements. No leaks, highly recommended.”

Deborah D.

Oshawa, ON

Property ManagerCommercialCommercial Roof Restoration

“Restored our retail store flat roof without interrupting business. Seamless spray foam and silicone coating has survived two harsh winters with zero issues. Great warranties and WSIB insured.”

Edward M.

Kitchener, ON

Facilities DirectorCommercialFlat Roof Restoration

“Excellent roof restoration service. Thermal scan was done first to ensure no wet insulation was covered. The silicone coating application was very clean with no overspray on surrounding cars.”

Stephanie L.

London, ON

Project ManagerCommercialSilicone Roof Coating

“High-density polyurethane foam and reflective coating applied on our manufacturing facility roof. Lowered our cooling costs by 20% last summer. Excellent service, clean, and highly professional.”

Ronald K.

Vaughan, ON

Facilities DirectorCommercialFlat Roof Spray Foam

“We needed a 15-minute thermal barrier in an unfinished basement remodel. They sprayed the closed-cell foam and followed up with code-compliant DC315 fire coating. Passed building permit inspection.”

Amy W.

Kitchener, ON

BuilderResidentialDuplex Code Compliance

“Certified intumescent fire paint over spray foam. The application was clean with no overspray on steel beams or electrical runs. The crew was professional, polite, and fully WSIB insured.”

Brandon H.

London, ON

General ContractorCommercialDC315 Fire Coating

“Passed our building inspection with flying colors. The DC315 application met the 15-minute thermal barrier requirements under the Ontario building code. Highly professional service and documentation.”

Shirley A.

Oshawa, ON

General ContractorCommercialExposed Foam Fire Code

“Excellent duplex conversion project. They applied closed-cell spray foam and DC315 fire coating in the mechanical room. Outstanding coordination, clean work, and complete code compliance.”

Frank T.

East York, Toronto

BuilderResidentialDC315 Thermal Barrier

“Relined chemical process tanks with industrial chemical-resistant polyurea. Excellent adhesion to structural steel. Crews worked safe, adhering to all confined space regulations. Flawless work.”

Jack O.

Brampton, ON

Facilities DirectorIndustrialChemical Tank Relining

“They applied polyurea lining on a mining tailings reservoir tank. Superior abrasion and impact resistance. Excellent professional team, WSIB insured, and completed on schedule. Very satisfied.”

Samantha S.

Sudbury, ON

Project ManagerIndustrialTailings Tank Coating

“Relined fermentation tanks using food-grade polyurea coating. Perfect seamless hygienic surface. Crews were clean, wearing full PPE, and finished the project in 2 days. Great results.”

Dennis H.

Downtown Toronto, Toronto

Project ManagerIndustrialBrewery Tank Lining

“Rehabilitated leaking municipal manholes with polyurea lining. Monolithic seal stops water infiltration and resists hydrogen sulfide. Fast cure, returned to service the same day. Great job.”

Amit P.

Markham, ON

Municipal EngineerIndustrialManhole Rehabilitation

“Great experience. They sprayed structural steel columns on our new commercial warehouse. The application thickness met all building code requirements. Highly professional, certified crews.”

Mei L.

Whitby, ON

BuilderCommercialCommercial Fireproofing

“Hired them to fireproof steel framing in a commercial office. They applied cementitious spray to exact specification and cleaned up every scrap of overspray. Passed inspections without issues.”

Wei Z.

Kitchener, ON

Project ManagerCommercialStructural Steel Fireproofing

“Highly professional SFRM application. They worked around our other trades to fireproof structural columns on schedule. Clean work, CCMC approved materials, WSIB insured. Will use again.”

Ying H.

London, ON

General ContractorCommercialCementitious Fireproofing

“They applied intumescent fire paint on exposed structural steel columns in a new school library. Smooth AESS finish, WSIB insured, same-week scheduling. Excellent coordination with our drywallers.”

Brenda C.

Barrie, ON

General ContractorCommercialIntumescent Fire Protection

“Professional thin-film intumescent application on exposed steel rafters. Excellent dry film thickness (DFT) reports provided. Passed building inspections first try. Best fireproofing contractor.”

Samuel G.

Pickering, ON

BuilderCommercialAESS Fireproofing

“They sprayed thin-film intumescent over steel framing in our commercial renovation. Cured quickly and was ready for topcoat in 24 hours. Certified crews, outstanding workmanship and pricing.”

Pamela R.

Kitchener, ON

General ContractorCommercialIntumescent Steel Coating

“Insulated and fireproofed historical timber beams in a heritage loft conversion. Thin-film intumescent kept the wood visible while meeting the 1-hour fire safety code. Outstanding workmanship.”

Benjamin B.

London, ON

BuilderCommercialHeritage Fire Protection

“Used open-cell spray foam to soundproof between the main floor and our new basement suite. Massive reduction in footstep noise. The team was extremely polite and kept the dust to an absolute minimum.”

Jessica G.

London, ON

HomeownerResidentialSoundproofing between Floors

“Insulated our post-war bungalow attic and basement. The original fiberglass was moldy and compressed. The closed-cell foam solved our mold concerns and keeps the house warm. Very professional team.”

Richard F.

Whitby, ON

HomeownerResidentialBungalow Insulation Upgrade

“Excellent experience. Crawl space walls were insulated with 2lb closed-cell foam. Our floors above are finally warm, and we no longer hear the furnace running constantly. Great pricing and certified crews.”

Karen J.

Oakville, ON

HomeownerResidentialCrawl Space Encapsulation

“We hire them regularly for our home addition projects. They execute site protection flawlessly—taping all windows, doors, and flooring before spraying. Their cleanup is thorough, leaving the job site spotless.”

Joseph N.

High Park, Toronto

Project ManagerResidentialResidential Spray Foam

“Hired them to insulate a multi-story apartment building renovation. Spanning five floors, they completed the wall and floor assemblies on schedule. Professional, fully insured, and CCMC certified.”

Mei L.

Mississauga, ON

Property ManagerCommercialMulti-Unit Residential Insulation

“Excellent commercial insulation partner. We use them for all our steel-frame developments. Their high-output mobile rigs are fast, and the foam thickness is highly consistent. Excellent rates.”

Wei Z.

Vaughan, ON

General ContractorCommercialCommercial Spray Foam

“They insulated our older commercial warehouse ceiling. Closed-cell spray foam sealed all the deck joints and stopped winter drafts. We noticed a major reduction in gas bills.”

Ying H.

Brampton, ON

Facilities DirectorCommercialWarehouse Retrofit

“Professional fire barrier application. They applied DC315 over exposed polyurethane spray foam. Certified thickness, verified WFT, and flawless documentation for our project engineers.”

Angela E.

Mississauga, ON

General ContractorCommercialDC315 Fire Coating

“Certified DC315 applicator. They sprayed our custom home crawl space foam and protected the space with ignition barrier coating. Neat, prompt, and completely compliant with local building codes.”

Gregory M.

Vaughan, ON

BuilderResidentialSpray Foam & Fire Paint

“They did a fantastic job with DC315 intumescent coating over foam in our commercial kitchen expansion. CCMC approved, passed municipal inspection first try. Professional and clean crews.”

Anna L.

Oakville, ON

General ContractorCommercialDC315 Thermal Barrier

“TSSA secondary containment lining for industrial chemical storage. Monolithic polyurea lining provides excellent chemical protection and bridges concrete cracks. Professional crew and pricing.”

Rajesh S.

Oshawa, ON

Facilities DirectorIndustrialSecondary Containment

“Waterproofed our concrete parking garage columns and deck using CSA S413 compliant traffic membrane. Protects reinforcement steel from chloride and road salt corrosion. Exceptional quality.”

Priya K.

Oakville, ON

Facilities DirectorCommercialParking Deck Waterproofing

“Applied polyurea protection on mining ore chutes and hoppers in Northern Ontario. Outstanding resistance against rock impact and heavy abrasion. Crew completed the mobilization on schedule.”

Muhammad A.

Timmins, ON

Project ManagerIndustrialMining Equipment Protection

“Our basement was freezing and smelled damp. They sprayed closed-cell foam directly on the concrete foundation. The vapor barrier is perfect, and our heating bills dropped immediately. Outstanding crew.”

Nancy O.

Mississauga, ON

HomeownerResidentialBasement Spray Foam

“Had severe ice damming issues last winter. They air-sealed and insulated our attic with polyurethane foam. No ice dams this year and the home stays incredibly comfortable. Excellent investment.”

Charles S.

Barrie, ON

HomeownerResidentialAttic Spray Foam

“Our cold room was constantly sweating and growing mold. They sprayed closed-cell insulation over the walls and ceiling. Completely fixed the condensation issue. Prompt, clean, and reasonably priced.”

Lisa D.

Scarborough, Toronto

HomeownerResidentialCold Room Insulation

“Best spray foam company in the GTA. They handle all our luxury custom home projects. Their Caliber Certified installers are licensed, WSIB insured, and spray with extreme precision. Never had a building code delay.”

Matthew B.

Kleinburg, ON

BuilderResidentialCustom Home Insulation

“Sprayed the garage ceiling to stop the draft coming into our guest bedroom above. The difference was immediate. Professional crew, arrived right at 7:30 AM, protected my driveway and cleaned up thoroughly.”

Sandra K.

Markham, ON

HomeownerResidentialGarage Ceiling Spray Foam

“They insulated our new two-story home addition. We chose closed-cell spray foam for maximum R-value in the 2x6 walls. The house is airtight and very comfortable. Great communication and fair price.”

Christopher V.

Oshawa, ON

HomeownerResidentialHome Addition Spray Foam

“Very professional. They removed our old dirty insulation and sprayed closed-cell foam to full R-60 code compliance. Transparent pricing and immediate thermal comfort across the entire upper floor.”

Ashley H.

London, ON

HomeownerResidentialAttic R-60 Insulation

“Highly satisfied with the closed-cell spray foam on our basement masonry walls. Passed inspection without issues. Installers were polite, worked fast, and cleaned up every piece of scrap foam.”

Daniel M.

Hamilton, ON

HomeownerResidentialBasement Spray Foam

“Outstanding service! They covered the walls and carpet with plastic sheeting before spraying the attic. The crew was fast and very professional. House is much quieter and warmer now.”

Dorothy P.

Kitchener, ON

HomeownerResidentialAttic Spray Foam

“We partner with Sprayfoam Solutions for all our home renovations. Their certified crews are CAN/ULC-S705.2 licensed and WSIB insured. Pricing is competitive and quality is top-notch.”

Paul T.

Vaughan, ON

General ContractorResidentialResidential Insulation

“The crawl space was a freezing, damp mess. They encapsulated it using closed-cell spray foam. The floor is warm and dry now. Friendly sales team and hard-working installers.”

Donna L.

Barrie, ON

HomeownerResidentialCrawl Space Insulation

“Great experience. They air-sealed the basement rim joists. The drafts on the main floor stopped immediately. The crew arrived on schedule and cleaned up thoroughly. Highly recommended.”

Mark A.

Etobicoke, Toronto

HomeownerResidentialRim Joist Sealing

“They did a superb job insulating our vaulted ceilings. Hard to reach areas were sprayed perfectly. They protected our hardwood floors and furniture with thick plastic. Zero complaints.”

Carol E.

Oakville, ON

HomeownerResidentialAttic Spray Foam

“Insulated our brand new garden suite. We needed maximum R-value in narrow walls, so we used 2lb closed-cell foam. Excellent air sealing and moisture control. Passed inspection first try.”

Donald G.

Leslieville, Toronto

HomeownerResidentialLaneway Suite Insulation

“Our basement is finally usable! The closed-cell spray foam creates an airtight barrier that keeps the space warm and dry. Excellent service from a fully insured, WSIB-compliant company.”

Michelle F.

Mississauga, ON

HomeownerResidentialBasement Insulation

“We hire them for all our high-end residential builds. Their crews are clean, precise, and fast. The foam passes municipal inspections every time. Outstanding service and scheduling.”

George H.

Markham, ON

BuilderResidentialCustom Home Spray Foam

“Wonderful service. They upgraded our old attic assembly to R-60 with closed-cell spray foam and applied our $250 estimate credit right on the quote. The installers were very clean, laying plastic over everything.”

Amanda C.

Ajax, ON

HomeownerResidentialAttic Upgrades

“We insulated the walls of our old drafty home. Closed-cell spray foam has completely transformed the comfort of the house. Our heating bills dropped by $90 a month. Excellent job.”

Kenneth R.

London, ON

HomeownerResidentialBungalow Retrofit

“The crew was punctual and highly professional. They masked off our basement windows and doors with plastic before spraying closed-cell foam on the concrete. Spotless cleanup. Thank you!”

Melissa W.

Kitchener, ON

HomeownerResidentialBasement Insulation

“Had our entire basement insulated with closed-cell spray foam before finishing. The crew showed up on time, protected everything with plastic sheeting, and were done in one day. Basement stays warm now even in January. Highly recommend.”

Michael R.

Toronto, ON

HomeownerResidentialBasement Spray Foam

“We hired Sprayfoam Solutions for our century home renovation. They sprayed the attic to hit R-60 compliance—the difference in heating costs is night and day. Professional team, fair pricing, and they cleaned up after themselves.”

Sarah T.

The Annex, Toronto

HomeownerResidentialAttic Spray Foam

“Used them to spray the garage ceiling below our master bedroom. No more freezing floors in winter. The 2lb closed-cell foam stopped all cold drafts. Fast scheduling and very clean execution.”

David K.

Toronto, ON

HomeownerResidentialGarage Ceiling Spray Foam

“As a custom home builder, I need sub-trades that show up on time and respect the schedule. Their certified crew sprayed the entire building envelope. Passed framing inspection first try with zero trimming delays.”

James L.

Woodbridge, ON

BuilderResidentialNew Construction Spray Foam

“We had 20,000 sq ft of our logistics warehouse insulated with closed-cell spray foam. The building condensation is completely gone. Their commercial rig handled the project in just three days without interrupting our daily operations.”

Amit P.

Mississauga, ON

Facilities DirectorCommercialWarehouse Insulation

“They insulated a retail commercial building envelope for us. High-performance closed-cell foam acted as both insulation and vapor barrier. Excellent scheduling and pass on code inspection. Highly professional.”

Rajesh S.

Etobicoke, Toronto

General ContractorCommercialCommercial Spray Foam

“Used them for a multi-unit commercial project. They applied closed-cell spray foam on metal stud walls. Passed building code on the first inspection. Clean framing and no overspray. Excellent partner.”

Priya K.

Vaughan, ON

BuilderCommercialOffice Building Insulation

“Critical temperature control was required for our food distribution warehouse. They sprayed closed-cell foam on the ceiling and walls. Amazing condensation control and thermal barrier. Professional commercial crew.”

Muhammad A.

Brampton, ON

Facilities DirectorCommercialCold Storage Spray Foam

“Hired Sprayfoam Solutions to restore our warehouse roof using a hybrid flat roof spray foam and silicone roof coating. No tear-off was required, saving us over $40,000 compared to a traditional roof replacement. The roof is 100% waterproof and reflects heat perfectly.”

Jun Y.

North York, Toronto

Facilities DirectorCommercialFlat Roof Spray Foam & Coating

“Our commercial flat roof was constantly leaking. They applied high-density spray foam and a high-solids silicone coating. It created a seamless, ponding-water resistant membrane. The project was completed on budget with zero downtime for our tenants.”

Linh N.

Mississauga, ON

Property ManagerCommercialFlat Roof Restoration

“Saved our commercial roof without a costly tear-off. They repaired the leaks and applied a reflective silicone coating. Rooftop temperatures dropped significantly, lowering our summer AC costs. Excellent service.”

Jin S.

Vaughan, ON

Facilities DirectorCommercialSilicone Roof Coating

“Outstanding roof restoration project. They applied 3lb high-density spray foam directly over our old membrane. Sealed every roof penetration perfectly. Excellent certified crew, WSIB insured.”

Min-Ji K.

Brampton, ON

Project ManagerCommercialCommercial Flat Roof

“We needed a certified 15-minute thermal barrier for a large commercial permit. Their DC315 application was flawlessly done, meeting all Building Code compliance standards on the first inspection. They provided full wet film thickness documentation.”

Rebecca P.

Scarborough, Toronto

General ContractorCommercialDC315 Fire Coating

“Highest rated fireproofing team in the GTA. They arrived within 48 hours for a CAN/ULC-S124 compliant intumescent coating project in a basement suite. The documentation provided was exactly what the inspector needed.”

Anthony G.

Mississauga, ON

General ContractorResidentialSpray Foam & DC315

“We use Sprayfoam Solutions for all our exposed spray foam projects. They apply the closed-cell foam and the DC315 fire coating on the same day—one crew, one mobilization. Saves time and framing stays clean.”

Laura J.

Vaughan, ON

BuilderResidentialDC315 Thermal Barrier

“Highly professional DC315 intumescent coating application on exposed spray foam in our mechanical rooms. The crew verified wet film thickness (WFT) continuously and left a spotless workspace. Passed inspection.”

Albert N.

Brampton, ON

Project ManagerCommercialDC315 Fire Coating

“We hired Sprayfoam Solutions to apply a polyurea secondary containment lining for our municipal wastewater infrastructure. The coating cured in seconds and was return-to-service within 24 hours. Flawless crack-bridging and chemical resistance. Passed TSSA compliance inspections.”

Raymond K.

Hamilton, ON

Municipal EngineerIndustrialSecondary Containment Lining

“They waterproofed our commercial parking deck using a traffic-bearing polyurea membrane. It has held up perfectly against road salt and winter snowplows. Zero leaks reported. Certified applicator, $5M liability.”

Brenda C.

North York, Toronto

Facilities DirectorCommercialParking Deck Waterproofing

“Outstanding industrial polyurea application. We needed chemical containment lining for our fuel storage tanks. Monolithic membrane has zero seams and fits TSSA 110% capacity guidelines. High-end workmanship.”

Samuel G.

Mississauga, ON

Project ManagerIndustrialChemical Containment Coating

“Rehabilitated our concrete sewage digester tanks using polyurea coating. It protects the concrete from harsh hydrogen sulfide corrosion. Mobile rigs handled the project perfectly. Excellent municipal partner.”

Pamela R.

London, ON

Municipal EngineerIndustrialWastewater Infrastructure Lining

“Hired them to apply cementitious fireproofing on the structural steel beams of a new commercial parking garage. Professional spray application of SFRM to code thickness. Passed third-party inspections first try with zero thickness issues.”

Fatima Z.

York, Toronto

General ContractorCommercialCementitious Fireproofing

“Excellent structural steel fireproofing service. They sprayed low-density cementitious material on the metal deck and columns. Crew worked safe at heights, fully WSIB compliant, and completed the job on schedule.”

Vikram M.

Mississauga, ON

BuilderCommercialCementitious Fireproofing

“We hire them for all our mid-rise commercial steel projects. Their crews apply cementitious fire resistive material (SFRM) to exact building code thickness. Prompt service, great prices, and fully insured.”

Rohan D.

Vaughan, ON

Project ManagerCommercialStructural Steel Fireproofing

“Passed our building inspection. They applied cementitious fire protection on steel columns in our new industrial building. Professional prep, excellent density control, and spotless cleanup. Great contractor.”

Tariq H.

Brampton, ON

BuilderCommercialCementitious Fireproofing

“We hired Sprayfoam Solutions to apply thin-film intumescent fire coating on architecturally exposed structural steel (AESS) beams in our new corporate headquarters lobby. The finish is incredibly smooth and looks like paint, yet provides a certified 2-hour fire rating. Passed third-party DFT testing first try.”

Jun Y.

Downtown Toronto, Toronto

General ContractorCommercialIntumescent Steel Fireproofing

“Outstanding thin-film intumescent application on exposed steel columns in a retail space. The architects wanted the steel visible, so cementitious was out. They did a marvelous job, primer and topcoat were perfectly applied.”

Linh N.

Mississauga, ON

BuilderCommercialIntumescent Fire Protection

“They applied intumescent coating on exposed timber beams in a heritage building restoration. Achieved code fire rating while preserving the historical wooden structure. Excellent workmanship, clean and professional.”

Jin S.

The Annex, Toronto

General ContractorCommercialAESS Fireproofing

“Excellent intumescent application for exposed structural steel in a commercial office. They verified dry film thickness (DFT) meticulously and provided complete documentation for the fire marshal. Passed inspection.”

Min-Ji K.

Vaughan, ON

Project ManagerCommercialIntumescent Steel Coating

“They sealed our crawl space with closed-cell spray foam. The damp, musty smell in our home is completely gone. They did an excellent job with prep work, covering everything in plastic and tarps.”

Robert M.

Brampton, ON

HomeownerResidentialCrawl Space Encapsulation

“Upgraded our drafty attic with closed-cell spray foam. The crew was very polite, laying drop cloths throughout the house. Energy bills dropped by almost $110/month. The foam has already paid for itself.”

Linda W.

The Danforth, Toronto

HomeownerResidentialAttic Spray Foam

“Reliable insulation contractors are hard to find. These guys are CCMC certified, fully insured, and use top-tier materials. We use them for all our residential framing projects. Flawless work every single time.”

Mark S.

Brampton, ON

General ContractorResidentialBasement Spray Foam

“They sealed the drafty rim joists in our basement. We noticed an immediate difference in comfort on the main floor. Quick, professional service, and very reasonable pricing. WSIB insured and certified crew.”

John D.

Mississauga, ON

HomeownerResidentialRim Joist Sealing

“We hired them to insulate a large steel commercial building. The closed-cell spray foam bonds perfectly to metal panels, stopping rust and drafts. Excellent WSIB-compliant, licensed crew.”

Fatima Z.

Markham, ON

Project ManagerCommercialMetal Building Insulation

“They sprayed our large farm workshop and barn walls. Condensation was ruining our equipment. Now the barn is draft-free and dry. Great commercial rates and top quality. Highly recommended.”

Vikram M.

Barrie, ON

Project ManagerCommercialAgricultural Spray Foam

“We use their commercial services for all our industrial buildings. Their rigs are top-of-the-line, and their installers are Caliber Certified (CAN/ULC-S705.2 licensed). Passed building inspections first try.”

Rohan D.

Hamilton, ON

BuilderCommercialCommercial Spray Foam

“Insulated a commercial property crawl space to stop drafts rising into offices. Polyurethane closed-cell foam was applied flawlessly. Punctual crew, WSIB insured, $5M liability coverage. Highly recommended.”

Tariq H.

Oakville, ON

Property ManagerCommercialCommercial Crawl Space

“Professional flat roof restoration. Seamless foam and silicone coating has stopped all leaks and significantly improved the building insulation. Professional, licensed team, and competitive pricing.”

Hao T.

Markham, ON

Property ManagerCommercialFlat Roof Restoration

“Great flat roof coating service. They performed a thermal scan to locate wet insulation, replaced those sections, and coated the roof with reflective silicone. 100% leak-proof and energy efficient.”

Raymond C.

Oakville, ON

Facilities DirectorCommercialSilicone Roof Coating

“Insulated and waterproofed our industrial plaza flat roof. Seamless high-density foam stops drafts and water leaks in one shot. Certified installers using CCMC-approved roofing systems.”

Kevin C.

Hamilton, ON

Project ManagerCommercialFlat Roof Spray Foam

“Professional, certified crews. They did a marvelous job applying silicone coating on our warehouse flat roof. Complete ponding water resistance and 20-year durability. Excellent work.”

Steven B.

Barrie, ON

Facilities DirectorCommercialRoof Silicone Coating

“Ontario Building Code requires a thermal barrier over exposed basement spray foam. Their DC315 application was fast and certified. They provided the CCMC evaluation report immediately for our permit file.”

Cynthia O.

Markham, ON

BuilderResidentialThermal Barrier Code Compliance

“They applied DC315 fire coating over exposed spray foam in an attic storage area. Passed building code inspection first try. Certified applicator, WSIB insured, and same-week scheduling. Excellent.”

Ryan S.

Oakville, ON

General ContractorCommercialDC315 Fire Coating

“We hire them for all our legal duplex conversions. They spray the closed-cell insulation and follow up with DC315 intumescent coating for code-compliant fire safety. Fast, neat, and highly professional.”

Kathleen D.

Hamilton, ON

BuilderResidentialSpray Foam & Fire Coating

“Excellent experience. Certified DC315 application over foam in a commercial mechanical loft. Passed inspection easily. They provided a full documentation package with CCMC evaluation reports.”

Justin F.

Barrie, ON

General ContractorCommercialDC315 Thermal Barrier

“Hired them to reline our potable water reservoir. They applied NSF-61 certified polyurea coating. Perfect seamless lining, fast cure, and tank was back in service within 24 hours. Full compliance documents.”

Benjamin B.

Barrie, ON

Facilities DirectorIndustrialPotable Water Tank Lining

“They applied polyurea protective coatings to our heavy haul truck beds and ore chutes. The impact and abrasion resistance is incredible. Sudbury mines present severe conditions, and this coating doubled our equipment life.”

Katherine D.

Sudbury, ON

Project ManagerIndustrialMining Fleet Protection

“Protected our municipal salt spreader trucks with polyurea lining. Complete rust prevention against road salt. Prompt, professional service, and very reasonable rates. Highly recommended.”

Patrick V.

Kitchener, ON

Project ManagerIndustrialIndustrial Fleet Coating

“Excellent potable water tank relining. They applied NSF 61 approved polyurea lining on concrete basins. Complete leak sealing, seamless, and cured in seconds. Outstanding certified crew.”

Nicole M.

Vaughan, ON

Facilities DirectorCommercialWater Treatment Tank Lining

“Professional SFRM fireproofing contractor. They sprayed structural steel beams to meet 2-hour rating requirements. They provided complete technical documents and W/D ratio thickness charts for local inspectors.”

Yasmin R.

Markham, ON

General ContractorCommercialCommercial Fireproofing

“Sprayed cementitious fireproofing on steel deck and joists for our school project. Outstanding team, certified fireproofing crews, WSIB insured. They completed the work on schedule, passing inspection easily.”

Sanjay G.

Oakville, ON

BuilderCommercialStructural Steel Fireproofing

“Reliable commercial fireproofing contractor. Applied cementitious spray on structural steel beams in our new retail development. Excellent price, fast application, and zero scheduling delays.”

Anjali V.

Hamilton, ON

Project ManagerCommercialCementitious Fireproofing

“We needed medium-density cementitious fireproofing for a semi-exposed commercial parking deck. They applied the Monokote SFRM flawlessly. Passed thickness inspection first try. Outstanding crew.”

Chen W.

Barrie, ON

General ContractorCommercialParking Garage Fireproofing

“Hired them to apply intumescent fireproofing on steel structural columns in a new restaurant. Smooth finish, CAN/ULC-S101 compliant, and completed on schedule. Great contractor and pricing.”

Hao T.

Brampton, ON

BuilderCommercialThin-Film Intumescent

“Professional intumescent coating application on steel framing. Architects specified exposed steel look. This thin-film coating expanded perfectly in fire testing. Certified crews, WSIB insured, $5M liability.”

Raymond C.

Markham, ON

General ContractorCommercialAESS Fire Protection

“We needed a 1-hour fire rating on exposed structural steel columns. They applied thin-film water-based intumescent. Excellent smooth paint-like finish, on schedule, and zero issues with building code inspector.”

Kevin C.

Oakville, ON

Project ManagerCommercialIntumescent Fireproofing

“Great thin-film intumescent coating service. They worked weekends to prevent disrupting our ongoing commercial tenant operations. The finish looks spectacular and meets building code. Highly recommended.”

Raymond K.

Hamilton, ON

BuilderCommercialIntumescent Steel Coating

“Our cathedral ceilings were a major source of heat loss. The crew sprayed closed-cell foam between the rafters. Professional prep work, no overspray, and the home feels so much more comfortable.”

Jennifer C.

Oakville, ON

HomeownerResidentialCathedral Ceiling Insulation

“We had old fiberglass batts removed from our basement walls and replaced with closed-cell spray foam. Excellent moisture barrier, no more damp concrete smell. The team was fast, completing the work in hours.”

William B.

Hamilton, ON

HomeownerResidentialBasement Spray Foam

“Upgraded our attic to R-60 using high-performance closed-cell spray foam insulation. The estimator explained everything clearly, and the installers were punctual, clean, and highly professional.”

Elizabeth H.

Barrie, ON

HomeownerResidentialAttic Spray Foam Upgrade

“Excellent contractor partner. They sprayed three custom new builds for us this winter. High quality, uniform thickness, and clean studs. Passed building code inspections on the first walkthrough.”

Thomas P.

Kitchener, ON

BuilderResidentialNew Construction Spray Foam

“Professional warehouse insulation project. They covered all our stock with plastic sheeting before spraying. Clean, code-compliant, and on-schedule. Our HVAC energy bills dropped by 35%.”

Yasmin R.

Pickering, ON

Facilities DirectorCommercialWarehouse Insulation

“Hired them to fix condensation in an industrial steel warehouse. Closed-cell spray foam solved the problem completely and added structural rigidity to the metal siding. Outstanding service.”

Sanjay G.

Kitchener, ON

General ContractorCommercialMetal Building Insulation

“Insulated four exterior industrial storage tanks using CCMC-approved closed-cell polyurethane foam. The thermal performance is exceptional. Safe mobilization, certified crews, and zero safety issues.”

Anjali V.

London, ON

Facilities DirectorCommercialSilo & Tank Insulation

“We needed custom shipping containers insulated for mobile office use. They sprayed 2 inches of closed-cell foam on the interior walls. No condensation, perfectly flat finish. Passed inspection easily.”

Chen W.

Toronto Port, Toronto

Project ManagerCommercialShipping Container Insulation

“We have used them for two flat roof restorations now. High-density spray foam followed by white reflective silicone. Tenants reported immediate comfort improvements. No leaks, highly recommended.”

Deborah D.

Oshawa, ON

Property ManagerCommercialCommercial Roof Restoration

“Restored our retail store flat roof without interrupting business. Seamless spray foam and silicone coating has survived two harsh winters with zero issues. Great warranties and WSIB insured.”

Edward M.

Kitchener, ON

Facilities DirectorCommercialFlat Roof Restoration

“Excellent roof restoration service. Thermal scan was done first to ensure no wet insulation was covered. The silicone coating application was very clean with no overspray on surrounding cars.”

Stephanie L.

London, ON

Project ManagerCommercialSilicone Roof Coating

“High-density polyurethane foam and reflective coating applied on our manufacturing facility roof. Lowered our cooling costs by 20% last summer. Excellent service, clean, and highly professional.”

Ronald K.

Vaughan, ON

Facilities DirectorCommercialFlat Roof Spray Foam

“We needed a 15-minute thermal barrier in an unfinished basement remodel. They sprayed the closed-cell foam and followed up with code-compliant DC315 fire coating. Passed building permit inspection.”

Amy W.

Kitchener, ON

BuilderResidentialDuplex Code Compliance

“Certified intumescent fire paint over spray foam. The application was clean with no overspray on steel beams or electrical runs. The crew was professional, polite, and fully WSIB insured.”

Brandon H.

London, ON

General ContractorCommercialDC315 Fire Coating

“Passed our building inspection with flying colors. The DC315 application met the 15-minute thermal barrier requirements under the Ontario building code. Highly professional service and documentation.”

Shirley A.

Oshawa, ON

General ContractorCommercialExposed Foam Fire Code

“Excellent duplex conversion project. They applied closed-cell spray foam and DC315 fire coating in the mechanical room. Outstanding coordination, clean work, and complete code compliance.”

Frank T.

East York, Toronto

BuilderResidentialDC315 Thermal Barrier

“Relined chemical process tanks with industrial chemical-resistant polyurea. Excellent adhesion to structural steel. Crews worked safe, adhering to all confined space regulations. Flawless work.”

Jack O.

Brampton, ON

Facilities DirectorIndustrialChemical Tank Relining

“They applied polyurea lining on a mining tailings reservoir tank. Superior abrasion and impact resistance. Excellent professional team, WSIB insured, and completed on schedule. Very satisfied.”

Samantha S.

Sudbury, ON

Project ManagerIndustrialTailings Tank Coating

“Relined fermentation tanks using food-grade polyurea coating. Perfect seamless hygienic surface. Crews were clean, wearing full PPE, and finished the project in 2 days. Great results.”

Dennis H.

Downtown Toronto, Toronto

Project ManagerIndustrialBrewery Tank Lining

“Rehabilitated leaking municipal manholes with polyurea lining. Monolithic seal stops water infiltration and resists hydrogen sulfide. Fast cure, returned to service the same day. Great job.”

Amit P.

Markham, ON

Municipal EngineerIndustrialManhole Rehabilitation

“Great experience. They sprayed structural steel columns on our new commercial warehouse. The application thickness met all building code requirements. Highly professional, certified crews.”

Mei L.

Whitby, ON

BuilderCommercialCommercial Fireproofing

“Hired them to fireproof steel framing in a commercial office. They applied cementitious spray to exact specification and cleaned up every scrap of overspray. Passed inspections without issues.”

Wei Z.

Kitchener, ON

Project ManagerCommercialStructural Steel Fireproofing

“Highly professional SFRM application. They worked around our other trades to fireproof structural columns on schedule. Clean work, CCMC approved materials, WSIB insured. Will use again.”

Ying H.

London, ON

General ContractorCommercialCementitious Fireproofing

“They applied intumescent fire paint on exposed structural steel columns in a new school library. Smooth AESS finish, WSIB insured, same-week scheduling. Excellent coordination with our drywallers.”

Brenda C.

Barrie, ON

General ContractorCommercialIntumescent Fire Protection

“Professional thin-film intumescent application on exposed steel rafters. Excellent dry film thickness (DFT) reports provided. Passed building inspections first try. Best fireproofing contractor.”

Samuel G.

Pickering, ON

BuilderCommercialAESS Fireproofing

“They sprayed thin-film intumescent over steel framing in our commercial renovation. Cured quickly and was ready for topcoat in 24 hours. Certified crews, outstanding workmanship and pricing.”

Pamela R.

Kitchener, ON

General ContractorCommercialIntumescent Steel Coating

“Insulated and fireproofed historical timber beams in a heritage loft conversion. Thin-film intumescent kept the wood visible while meeting the 1-hour fire safety code. Outstanding workmanship.”

Benjamin B.

London, ON

BuilderCommercialHeritage Fire Protection

“Used open-cell spray foam to soundproof between the main floor and our new basement suite. Massive reduction in footstep noise. The team was extremely polite and kept the dust to an absolute minimum.”

Jessica G.

London, ON

HomeownerResidentialSoundproofing between Floors

“Insulated our post-war bungalow attic and basement. The original fiberglass was moldy and compressed. The closed-cell foam solved our mold concerns and keeps the house warm. Very professional team.”

Richard F.

Whitby, ON

HomeownerResidentialBungalow Insulation Upgrade

“Excellent experience. Crawl space walls were insulated with 2lb closed-cell foam. Our floors above are finally warm, and we no longer hear the furnace running constantly. Great pricing and certified crews.”

Karen J.

Oakville, ON

HomeownerResidentialCrawl Space Encapsulation

“We hire them regularly for our home addition projects. They execute site protection flawlessly—taping all windows, doors, and flooring before spraying. Their cleanup is thorough, leaving the job site spotless.”

Joseph N.

High Park, Toronto

Project ManagerResidentialResidential Spray Foam

“Hired them to insulate a multi-story apartment building renovation. Spanning five floors, they completed the wall and floor assemblies on schedule. Professional, fully insured, and CCMC certified.”

Mei L.

Mississauga, ON

Property ManagerCommercialMulti-Unit Residential Insulation

“Excellent commercial insulation partner. We use them for all our steel-frame developments. Their high-output mobile rigs are fast, and the foam thickness is highly consistent. Excellent rates.”

Wei Z.

Vaughan, ON

General ContractorCommercialCommercial Spray Foam

“They insulated our older commercial warehouse ceiling. Closed-cell spray foam sealed all the deck joints and stopped winter drafts. We noticed a major reduction in gas bills.”

Ying H.

Brampton, ON

Facilities DirectorCommercialWarehouse Retrofit

“Professional fire barrier application. They applied DC315 over exposed polyurethane spray foam. Certified thickness, verified WFT, and flawless documentation for our project engineers.”

Angela E.

Mississauga, ON

General ContractorCommercialDC315 Fire Coating

“Certified DC315 applicator. They sprayed our custom home crawl space foam and protected the space with ignition barrier coating. Neat, prompt, and completely compliant with local building codes.”

Gregory M.

Vaughan, ON

BuilderResidentialSpray Foam & Fire Paint

“They did a fantastic job with DC315 intumescent coating over foam in our commercial kitchen expansion. CCMC approved, passed municipal inspection first try. Professional and clean crews.”

Anna L.

Oakville, ON

General ContractorCommercialDC315 Thermal Barrier

“TSSA secondary containment lining for industrial chemical storage. Monolithic polyurea lining provides excellent chemical protection and bridges concrete cracks. Professional crew and pricing.”

Rajesh S.

Oshawa, ON

Facilities DirectorIndustrialSecondary Containment

“Waterproofed our concrete parking garage columns and deck using CSA S413 compliant traffic membrane. Protects reinforcement steel from chloride and road salt corrosion. Exceptional quality.”

Priya K.

Oakville, ON

Facilities DirectorCommercialParking Deck Waterproofing

“Applied polyurea protection on mining ore chutes and hoppers in Northern Ontario. Outstanding resistance against rock impact and heavy abrasion. Crew completed the mobilization on schedule.”

Muhammad A.

Timmins, ON

Project ManagerIndustrialMining Equipment Protection

“Our basement was freezing and smelled damp. They sprayed closed-cell foam directly on the concrete foundation. The vapor barrier is perfect, and our heating bills dropped immediately. Outstanding crew.”

Nancy O.

Mississauga, ON

HomeownerResidentialBasement Spray Foam

“Had severe ice damming issues last winter. They air-sealed and insulated our attic with polyurethane foam. No ice dams this year and the home stays incredibly comfortable. Excellent investment.”

Charles S.

Barrie, ON

HomeownerResidentialAttic Spray Foam

“Our cold room was constantly sweating and growing mold. They sprayed closed-cell insulation over the walls and ceiling. Completely fixed the condensation issue. Prompt, clean, and reasonably priced.”

Lisa D.

Scarborough, Toronto

HomeownerResidentialCold Room Insulation

“Best spray foam company in the GTA. They handle all our luxury custom home projects. Their Caliber Certified installers are licensed, WSIB insured, and spray with extreme precision. Never had a building code delay.”

Matthew B.

Kleinburg, ON

BuilderResidentialCustom Home Insulation

“Sprayed the garage ceiling to stop the draft coming into our guest bedroom above. The difference was immediate. Professional crew, arrived right at 7:30 AM, protected my driveway and cleaned up thoroughly.”

Sandra K.

Markham, ON

HomeownerResidentialGarage Ceiling Spray Foam

“They insulated our new two-story home addition. We chose closed-cell spray foam for maximum R-value in the 2x6 walls. The house is airtight and very comfortable. Great communication and fair price.”

Christopher V.

Oshawa, ON

HomeownerResidentialHome Addition Spray Foam

“Very professional. They removed our old dirty insulation and sprayed closed-cell foam to full R-60 code compliance. Transparent pricing and immediate thermal comfort across the entire upper floor.”

Ashley H.

London, ON

HomeownerResidentialAttic R-60 Insulation

“Highly satisfied with the closed-cell spray foam on our basement masonry walls. Passed inspection without issues. Installers were polite, worked fast, and cleaned up every piece of scrap foam.”

Daniel M.

Hamilton, ON

HomeownerResidentialBasement Spray Foam

“Outstanding service! They covered the walls and carpet with plastic sheeting before spraying the attic. The crew was fast and very professional. House is much quieter and warmer now.”

Dorothy P.

Kitchener, ON

HomeownerResidentialAttic Spray Foam

“We partner with Sprayfoam Solutions for all our home renovations. Their certified crews are CAN/ULC-S705.2 licensed and WSIB insured. Pricing is competitive and quality is top-notch.”

Paul T.

Vaughan, ON

General ContractorResidentialResidential Insulation

“The crawl space was a freezing, damp mess. They encapsulated it using closed-cell spray foam. The floor is warm and dry now. Friendly sales team and hard-working installers.”

Donna L.

Barrie, ON

HomeownerResidentialCrawl Space Insulation

“Great experience. They air-sealed the basement rim joists. The drafts on the main floor stopped immediately. The crew arrived on schedule and cleaned up thoroughly. Highly recommended.”

Mark A.

Etobicoke, Toronto

HomeownerResidentialRim Joist Sealing

“They did a superb job insulating our vaulted ceilings. Hard to reach areas were sprayed perfectly. They protected our hardwood floors and furniture with thick plastic. Zero complaints.”

Carol E.

Oakville, ON

HomeownerResidentialAttic Spray Foam

“Insulated our brand new garden suite. We needed maximum R-value in narrow walls, so we used 2lb closed-cell foam. Excellent air sealing and moisture control. Passed inspection first try.”

Donald G.

Leslieville, Toronto

HomeownerResidentialLaneway Suite Insulation

“Our basement is finally usable! The closed-cell spray foam creates an airtight barrier that keeps the space warm and dry. Excellent service from a fully insured, WSIB-compliant company.”

Michelle F.

Mississauga, ON

HomeownerResidentialBasement Insulation

“We hire them for all our high-end residential builds. Their crews are clean, precise, and fast. The foam passes municipal inspections every time. Outstanding service and scheduling.”

George H.

Markham, ON

BuilderResidentialCustom Home Spray Foam

“Wonderful service. They upgraded our old attic assembly to R-60 with closed-cell spray foam and applied our $250 estimate credit right on the quote. The installers were very clean, laying plastic over everything.”

Amanda C.

Ajax, ON

HomeownerResidentialAttic Upgrades

“We insulated the walls of our old drafty home. Closed-cell spray foam has completely transformed the comfort of the house. Our heating bills dropped by $90 a month. Excellent job.”

Kenneth R.

London, ON

HomeownerResidentialBungalow Retrofit

“The crew was punctual and highly professional. They masked off our basement windows and doors with plastic before spraying closed-cell foam on the concrete. Spotless cleanup. Thank you!”

Melissa W.

Kitchener, ON

HomeownerResidentialBasement Insulation

THE SPRAY FOAM EXPERTS

That Actually Lower Your Energy Bills
★★★★★5.0 Google Rating•55+ Verified Reviews•Serving Across Ontario
STEP 1: 60-SECOND PRICE CHECK
LOCK IN DIRECT CONTRACTOR PRICING

Fast Response & Quotes · No Commitment!

Tap to Select Your Project:
or call directly: 647-333-3626
VERIFIED, CERTIFIED & LISTED ON
Google5.0 ★ Verified
HomeStarsVerified Pro
Houzz ProListed Contractor
TrustedProsCanadian Directory
Caliber CertifiedCAN/ULC-S705.2
WSIB & CCMCOntario Cleared

Proudly Serving Toronto, GTA & All of Ontario

Direct contractor pricing · Caliber Certified (CAN/ULC-S705.2) Installers · $0 Travel Fee Across Ontario

Sprayfoam Solutions service coverage map across Toronto, GTA and Ontario
50+ Cities & Municipalities

With regional mobile crews stationed right near you, we charge $0 travel fees and stand as the best, most trusted contractor to serve your home or commercial building anywhere in Ontario.

WSIB Insured
6,500+ Projects Completed
Get My Price in 60s →

Get Your Free Quote

Takes 10 seconds — we'll call you back.

Free Estimate No Obligation WSIB Cleared Licensed Caliber Certified
Call 647-333-3626 (7AM–9PM)
SERVING ALL ONTARIO:Ajax • Aurora • Barrie • Belleville • Bracebridge • Brampton • Brant • Brantford • Brock • Brockville • Burlington • Caledon • Cambridge • Chatham-Kent • Clarington • Collingwood • Cornwall • East Gwillimbury • Etobicoke • Fort Erie • Gravenhurst • Grimsby • Guelph • Halton Hills • Hamilton • Huntsville • Innisfil • Kawartha Lakes • King • Kingston • Kitchener • Lincoln • London • Markham • Milton • Mississauga • Muskoka • Newmarket • Niagara Falls • North York • Oakville • Orillia • Oshawa • Ottawa • Parry Sound • Pelham • Peterborough • Pickering • Port Colborne • Richmond Hill • Sarnia • Scarborough • Scugog • St. Catharines • St. Thomas • Stratford • Thorold • Toronto • Uxbridge • Vaughan • Wainfleet • Waterloo • Welland • West Lincoln • Whitby • Whitchurch-Stouffville • Windsor • Woodstock•Ajax • Aurora • Barrie • Belleville • Bracebridge • Brampton • Brant • Brantford • Brock • Brockville • Burlington • Caledon • Cambridge • Chatham-Kent • Clarington • Collingwood • Cornwall • East Gwillimbury • Etobicoke • Fort Erie • Gravenhurst • Grimsby • Guelph • Halton Hills • Hamilton • Huntsville • Innisfil • Kawartha Lakes • King • Kingston • Kitchener • Lincoln • London • Markham • Milton • Mississauga • Muskoka • Newmarket • Niagara Falls • North York • Oakville • Orillia • Oshawa • Ottawa • Parry Sound • Pelham • Peterborough • Pickering • Port Colborne • Richmond Hill • Sarnia • Scarborough • Scugog • St. Catharines • St. Thomas • Stratford • Thorold • Toronto • Uxbridge • Vaughan • Wainfleet • Waterloo • Welland • West Lincoln • Whitby • Whitchurch-Stouffville • Windsor • Woodstock

About Sprayfoam Solutions Toronto Inc

6,500+ projects completed since 2008. The Greater Toronto Area's trusted spray foam insulation & fireproofing contractor for commercial builders, general contractors, and homeowners.

647-333-3626Request a Quote
50 Howden Rd, Scarborough, ON M1R 3E4
100% Canadian Owned & OperatedLicensed • Up to $10M Insured • WSIB Clearance

Our Services

  • ›Spray Foam (Residential)
  • ›Spray Foam (Commercial)
  • ›Interior Sound Dampening
  • ›Fire Coating DC315
  • ›Cementitious Fireproofing
  • ›Intumescent Coating

Expert Guides

  • What is Spray Foam Insulation?
  • How Much Does Spray Foam Cost?
  • Our Chemicals & Technical Data
  • Customer Reviews (5.0 ★)
  • View Our Projects
  • Book Free On-Site Inspection

Areas We Serve

  • •Toronto & Central GTA
  • •Mississauga & Peel
  • •Oakville & Halton
  • •Vaughan & York Region
  • •Barrie & Simcoe County
  • •Muskoka & Cottage Country
  • •Waterloo & Tri-Cities
  • •Oshawa & Durham Region
  • + View All 50+ Cities
All project estimates, pricing illustrations, R-value metrics, and building code references on this website are for general informational purposes only and do not constitute a certified estimate or binding offer to contract. Formal written contracts provided by Sprayfoam Solutions Toronto Inc. following an on-site inspection strictly supersede all online representations. Subject to our Terms of Service and Privacy Policy.
AboutView Our WorkCustomer Reviews 5.0 ★CertificationsServicesAreas We ServeBlogContact UsTerms of ServicePrivacy Policy
© 2026 Spray Foam Solutions Toronto Inc. All Rights Reserved.