Commercial SPF flat roof restoration and silicone membrane systems in Ontario cost $5.50 to $9.50 per sq. ft. installed in 2026 ($4.50–$6.50/sq ft for silicone overcoats; $6.50–$11.50/sq ft for full 3 lb SPF + UV silicone assemblies). Our Caliber Certified (CAN/ULC-S705.2 Licensed) Commercial Spray Foam Installers apply CAN/ULC-S705.1 high-density closed-cell foam with zero tear-off and zero facility downtime across Ontario.
Our Canadian Suppliers, Partners, Clients & Credentials
THE SMART CHOICE
The Cost of Poor Roofing vs. Your Long-Term ROI
Traditional roofing membranes degrade and develop seam leaks, risking structural damage and inventory loss. Our monolithic system delivers 25+ years of verified thermal & waterproofing protection, paying for itself in 3–5 years.
BUILDING RISK AUDIT
1. Long-Term Risks & The Sprayfoam Cure
Click any common building issue below to see the solution comparison on the right:
1
Standing ponding water deteriorating seamed membranes and leaking into active warehouse or manufacturing space
CONVENTIONAL ROOFING (Fails in 5-10 yrs)
Tearing off old tar-and-gravel or EPDM roofs costs $100K+ in labor, fills dumpsters with landfill waste, and leaves your building exposed to rain.
THE SPRAYFOAM SOLUTION: No Tear-Off / Zero Waste
SPRAYFOAM ADVANTAGE (Monolithic Barrier)
We prep and spray directly over the existing roof membrane, avoiding demolition costs, landfill taxes, and keeping your facility safe.
2
UV thermal shock splitting conventional roof seams and pitch pans — forcing tear-offs every 15–20 years
3
Insufficient roof R-value falling below Ontario Building Code Division B, Part 12 (SB-10) commercial energy targets
4
Interior roof-deck condensation forming on cold metal flutes and dripping onto inventory, racking, and electronics
5
Exposed interior underside deck foam lacking certified IFTI DC315® thermal barrier protection for Ontario Building Code compliance
6
Full tear-off and re-roofing capital costs ($12–$22+/sq ft) plus weeks of crane disruption and landfill disposal fees
CONVENTIONAL ROOFING (Fails in 5-10 yrs)
Tearing off old tar-and-gravel or EPDM roofs costs $100K+ in labor, fills dumpsters with landfill waste, and leaves your building exposed to rain.
THE SPRAYFOAM SOLUTION: No Tear-Off / Zero Waste
SPRAYFOAM ADVANTAGE (Monolithic Barrier)
We prep and spray directly over the existing roof membrane, avoiding demolition costs, landfill taxes, and keeping your facility safe.
FINANCIAL CASE STUDY
2. Commercial ROI & Long-Term Financial Payback
Verified benchmarks based on a typical 8,000 sqft Flat Roof — Commercial
$72,000 – $120,000
Estimated 20-Year Savings
1 – 5 years
Payback Period
$3,600 – $6,000
Annual Utility Savings
30 – 50%
Energy Cost Reduction
Year 1: InstallInstant 40-60% utility reduction
Years 3-5: BreakevenInvestment fully paid back
Years 6-20+: ProfitHundreds of thousands saved
Applied over existing membrane — no tear-off costs (saves $40K–$80K)
Monolithic Dual-Layer System — Insulation + Waterproofing
Our commercial flat roof restoration applies high-density SPF insulation followed by a premium silicone weather shield directly over your existing roof: one seamless, bonded assembly with zero tear-off required.
DUAL-LAYER SPECIFICATION
Air, Thermal & Waterproof Barrier
Traditional commercial flat roofs rely on miles of glued seams and deck-piercing screws that fail over time. Our dual-layer system eliminates every seam with zero tear-off demolition.
Conventional Seamed Roof (5 Weak Points)
✗ Taped & Glued Seams (Separate under ponding water)
✗ Mechanical Fasteners (Puncture deck & loosen from wind)
✗ Costly Full Tear-Off ($100K+ demolition & dumpster waste)
✗ Vulnerable Flashings (Leaks around HVAC curbs & pipes)
How We Install Your Commercial SPF & Silicone Flat Roof System
1
60-Second Online Price Check or Infrared/Core Roof Audit
60-Sec Online Check or 48–72 Hr Audit
Check your commercial roof estimate in 60 seconds via /price-chat (and claim a $250 Credit on Your Estimate), or schedule a site audit to inspect existing membrane adhesion, wet-insulation zones, drainage slopes, and parapet flashings.
We pressure-wash the existing roof deck, remove and replace any localized saturated substrate sections, secure loose flashings, and apply specialized adhesion primers to metal, Mod-Bit, BUR, single-ply, or concrete.
Our Caliber Certified (CAN/ULC-S705.2 Licensed) Commercial Spray Foam Installers spray 1.5" to 4.5"+ of 3 lb roofing-grade SPF, building positive slope-to-drain around low ponding zones and self-flashing every HVAC curb, parapet, and pipe boot.
We spray-apply 25–35+ dry mils of high-solids elastomeric silicone coating (with optional ceramic granules for walk pads), plus interior IFTI DC315® if underside foam is exposed, and issue your warranty and Ontario Building Code compliance package.
Transparent 2026 installed commercial roofing pricing across the GTA and Ontario. Get a $250 Credit on Your Estimate — Check Your Price in 60 Seconds • No Site Visit Required.
In-Depth: Commercial & Industrial Flat Roof Systems
4 min read
CONTINUOUS INSULATION + SEAMLESS WATERPROOFING IN ONE MOBILIZATION
For new warehouses, cold-storage plants, and industrial facilities, a 3 lb SPF + UV silicone roof system replaces three separate conventional layers (vapour retarder, mechanically fastened polyiso boards, and seamed single-ply membrane) with a single monolithic assembly.
Engineering Metric
SPF + Silicone Roof System Advantage
Thermal Continuity
R-6.5/inch with zero thermal bridging from thousands of metal deck screws
Custom Tapered Slope
Sprayed to variable thickness to build positive drainage toward scuppers & drains
Zero Laps or Seams
Self-flashing monolithic seal around HVAC curbs, skylights, parapets & pitch pans
EXTEND YOUR COMMERCIAL ROOF 20+ YEARS AT 35%–55% LOWER CAPITAL COST
Tearing off a 20,000 to 100,000 sq ft commercial roof exposes your inventory to weather risk, requires cranes and dumpsters, and buries functional substrate in landfills. Our restoration overlay locks down your existing roof while upgrading its R-value.
Comparison Factor
Conventional Tear-Off & Re-Roof
3 lb SPF + UV Silicone Restoration
2026 Installed Cost
$12.00 – $22.00+ / sq ft
$6.50 – $8.95 / sq ft (Saves 35%–55%)
Facility Downtime
2–6 weeks of noise, cranes & open deck risk
Zero downtime — operations continue uninterrupted
Landfill Disposal
Tonnes of old membrane & polyiso dump fees
Zero tear-off waste (sustainable retrofit)
Ponding Water Resistance
Standing water attacks glued/welded seams
Seamless tapered SPF + ponding-rated silicone
End-of-Term Renewal
Another complete tear-off in 15–20 years
Simple clean & silicone recoat for 20+ more years
HIGH-OUTPUT INDUSTRIAL PROPORTIONER FLEET FOR 5,000 TO 100,000+ SQ FT ROOFS
At Sprayfoam Solutions Toronto Inc., our Caliber Certified (CAN/ULC-S705.2 Licensed) Commercial Spray Foam Installers deploy multiple commercial roofing rigs simultaneously to capture optimal dry-weather windows and complete large roofs on schedule.
Whether your facility requires an exterior 3 lb SPF + UV silicone roof membrane or an interior underside roof-deck 2 lb closed-cell spray foam + IFTI DC315® thermal barrier, our team delivers complete Ontario Building Code compliance under one contract.
Roof Zone
Ontario Building Code Requirement
Our Turnkey Solution
Exterior Flat Roof Deck
UV, Wind-Uplift & Ponding Protection
3 lb Roofing SPF + 25–35 mil High-Solids Silicone
Interior Exposed Roof Deck
Ontario Building Code 3.1.4.2 Thermal Barrier
2 lb CAN/ULC-S705.1 SPF + 18 mil WFT IFTI DC315®
Compliance Package
Municipal Permit & Insurer Sign-Off
Lifetime Thermal Warranty + CCMC Municipal Compliance Documentation
FAQ
Frequently Asked Questions
How much does a commercial SPF flat roof and silicone coating cost in Ontario in 2026?
In 2026, commercial SPF flat roof restoration in Ontario costs $5.50 to $9.50 per sq. ft. for most projects. Specifically, a high-solids UV silicone elastomeric restoration overcoat on a structurally sound roof runs $4.50 to $6.50 per sq. ft., a 2"–3" high-density 3 lb SPF + UV silicone membrane overlay runs $6.50 to $8.95 per sq. ft., and a high-R tapered SPF system (R-25 to R-35+) runs $8.95 to $11.50 per sq. ft. Total commercial projects typically range from $22,500 for a 5,000 sq ft industrial unit to $300,000+ for large distribution hubs. Get a $250 Credit on Your Estimate — Check Your Price in 60 Seconds at /price-chat with no site visit required.
How does an SPF + silicone flat roof handle standing ponding water and freeze-thaw cycles?
Ponding water destroys conventional roofs in two ways: it exploits lap seams in TPO/EPDM/Mod-Bit, and it breaks down water-based acrylic coatings. Our dual-layer system solves both problems: first, our Caliber Certified (CAN/ULC-S705.2 Licensed) Commercial Spray Foam Installers spray 3 lb closed-cell SPF in tapered passes to fill low depressions and direct water toward drains with zero seams; second, our moisture-cured high-solids silicone membrane is chemically impervious to permanent standing water and expands/contracts effortlessly through -30°C to +35°C Ontario thermal swings.
Can you apply a spray foam and silicone roof over our existing TPO, EPDM, BUR, Mod-Bit, or metal roof without a tear-off?
Yes, in the vast majority of commercial buildings. Provided less than 20%–25% of the underlying insulation is saturated (which we verify via moisture scanning and core sampling, replacing only localized wet zones), we power-wash, prime, and bond our 3 lb SPF + UV silicone system directly over your existing membrane. Avoiding a tear-off saves 35%–55% in capital cost, eliminates landfill dump fees, and keeps your facility 100% operational below.
What is the difference between 2 lb interior wall foam and 3 lb exterior roofing spray foam?
Standard medium-density 2 lb closed-cell foam (CAN/ULC-S705.1) has a compressive strength of ~25–30 PSI and is engineered for interior walls, underside roof decks, and agricultural barns. Exterior commercial flat roofs require high-density 2.8–3.0 lb roofing-grade closed-cell SPF, which delivers 50 to 60+ PSI compressive strength to withstand rooftop HVAC technician foot traffic, dropped tools, snow loads, and severe hail without denting or delaminating.
Does a commercial SPF flat roof meet Ontario Building Code SB-10 energy requirements?
Yes. At R-6.5 per inch, high-density 3 lb closed-cell SPF delivers the highest R-value per inch of any commercial roofing material — and because it is monolithic, it eliminates the 15%–25% thermal bridging loss caused by metal plate fasteners and board gaps in conventional polyiso assemblies. We custom-spray 2" to 5.5"+ to achieve your exact Ontario Building Code Division B, Part 12 (SB-10) thermal target.
Do we need IFTI DC315® fire coating for a commercial flat roof project?
When we apply 3 lb SPF + UV silicone on the exterior top side of your metal or concrete roof deck, the structural deck separates the foam from the interior, so interior fire coating is not required. However, if you choose to insulate the interior underside of your warehouse roof deck with exposed 2 lb closed-cell foam, the Ontario Building Code requires a 15-minute thermal barrier — which we provide under Turnkey Single-Contractor Accountability using CAN/ULC-S124 certified IFTI DC315® intumescent coating.
How long does a commercial SPF and silicone flat roof last before needing replacement?
A properly maintained SPF + high-solids silicone roof is a renewable lifetime asset. The underlying 3 lb closed-cell foam is completely shielded from UV rays by the 25–35 mil silicone topcoat. After 15–20+ years of weathering, rather than tearing off the roof, we simply pressure-wash the surface and apply a fresh coat of silicone — extending the roof warranty another 15–20 years at a fraction of reroofing cost.
How quickly can I get a 2026 commercial flat roof quote in the GTA or Ontario?
You can calculate an instant ballpark estimate right now at /price-chat — Get a $250 Credit on Your Estimate — Check Your Price in 60 Seconds • No Site Visit Required. Following your online check, our commercial roofing estimator can perform an on-site core and moisture audit within 48–72 hours anywhere in the GTA or Southern Ontario.
Trusted by Ontario's top builders, general contractors & homeowners.
Certified Installation & On-Time Delivery
5.0(45+ Google Reviews)
“We had 20,000 sq ft of our logistics warehouse insulated with closed-cell spray foam. The building condensation is completely gone. Their commercial rig handled the project in just three days without interrupting our daily operations.”
Amit P.
Mississauga, ON
Facilities DirectorCommercialWarehouse Insulation
“They insulated a retail commercial building envelope for us. High-performance closed-cell foam acted as both insulation and vapor barrier. Excellent scheduling and pass on code inspection. Highly professional.”
Rajesh S.
Etobicoke, Toronto
General ContractorCommercialCommercial Spray Foam
“Used them for a multi-unit commercial project. They applied closed-cell spray foam on metal stud walls. Passed building code on the first inspection. Clean framing and no overspray. Excellent partner.”
Priya K.
Vaughan, ON
BuilderCommercialOffice Building Insulation
“Critical temperature control was required for our food distribution warehouse. They sprayed closed-cell foam on the ceiling and walls. Amazing condensation control and thermal barrier. Professional commercial crew.”
“We hired them to insulate a large steel commercial building. The closed-cell spray foam bonds perfectly to metal panels, stopping rust and drafts. Excellent WSIB-compliant, licensed crew.”
Fatima Z.
Markham, ON
Project ManagerCommercialMetal Building Insulation
“They sprayed our large farm workshop and barn walls. Condensation was ruining our equipment. Now the barn is draft-free and dry. Great commercial rates and top quality. Highly recommended.”
Vikram M.
Barrie, ON
Project ManagerCommercialAgricultural Spray Foam
“We use their commercial services for all our industrial buildings. Their rigs are top-of-the-line, and their installers are Caliber Certified (CAN/ULC-S705.2 licensed). Passed building inspections first try.”
Rohan D.
Hamilton, ON
BuilderCommercialCommercial Spray Foam
“Insulated a commercial property crawl space to stop drafts rising into offices. Polyurethane closed-cell foam was applied flawlessly. Punctual crew, WSIB insured, $5M liability coverage. Highly recommended.”
Tariq H.
Oakville, ON
Property ManagerCommercialCommercial Crawl Space
“Professional warehouse insulation project. They covered all our stock with plastic sheeting before spraying. Clean, code-compliant, and on-schedule. Our HVAC energy bills dropped by 35%.”
Yasmin R.
Pickering, ON
Facilities DirectorCommercialWarehouse Insulation
“Hired them to fix condensation in an industrial steel warehouse. Closed-cell spray foam solved the problem completely and added structural rigidity to the metal siding. Outstanding service.”
Sanjay G.
Kitchener, ON
General ContractorCommercialMetal Building Insulation
“Insulated four exterior industrial storage tanks using CCMC-approved closed-cell polyurethane foam. The thermal performance is exceptional. Safe mobilization, certified crews, and zero safety issues.”
Anjali V.
London, ON
Facilities DirectorCommercialSilo & Tank Insulation
“We needed custom shipping containers insulated for mobile office use. They sprayed 2 inches of closed-cell foam on the interior walls. No condensation, perfectly flat finish. Passed inspection easily.”
“Hired them to insulate a multi-story apartment building renovation. Spanning five floors, they completed the wall and floor assemblies on schedule. Professional, fully insured, and CCMC certified.”
“Excellent commercial insulation partner. We use them for all our steel-frame developments. Their high-output mobile rigs are fast, and the foam thickness is highly consistent. Excellent rates.”
Wei Z.
Vaughan, ON
General ContractorCommercialCommercial Spray Foam
“They insulated our older commercial warehouse ceiling. Closed-cell spray foam sealed all the deck joints and stopped winter drafts. We noticed a major reduction in gas bills.”
Ying H.
Brampton, ON
Facilities DirectorCommercialWarehouse Retrofit
“Hired Sprayfoam Solutions to restore our warehouse roof using a hybrid flat roof spray foam and silicone roof coating. No tear-off was required, saving us over $40,000 compared to a traditional roof replacement. The roof is 100% waterproof and reflects heat perfectly.”
“Our commercial flat roof was constantly leaking. They applied high-density spray foam and a high-solids silicone coating. It created a seamless, ponding-water resistant membrane. The project was completed on budget with zero downtime for our tenants.”
Linh N.
Mississauga, ON
Property ManagerCommercialFlat Roof Restoration
“Saved our commercial roof without a costly tear-off. They repaired the leaks and applied a reflective silicone coating. Rooftop temperatures dropped significantly, lowering our summer AC costs. Excellent service.”
“Outstanding roof restoration project. They applied 3lb high-density spray foam directly over our old membrane. Sealed every roof penetration perfectly. Excellent certified crew, WSIB insured.”
Min-Ji K.
Brampton, ON
Project ManagerCommercialCommercial Flat Roof
“Professional flat roof restoration. Seamless foam and silicone coating has stopped all leaks and significantly improved the building insulation. Professional, licensed team, and competitive pricing.”
Hao T.
Markham, ON
Property ManagerCommercialFlat Roof Restoration
“Great flat roof coating service. They performed a thermal scan to locate wet insulation, replaced those sections, and coated the roof with reflective silicone. 100% leak-proof and energy efficient.”
“Insulated and waterproofed our industrial plaza flat roof. Seamless high-density foam stops drafts and water leaks in one shot. Certified installers using CCMC-approved roofing systems.”
Kevin C.
Hamilton, ON
Project ManagerCommercialFlat Roof Spray Foam
“Professional, certified crews. They did a marvelous job applying silicone coating on our warehouse flat roof. Complete ponding water resistance and 20-year durability. Excellent work.”
“We have used them for two flat roof restorations now. High-density spray foam followed by white reflective silicone. Tenants reported immediate comfort improvements. No leaks, highly recommended.”
“Restored our retail store flat roof without interrupting business. Seamless spray foam and silicone coating has survived two harsh winters with zero issues. Great warranties and WSIB insured.”
“Excellent roof restoration service. Thermal scan was done first to ensure no wet insulation was covered. The silicone coating application was very clean with no overspray on surrounding cars.”
Stephanie L.
London, ON
Project ManagerCommercialSilicone Roof Coating
“High-density polyurethane foam and reflective coating applied on our manufacturing facility roof. Lowered our cooling costs by 20% last summer. Excellent service, clean, and highly professional.”
Ronald K.
Vaughan, ON
Facilities DirectorCommercialFlat Roof Spray Foam
“We needed a certified 15-minute thermal barrier for a large commercial permit. Their DC315 application was flawlessly done, meeting all Building Code compliance standards on the first inspection. They provided full wet film thickness documentation.”
Rebecca P.
Scarborough, Toronto
General ContractorCommercialDC315 Fire Coating
“Highest rated fireproofing team in the GTA. They arrived within 48 hours for a CAN/ULC-S124 compliant intumescent coating project in a basement suite. The documentation provided was exactly what the inspector needed.”
Anthony G.
Mississauga, ON
General ContractorResidentialSpray Foam & DC315
“We use Sprayfoam Solutions for all our exposed spray foam projects. They apply the closed-cell foam and the DC315 fire coating on the same day—one crew, one mobilization. Saves time and framing stays clean.”
Laura J.
Vaughan, ON
BuilderResidentialDC315 Thermal Barrier
“Highly professional DC315 intumescent coating application on exposed spray foam in our mechanical rooms. The crew verified wet film thickness (WFT) continuously and left a spotless workspace. Passed inspection.”
Albert N.
Brampton, ON
Project ManagerCommercialDC315 Fire Coating
“Ontario Building Code requires a thermal barrier over exposed basement spray foam. Their DC315 application was fast and certified. They provided the CCMC evaluation report immediately for our permit file.”
Cynthia O.
Markham, ON
BuilderResidentialThermal Barrier Code Compliance
“They applied DC315 fire coating over exposed spray foam in an attic storage area. Passed building code inspection first try. Certified applicator, WSIB insured, and same-week scheduling. Excellent.”
Ryan S.
Oakville, ON
General ContractorCommercialDC315 Fire Coating
“We hire them for all our legal duplex conversions. They spray the closed-cell insulation and follow up with DC315 intumescent coating for code-compliant fire safety. Fast, neat, and highly professional.”
Kathleen D.
Hamilton, ON
BuilderResidentialSpray Foam & Fire Coating
“Excellent experience. Certified DC315 application over foam in a commercial mechanical loft. Passed inspection easily. They provided a full documentation package with CCMC evaluation reports.”
Justin F.
Barrie, ON
General ContractorCommercialDC315 Thermal Barrier
“We needed a 15-minute thermal barrier in an unfinished basement remodel. They sprayed the closed-cell foam and followed up with code-compliant DC315 fire coating. Passed building permit inspection.”
Amy W.
Kitchener, ON
BuilderResidentialDuplex Code Compliance
“Certified intumescent fire paint over spray foam. The application was clean with no overspray on steel beams or electrical runs. The crew was professional, polite, and fully WSIB insured.”
Brandon H.
London, ON
General ContractorCommercialDC315 Fire Coating
“Passed our building inspection with flying colors. The DC315 application met the 15-minute thermal barrier requirements under the Ontario building code. Highly professional service and documentation.”
Shirley A.
Oshawa, ON
General ContractorCommercialExposed Foam Fire Code
“Excellent duplex conversion project. They applied closed-cell spray foam and DC315 fire coating in the mechanical room. Outstanding coordination, clean work, and complete code compliance.”
Frank T.
East York, Toronto
BuilderResidentialDC315 Thermal Barrier
“Professional fire barrier application. They applied DC315 over exposed polyurethane spray foam. Certified thickness, verified WFT, and flawless documentation for our project engineers.”
Angela E.
Mississauga, ON
General ContractorCommercialDC315 Fire Coating
“Certified DC315 applicator. They sprayed our custom home crawl space foam and protected the space with ignition barrier coating. Neat, prompt, and completely compliant with local building codes.”
Gregory M.
Vaughan, ON
BuilderResidentialSpray Foam & Fire Paint
“They did a fantastic job with DC315 intumescent coating over foam in our commercial kitchen expansion. CCMC approved, passed municipal inspection first try. Professional and clean crews.”
Anna L.
Oakville, ON
General ContractorCommercialDC315 Thermal Barrier
“Hired them to apply cementitious fireproofing on the structural steel beams of a new commercial parking garage. Professional spray application of SFRM to code thickness. Passed third-party inspections first try with zero thickness issues.”
Fatima Z.
York, Toronto
General ContractorCommercialCementitious Fireproofing
“Excellent structural steel fireproofing service. They sprayed low-density cementitious material on the metal deck and columns. Crew worked safe at heights, fully WSIB compliant, and completed the job on schedule.”
Vikram M.
Mississauga, ON
BuilderCommercialCementitious Fireproofing
“We hire them for all our mid-rise commercial steel projects. Their crews apply cementitious fire resistive material (SFRM) to exact building code thickness. Prompt service, great prices, and fully insured.”
“Passed our building inspection. They applied cementitious fire protection on steel columns in our new industrial building. Professional prep, excellent density control, and spotless cleanup. Great contractor.”
Tariq H.
Brampton, ON
BuilderCommercialCementitious Fireproofing
“Professional SFRM fireproofing contractor. They sprayed structural steel beams to meet 2-hour rating requirements. They provided complete technical documents and W/D ratio thickness charts for local inspectors.”
Yasmin R.
Markham, ON
General ContractorCommercialCommercial Fireproofing
“Sprayed cementitious fireproofing on steel deck and joists for our school project. Outstanding team, certified fireproofing crews, WSIB insured. They completed the work on schedule, passing inspection easily.”
Sanjay G.
Oakville, ON
BuilderCommercialStructural Steel Fireproofing
“Reliable commercial fireproofing contractor. Applied cementitious spray on structural steel beams in our new retail development. Excellent price, fast application, and zero scheduling delays.”
“We needed medium-density cementitious fireproofing for a semi-exposed commercial parking deck. They applied the Monokote SFRM flawlessly. Passed thickness inspection first try. Outstanding crew.”
Chen W.
Barrie, ON
General ContractorCommercialParking Garage Fireproofing
“Great experience. They sprayed structural steel columns on our new commercial warehouse. The application thickness met all building code requirements. Highly professional, certified crews.”
Mei L.
Whitby, ON
BuilderCommercialCommercial Fireproofing
“Hired them to fireproof steel framing in a commercial office. They applied cementitious spray to exact specification and cleaned up every scrap of overspray. Passed inspections without issues.”
“Highly professional SFRM application. They worked around our other trades to fireproof structural columns on schedule. Clean work, CCMC approved materials, WSIB insured. Will use again.”
Ying H.
London, ON
General ContractorCommercialCementitious Fireproofing
“We hired Sprayfoam Solutions to apply thin-film intumescent fire coating on architecturally exposed structural steel (AESS) beams in our new corporate headquarters lobby. The finish is incredibly smooth and looks like paint, yet provides a certified 2-hour fire rating. Passed third-party DFT testing first try.”
Jun Y.
Downtown Toronto, Toronto
General ContractorCommercialIntumescent Steel Fireproofing
“Outstanding thin-film intumescent application on exposed steel columns in a retail space. The architects wanted the steel visible, so cementitious was out. They did a marvelous job, primer and topcoat were perfectly applied.”
Linh N.
Mississauga, ON
BuilderCommercialIntumescent Fire Protection
“They applied intumescent coating on exposed timber beams in a heritage building restoration. Achieved code fire rating while preserving the historical wooden structure. Excellent workmanship, clean and professional.”
Jin S.
The Annex, Toronto
General ContractorCommercialAESS Fireproofing
“Excellent intumescent application for exposed structural steel in a commercial office. They verified dry film thickness (DFT) meticulously and provided complete documentation for the fire marshal. Passed inspection.”
“Hired them to apply intumescent fireproofing on steel structural columns in a new restaurant. Smooth finish, CAN/ULC-S101 compliant, and completed on schedule. Great contractor and pricing.”
Hao T.
Brampton, ON
BuilderCommercialThin-Film Intumescent
“Professional intumescent coating application on steel framing. Architects specified exposed steel look. This thin-film coating expanded perfectly in fire testing. Certified crews, WSIB insured, $5M liability.”
Raymond C.
Markham, ON
General ContractorCommercialAESS Fire Protection
“We needed a 1-hour fire rating on exposed structural steel columns. They applied thin-film water-based intumescent. Excellent smooth paint-like finish, on schedule, and zero issues with building code inspector.”
Kevin C.
Oakville, ON
Project ManagerCommercialIntumescent Fireproofing
“Great thin-film intumescent coating service. They worked weekends to prevent disrupting our ongoing commercial tenant operations. The finish looks spectacular and meets building code. Highly recommended.”
Raymond K.
Hamilton, ON
BuilderCommercialIntumescent Steel Coating
“They applied intumescent fire paint on exposed structural steel columns in a new school library. Smooth AESS finish, WSIB insured, same-week scheduling. Excellent coordination with our drywallers.”
Brenda C.
Barrie, ON
General ContractorCommercialIntumescent Fire Protection
“Professional thin-film intumescent application on exposed steel rafters. Excellent dry film thickness (DFT) reports provided. Passed building inspections first try. Best fireproofing contractor.”
Samuel G.
Pickering, ON
BuilderCommercialAESS Fireproofing
“They sprayed thin-film intumescent over steel framing in our commercial renovation. Cured quickly and was ready for topcoat in 24 hours. Certified crews, outstanding workmanship and pricing.”
Pamela R.
Kitchener, ON
General ContractorCommercialIntumescent Steel Coating
“Insulated and fireproofed historical timber beams in a heritage loft conversion. Thin-film intumescent kept the wood visible while meeting the 1-hour fire safety code. Outstanding workmanship.”
Benjamin B.
London, ON
BuilderCommercialHeritage Fire Protection
“We had 20,000 sq ft of our logistics warehouse insulated with closed-cell spray foam. The building condensation is completely gone. Their commercial rig handled the project in just three days without interrupting our daily operations.”
Amit P.
Mississauga, ON
Facilities DirectorCommercialWarehouse Insulation
“They insulated a retail commercial building envelope for us. High-performance closed-cell foam acted as both insulation and vapor barrier. Excellent scheduling and pass on code inspection. Highly professional.”
Rajesh S.
Etobicoke, Toronto
General ContractorCommercialCommercial Spray Foam
“Used them for a multi-unit commercial project. They applied closed-cell spray foam on metal stud walls. Passed building code on the first inspection. Clean framing and no overspray. Excellent partner.”
Priya K.
Vaughan, ON
BuilderCommercialOffice Building Insulation
“Critical temperature control was required for our food distribution warehouse. They sprayed closed-cell foam on the ceiling and walls. Amazing condensation control and thermal barrier. Professional commercial crew.”
“We hired them to insulate a large steel commercial building. The closed-cell spray foam bonds perfectly to metal panels, stopping rust and drafts. Excellent WSIB-compliant, licensed crew.”
Fatima Z.
Markham, ON
Project ManagerCommercialMetal Building Insulation
“They sprayed our large farm workshop and barn walls. Condensation was ruining our equipment. Now the barn is draft-free and dry. Great commercial rates and top quality. Highly recommended.”
Vikram M.
Barrie, ON
Project ManagerCommercialAgricultural Spray Foam
“We use their commercial services for all our industrial buildings. Their rigs are top-of-the-line, and their installers are Caliber Certified (CAN/ULC-S705.2 licensed). Passed building inspections first try.”
Rohan D.
Hamilton, ON
BuilderCommercialCommercial Spray Foam
“Insulated a commercial property crawl space to stop drafts rising into offices. Polyurethane closed-cell foam was applied flawlessly. Punctual crew, WSIB insured, $5M liability coverage. Highly recommended.”
Tariq H.
Oakville, ON
Property ManagerCommercialCommercial Crawl Space
“Professional warehouse insulation project. They covered all our stock with plastic sheeting before spraying. Clean, code-compliant, and on-schedule. Our HVAC energy bills dropped by 35%.”
Yasmin R.
Pickering, ON
Facilities DirectorCommercialWarehouse Insulation
“Hired them to fix condensation in an industrial steel warehouse. Closed-cell spray foam solved the problem completely and added structural rigidity to the metal siding. Outstanding service.”
Sanjay G.
Kitchener, ON
General ContractorCommercialMetal Building Insulation
“Insulated four exterior industrial storage tanks using CCMC-approved closed-cell polyurethane foam. The thermal performance is exceptional. Safe mobilization, certified crews, and zero safety issues.”
Anjali V.
London, ON
Facilities DirectorCommercialSilo & Tank Insulation
“We needed custom shipping containers insulated for mobile office use. They sprayed 2 inches of closed-cell foam on the interior walls. No condensation, perfectly flat finish. Passed inspection easily.”
“Hired them to insulate a multi-story apartment building renovation. Spanning five floors, they completed the wall and floor assemblies on schedule. Professional, fully insured, and CCMC certified.”
“Excellent commercial insulation partner. We use them for all our steel-frame developments. Their high-output mobile rigs are fast, and the foam thickness is highly consistent. Excellent rates.”
Wei Z.
Vaughan, ON
General ContractorCommercialCommercial Spray Foam
“They insulated our older commercial warehouse ceiling. Closed-cell spray foam sealed all the deck joints and stopped winter drafts. We noticed a major reduction in gas bills.”
Ying H.
Brampton, ON
Facilities DirectorCommercialWarehouse Retrofit
“Hired Sprayfoam Solutions to restore our warehouse roof using a hybrid flat roof spray foam and silicone roof coating. No tear-off was required, saving us over $40,000 compared to a traditional roof replacement. The roof is 100% waterproof and reflects heat perfectly.”
“Our commercial flat roof was constantly leaking. They applied high-density spray foam and a high-solids silicone coating. It created a seamless, ponding-water resistant membrane. The project was completed on budget with zero downtime for our tenants.”
Linh N.
Mississauga, ON
Property ManagerCommercialFlat Roof Restoration
“Saved our commercial roof without a costly tear-off. They repaired the leaks and applied a reflective silicone coating. Rooftop temperatures dropped significantly, lowering our summer AC costs. Excellent service.”
“Outstanding roof restoration project. They applied 3lb high-density spray foam directly over our old membrane. Sealed every roof penetration perfectly. Excellent certified crew, WSIB insured.”
Min-Ji K.
Brampton, ON
Project ManagerCommercialCommercial Flat Roof
“Professional flat roof restoration. Seamless foam and silicone coating has stopped all leaks and significantly improved the building insulation. Professional, licensed team, and competitive pricing.”
Hao T.
Markham, ON
Property ManagerCommercialFlat Roof Restoration
“Great flat roof coating service. They performed a thermal scan to locate wet insulation, replaced those sections, and coated the roof with reflective silicone. 100% leak-proof and energy efficient.”
“Insulated and waterproofed our industrial plaza flat roof. Seamless high-density foam stops drafts and water leaks in one shot. Certified installers using CCMC-approved roofing systems.”
Kevin C.
Hamilton, ON
Project ManagerCommercialFlat Roof Spray Foam
“Professional, certified crews. They did a marvelous job applying silicone coating on our warehouse flat roof. Complete ponding water resistance and 20-year durability. Excellent work.”
“We have used them for two flat roof restorations now. High-density spray foam followed by white reflective silicone. Tenants reported immediate comfort improvements. No leaks, highly recommended.”
“Restored our retail store flat roof without interrupting business. Seamless spray foam and silicone coating has survived two harsh winters with zero issues. Great warranties and WSIB insured.”
“Excellent roof restoration service. Thermal scan was done first to ensure no wet insulation was covered. The silicone coating application was very clean with no overspray on surrounding cars.”
Stephanie L.
London, ON
Project ManagerCommercialSilicone Roof Coating
“High-density polyurethane foam and reflective coating applied on our manufacturing facility roof. Lowered our cooling costs by 20% last summer. Excellent service, clean, and highly professional.”
Ronald K.
Vaughan, ON
Facilities DirectorCommercialFlat Roof Spray Foam
“We needed a certified 15-minute thermal barrier for a large commercial permit. Their DC315 application was flawlessly done, meeting all Building Code compliance standards on the first inspection. They provided full wet film thickness documentation.”
Rebecca P.
Scarborough, Toronto
General ContractorCommercialDC315 Fire Coating
“Highest rated fireproofing team in the GTA. They arrived within 48 hours for a CAN/ULC-S124 compliant intumescent coating project in a basement suite. The documentation provided was exactly what the inspector needed.”
Anthony G.
Mississauga, ON
General ContractorResidentialSpray Foam & DC315
“We use Sprayfoam Solutions for all our exposed spray foam projects. They apply the closed-cell foam and the DC315 fire coating on the same day—one crew, one mobilization. Saves time and framing stays clean.”
Laura J.
Vaughan, ON
BuilderResidentialDC315 Thermal Barrier
“Highly professional DC315 intumescent coating application on exposed spray foam in our mechanical rooms. The crew verified wet film thickness (WFT) continuously and left a spotless workspace. Passed inspection.”
Albert N.
Brampton, ON
Project ManagerCommercialDC315 Fire Coating
“Ontario Building Code requires a thermal barrier over exposed basement spray foam. Their DC315 application was fast and certified. They provided the CCMC evaluation report immediately for our permit file.”
Cynthia O.
Markham, ON
BuilderResidentialThermal Barrier Code Compliance
“They applied DC315 fire coating over exposed spray foam in an attic storage area. Passed building code inspection first try. Certified applicator, WSIB insured, and same-week scheduling. Excellent.”
Ryan S.
Oakville, ON
General ContractorCommercialDC315 Fire Coating
“We hire them for all our legal duplex conversions. They spray the closed-cell insulation and follow up with DC315 intumescent coating for code-compliant fire safety. Fast, neat, and highly professional.”
Kathleen D.
Hamilton, ON
BuilderResidentialSpray Foam & Fire Coating
“Excellent experience. Certified DC315 application over foam in a commercial mechanical loft. Passed inspection easily. They provided a full documentation package with CCMC evaluation reports.”
Justin F.
Barrie, ON
General ContractorCommercialDC315 Thermal Barrier
“We needed a 15-minute thermal barrier in an unfinished basement remodel. They sprayed the closed-cell foam and followed up with code-compliant DC315 fire coating. Passed building permit inspection.”
Amy W.
Kitchener, ON
BuilderResidentialDuplex Code Compliance
“Certified intumescent fire paint over spray foam. The application was clean with no overspray on steel beams or electrical runs. The crew was professional, polite, and fully WSIB insured.”
Brandon H.
London, ON
General ContractorCommercialDC315 Fire Coating
“Passed our building inspection with flying colors. The DC315 application met the 15-minute thermal barrier requirements under the Ontario building code. Highly professional service and documentation.”
Shirley A.
Oshawa, ON
General ContractorCommercialExposed Foam Fire Code
“Excellent duplex conversion project. They applied closed-cell spray foam and DC315 fire coating in the mechanical room. Outstanding coordination, clean work, and complete code compliance.”
Frank T.
East York, Toronto
BuilderResidentialDC315 Thermal Barrier
“Professional fire barrier application. They applied DC315 over exposed polyurethane spray foam. Certified thickness, verified WFT, and flawless documentation for our project engineers.”
Angela E.
Mississauga, ON
General ContractorCommercialDC315 Fire Coating
“Certified DC315 applicator. They sprayed our custom home crawl space foam and protected the space with ignition barrier coating. Neat, prompt, and completely compliant with local building codes.”
Gregory M.
Vaughan, ON
BuilderResidentialSpray Foam & Fire Paint
“They did a fantastic job with DC315 intumescent coating over foam in our commercial kitchen expansion. CCMC approved, passed municipal inspection first try. Professional and clean crews.”
Anna L.
Oakville, ON
General ContractorCommercialDC315 Thermal Barrier
“Hired them to apply cementitious fireproofing on the structural steel beams of a new commercial parking garage. Professional spray application of SFRM to code thickness. Passed third-party inspections first try with zero thickness issues.”
Fatima Z.
York, Toronto
General ContractorCommercialCementitious Fireproofing
“Excellent structural steel fireproofing service. They sprayed low-density cementitious material on the metal deck and columns. Crew worked safe at heights, fully WSIB compliant, and completed the job on schedule.”
Vikram M.
Mississauga, ON
BuilderCommercialCementitious Fireproofing
“We hire them for all our mid-rise commercial steel projects. Their crews apply cementitious fire resistive material (SFRM) to exact building code thickness. Prompt service, great prices, and fully insured.”
“Passed our building inspection. They applied cementitious fire protection on steel columns in our new industrial building. Professional prep, excellent density control, and spotless cleanup. Great contractor.”
Tariq H.
Brampton, ON
BuilderCommercialCementitious Fireproofing
“Professional SFRM fireproofing contractor. They sprayed structural steel beams to meet 2-hour rating requirements. They provided complete technical documents and W/D ratio thickness charts for local inspectors.”
Yasmin R.
Markham, ON
General ContractorCommercialCommercial Fireproofing
“Sprayed cementitious fireproofing on steel deck and joists for our school project. Outstanding team, certified fireproofing crews, WSIB insured. They completed the work on schedule, passing inspection easily.”
Sanjay G.
Oakville, ON
BuilderCommercialStructural Steel Fireproofing
“Reliable commercial fireproofing contractor. Applied cementitious spray on structural steel beams in our new retail development. Excellent price, fast application, and zero scheduling delays.”
“We needed medium-density cementitious fireproofing for a semi-exposed commercial parking deck. They applied the Monokote SFRM flawlessly. Passed thickness inspection first try. Outstanding crew.”
Chen W.
Barrie, ON
General ContractorCommercialParking Garage Fireproofing
“Great experience. They sprayed structural steel columns on our new commercial warehouse. The application thickness met all building code requirements. Highly professional, certified crews.”
Mei L.
Whitby, ON
BuilderCommercialCommercial Fireproofing
“Hired them to fireproof steel framing in a commercial office. They applied cementitious spray to exact specification and cleaned up every scrap of overspray. Passed inspections without issues.”
“Highly professional SFRM application. They worked around our other trades to fireproof structural columns on schedule. Clean work, CCMC approved materials, WSIB insured. Will use again.”
Ying H.
London, ON
General ContractorCommercialCementitious Fireproofing
“We hired Sprayfoam Solutions to apply thin-film intumescent fire coating on architecturally exposed structural steel (AESS) beams in our new corporate headquarters lobby. The finish is incredibly smooth and looks like paint, yet provides a certified 2-hour fire rating. Passed third-party DFT testing first try.”
Jun Y.
Downtown Toronto, Toronto
General ContractorCommercialIntumescent Steel Fireproofing
“Outstanding thin-film intumescent application on exposed steel columns in a retail space. The architects wanted the steel visible, so cementitious was out. They did a marvelous job, primer and topcoat were perfectly applied.”
Linh N.
Mississauga, ON
BuilderCommercialIntumescent Fire Protection
“They applied intumescent coating on exposed timber beams in a heritage building restoration. Achieved code fire rating while preserving the historical wooden structure. Excellent workmanship, clean and professional.”
Jin S.
The Annex, Toronto
General ContractorCommercialAESS Fireproofing
“Excellent intumescent application for exposed structural steel in a commercial office. They verified dry film thickness (DFT) meticulously and provided complete documentation for the fire marshal. Passed inspection.”
“Hired them to apply intumescent fireproofing on steel structural columns in a new restaurant. Smooth finish, CAN/ULC-S101 compliant, and completed on schedule. Great contractor and pricing.”
Hao T.
Brampton, ON
BuilderCommercialThin-Film Intumescent
“Professional intumescent coating application on steel framing. Architects specified exposed steel look. This thin-film coating expanded perfectly in fire testing. Certified crews, WSIB insured, $5M liability.”
Raymond C.
Markham, ON
General ContractorCommercialAESS Fire Protection
“We needed a 1-hour fire rating on exposed structural steel columns. They applied thin-film water-based intumescent. Excellent smooth paint-like finish, on schedule, and zero issues with building code inspector.”
Kevin C.
Oakville, ON
Project ManagerCommercialIntumescent Fireproofing
“Great thin-film intumescent coating service. They worked weekends to prevent disrupting our ongoing commercial tenant operations. The finish looks spectacular and meets building code. Highly recommended.”
Raymond K.
Hamilton, ON
BuilderCommercialIntumescent Steel Coating
“They applied intumescent fire paint on exposed structural steel columns in a new school library. Smooth AESS finish, WSIB insured, same-week scheduling. Excellent coordination with our drywallers.”
Brenda C.
Barrie, ON
General ContractorCommercialIntumescent Fire Protection
“Professional thin-film intumescent application on exposed steel rafters. Excellent dry film thickness (DFT) reports provided. Passed building inspections first try. Best fireproofing contractor.”
Samuel G.
Pickering, ON
BuilderCommercialAESS Fireproofing
“They sprayed thin-film intumescent over steel framing in our commercial renovation. Cured quickly and was ready for topcoat in 24 hours. Certified crews, outstanding workmanship and pricing.”
Pamela R.
Kitchener, ON
General ContractorCommercialIntumescent Steel Coating
“Insulated and fireproofed historical timber beams in a heritage loft conversion. Thin-film intumescent kept the wood visible while meeting the 1-hour fire safety code. Outstanding workmanship.”
Benjamin B.
London, ON
BuilderCommercialHeritage Fire Protection
THE SPRAY FOAM EXPERTS
That Actually Lower Your Energy Bills
★★★★★5.0 Google Rating•55+ Verified Reviews•Serving Across Ontario
Direct contractor pricing · Caliber Certified (CAN/ULC-S705.2) Installers · $0 Travel Fee Across Ontario
50+ Cities & Municipalities
With regional mobile crews stationed right near you, we charge $0 travel fees and stand as the best, most trusted contractor to serve your home or commercial building anywhere in Ontario.