Sprayfoam SolutionsWe Serve GTA & Across Ontario!
Home

Residential

Major Projects
  • Custom New Homes
  • Additions & Renovations
  • Muskoka Cottages & Homes
  • Exterior Walls
  • Interior Ceiling Sound Dampening
Targeted Areas
  • Basements
  • Attics & Roof Decks
  • Crawl Spaces
  • Rim Joist Headers
  • Garages & Floors Over Garage
  • Cathedral Ceilings
  • Cantilevers & Overhangs
  • Under-Slab & Radiant Floors
  • Cold Rooms
  • RVs & Vans
  • Swimming Pools

Commercial

Buildings & Facilities
  • Commercial SPF & Fire Coating
  • Warehouse & Industrial
  • Metal Buildings
  • Barns & Agricultural
  • Multi-Unit Buildings
  • Flat Roof Systems
Specialty
  • Shipping Containers
  • Silos & Water Tanks

Code & Expert Guides

  • What is Spray Foam?
  • Cost of Spray Foam
  • Our Sprayfoam Chemicals
  • Certifications & Standards
  • Spray Foam Knowledge Base
Ontario Code & ULC Guides
  • Ontario R-Value & Code Guide
  • CAN/ULC-S705.2 Code Rules
  • Open-Cell vs. Closed-Cell

Thermal Barriers (Foam)

Core Systems
  • DC315 Intumescent Coating
  • Sprayfoam & Fire Coating (2-in-1)
Where Code Requires It
  • Mechanical & Furnace Rooms
  • Exposed Basements & Crawls
  • Attached Garage Ceilings
  • Warehouse Exposed Foam Decks
  • Unvented Attics & Roof Decks
  • Rim Joists & Floor Headers

Structural Fireproofing

Fireproofing Systems
  • Cementitious Fireproofing (SFRM)
  • Intumescent Fire Coating (Thin-Film)
Structural Assemblies
  • Structural Beams & Columns
  • Metal Floor & Roof Decks
  • Commercial Parkades & Garages
  • Architectural Exposed Steel (AESS)
  • Request Fire Spec & Quote

Code & Expert Guides

  • What is DC315 Fire Coating?
  • Cost of DC315 Fire Coating
  • Our Fire Coating Chemicals
  • Certifications & Standards
  • Fire Coating Knowledge Base
Ontario Code & ULC Guides
  • Ontario 15-Min Thermal Barrier
  • ULC 1–4 Hr Steel Ratings
  • DC315 vs. Type X Drywall
Locations
Ontario Service RegionsView All 50+ Cities →
Toronto & Central
Toronto · Etobicoke · North York · Scarborough
Peel Region
Mississauga · Brampton · Caledon
York Region
Vaughan · Markham · Richmond Hill · Newmarket
Halton Region
Oakville · Burlington · Milton · Halton Hills
Durham Region
Pickering · Whitby · Oshawa · Ajax · Clarington
Hamilton & Niagara
Hamilton · St. Catharines · Niagara Falls · Brantford
Kitchener / Waterloo / Guelph
Kitchener · Waterloo · Cambridge · Guelph
Barrie & Simcoe County
Barrie · Orillia · Innisfil · Collingwood
Muskoka & Cottage Country
Muskoka · Huntsville · Gravenhurst · Bracebridge
Windsor & Southwestern ON
Windsor · London · Sarnia · Chatham-Kent
Our WorkReviews
Contact UsGet My Pricing
Serving GTA & Beyond
Sprayfoam SolutionsWe Serve GTA & Across Ontario!
Home
Spray Foam Services
Overview & Guides
What is Spray Foam?Cost of Spray FoamOpen-Cell vs. Closed-CellOntario R-Value & Code Guide
Project Applications
Custom New HomesAdditions & RenovationsMuskoka Cottages & HomesExterior WallsInterior Ceiling Sound DampeningBasementsAttics & Roof DecksCrawl SpacesRim Joist HeadersGarages & Floors Over GarageCathedral CeilingsCantilevers & OverhangsUnder-Slab & Radiant FloorsCold RoomsRVs & VansSwimming Pools
Overview & Guides
Commercial SPF & Fire Coating OverviewCAN/ULC-S705.2 Code RulesCost of Spray Foam
Project Applications
Warehouse & IndustrialMetal BuildingsBarns & AgriculturalMulti-Unit BuildingsFlat Roof SystemsShipping ContainersSilos & Water Tanks
Overview & Guides
Our Sprayfoam ChemicalsCertifications & StandardsSpray Foam Knowledge Base
Fire Coatings
Overview & Guides
DC315 Fire Coating OverviewSprayfoam & DC315 Package (2-in-1)What is DC315 Fire Coating?Cost of DC315 Fire CoatingDC315 vs. Type X DrywallOntario 15-Min Thermal Barrier
Project Applications
Mechanical & Furnace RoomsExposed Basements & CrawlsAttached Garage CeilingsWarehouse Exposed Foam DecksUnvented Attics & Roof DecksRim Joists & Floor Headers
Overview & Guides
Intumescent Fire Coating OverviewULC 1–4 Hr Steel Fire Ratings
Project Applications
Structural Beams & ColumnsArchitectural Exposed Steel (AESS)Request Fire Spec & Quote
Overview & Guides
Cementitious Fireproofing OverviewULC 1–4 Hr Steel Fire Ratings
Project Applications
Metal Floor & Roof DecksCommercial Parkades & GaragesRequest Fire Spec & Quote
Overview & Guides
Our Fire Coating ChemicalsCertifications & StandardsFire Coating Knowledge Base
Ontario Service RegionsView All 50+ Cities →
Toronto & Central
Toronto · Etobicoke · North York · Scarborough
Peel Region
Mississauga · Brampton · Caledon
York Region
Vaughan · Markham · Richmond Hill · Newmarket
Halton Region
Oakville · Burlington · Milton · Halton Hills
Durham Region
Pickering · Whitby · Oshawa · Ajax · Clarington
Hamilton & Niagara
Hamilton · St. Catharines · Niagara Falls · Brantford
Kitchener / Waterloo / Guelph
Kitchener · Waterloo · Cambridge · Guelph
Barrie & Simcoe County
Barrie · Orillia · Innisfil · Collingwood
Muskoka & Cottage Country
Muskoka · Huntsville · Gravenhurst · Bracebridge
Windsor & Southwestern ON
Windsor · London · Sarnia · Chatham-Kent
Our WorkReviewsContact Us
More Info & Resources
› About Us› Certifications› All Services› Blog & Guides
We Serve GTA & Across Ontario!
Get My Pricing 647-333-3626
DIVISION 07 81 23 • ARCHITECTURAL EXPOSED STEEL (AESS) & MASS TIMBER
5.0 Google Rating·45+ Verified Reviews

Intumescent Fire Coating & Paint for Exposed Structural Steel
1 to 3 Hour CAN/ULC-S101 Ratings in Toronto & Ontario

2026 Quick Summary & Ballpark Cost

2026 Ontario Structural Intumescent Coating & Paint Cost Summary: Commercial thin-film intumescent fire coating and intumescent paint for structural steel (CSI Division 07 81 23) installed by Sprayfoam Solutions Toronto Inc. across Toronto, Mississauga, Brampton, Vaughan, Markham, Oakville, and across Ontario costs $6.50–$12.50/sq ft for 1-hour interior water-based ratings, $10.50–$18.50+/sq ft for 2-to-3-hour AESS or epoxy systems, and $4.95–$9.75/sq ft for fire-retardant wood and Mass Timber encapsulation. Our Caliber Certified (CAN/ULC-S705.2 Licensed) Installers and structural fireproofing crews apply Carboline Nullifire®, Sherwin-Williams Firetex®, AD Firefilm® & other ULC-listed structural fireproofing systems tested to CAN/ULC-S101, S102 & S146 and verified via ASTM E3108 digital magnetic DFT gauges. Call (647) 333-3626 or get a $250 Credit on Your Estimate — Check Your Price in 60 Seconds at spfsolutions.ca/price-chat (No Site Visit Required).

60-Sec Online Estimate
Calculate Estimate 647-333-3626
CAN/ULC-S101 & S124 CertifiedWSIB & Up to $10M Liability InsuredSigned QA Certificates
Intumescent Fire Coating for Structural Steel Toronto project 1Intumescent Fire Coating for Structural Steel Toronto project 2Intumescent Fire Coating for Structural Steel Toronto project 3Intumescent Fire Coating for Structural Steel Toronto project 4Intumescent Fire Coating for Structural Steel Toronto project 5
CAN/ULC-S101 Intumescent Fire Coating — Exposed Architectural Steel

Get Your Free Quote

Takes 10 seconds — we'll call you back.

Free Estimate No Obligation WSIB Cleared Licensed Caliber Certified
Call 647-333-3626 (7AM–9PM)
Have Blueprints or Steel Schedules? Email drawings to info@spfsolutions.ca for 24-hour fireproofing takeoffs & pricing.

Our Canadian Suppliers, Partners, Clients & Credentials

Canadian Owned logo
Mattamy Homes logo
WSIB Ontario logo
Treasure Hill logo
Huntsman logo
Minto logo
Carlisle logo
Daniels logo
Soprema logo
Geranium logo
Common Issues

What Architects, Engineers & Project Managers Face with Exposed Steel Fire Protection

Rough cementitious fireproofing or bulky gypsum column enclosures ruining the architect’s open-concept exposed structural steel (AESS) design
Inexperienced painters applying intumescent mastics with visible orange-peel, sags, or runs on feature lobby columns and atrium trusses
Incompatible shop primer or decorative topcoat voiding the CAN/ULC-S101 assembly listing and triggering a municipal occupancy red-tag
Incorrect W/D or A/P section-factor calculations causing severe under-build (failed DFT inspection) or costly material over-specification
Missing digital Elcometer Dry Film Thickness (DFT) logs per ASTM E3108 stalling third-party structural engineer sign-off
Exposed Glulam or Cross-Laminated Timber (CLT) commercial structures requiring certified CAN/ULC-S146 fire-retardant encapsulation
The Solution

Why Ontario Architects, Structural Engineers & General Contractors Specify Our Team

AESS Category 1 to 4 Smooth Architectural Finish in Any Colour

Applied with precision high-pressure airless plural equipment and finished with ULC-approved polyurethane topcoats matched to any RAL, Sherwin-Williams, or Benjamin Moore colour in matte, satin, or semi-gloss.

1 to 3 Hour CAN/ULC-S101 Steel & CAN/ULC-S146 Mass Timber Ratings

During a fire, thin-film intumescent coatings expand 15x to 50x into a dense insulating ceramic-carbon char that shields structural steel below its 538°C critical yield threshold for up to 3 hours.

Primer-to-Intumescent-to-Topcoat Compatibility Verification

Before spraying a single mil, we verify shop-primer chemistry and DFT against the manufacturer’s ULC Design listing (Z600 / X600 / BXUVc) so your 3-coat system passes engineering review without adhesion failure.

Digital Elcometer ASTM E3108 DFT Verification & Submittal Binder

Every structural member is mapped and logged with calibrated digital magnetic Dry Film Thickness (DFT) gauges per ASTM E3108, complete with batch numbers and environmental dew-point logs.

Intumescent Fire Coating for Structural Steel benefit 1
Intumescent Fire Coating for Structural Steel benefit 2
Intumescent Fire Coating for Structural Steel benefit 3
Intumescent Fire Coating for Structural Steel benefit 4

STRUCTURAL INTUMESCENT EXPERTS

Smooth AESS Category 1–4 Architectural Steel Finish
★★★★★5.0 Google Rating•55+ Verified Reviews•Serving Across Ontario
STEP 1: 60-SECOND PRICE CHECK
LOCK IN DIRECT CONTRACTOR PRICING

Fast Response & Quotes · No Commitment!

Tap to Select Your Project:
or call directly: 647-333-3626
VERIFIED, CERTIFIED & LISTED ON
Google5.0 ★ Verified
HomeStarsVerified Pro
Houzz ProListed Contractor
TrustedProsCanadian Directory
Caliber CertifiedCAN/ULC-S705.2
WSIB & CCMCOntario Cleared
Our Process

Our 4-Stage CSI Division 07 81 23 Thin-Film Intumescent Application Protocol

1

ULC Design & W/D (A/P) Section-Factor Schedule

We calculate exact W/D (wide-flange) and A/P (hollow HSS) section factors from your structural drawings and submit a member-by-member required Dry Film Thickness (DFT) schedule.

2

SSPC Surface Prep & Primer Compatibility Audit

Steel is inspected for SSPC-SP6 commercial blast cleanliness, solvent-wiped, and tested for shop-primer DFT and chemical compatibility. Incompatible or bare steel receives a ULC-listed tie-coat primer.

3

Multi-Pass High-Pressure Airless Intumescent Build

Our certified applicators spray controlled multi-coat passes of thin-film intumescent mastic, monitoring ambient humidity, steel temperature (>3°C above dew point), and wet mils on every pass.

4

ASTM E3108 Digital DFT Audit & Architectural Topcoat

Once cured intumescent DFT is verified with digital Elcometer magnetic gauges, we apply the ULC-approved decorative urethane topcoat and issue your signed engineering closeout binder.

Intumescent Fire Coating for Structural Steel project photo 1
Intumescent Fire Coating for Structural Steel project photo 2
Interactive ULC Structural Assemblies

CAN/ULC-S101 Structural Steel & Concrete Fireproofing Explorer

CAD ARCHITECTURAL CROSS-SECTIONStructural Beams & Columns
CORESTEEL
LAYER 01 — Wide-Flange W-Shape Steel Core✓ Held < 538°C Yield
3–5 MILPRIMER
LAYER 02 — SSPC Surface Prep & Bond InterfaceASTM E736 Verified
35x–50xCHAR SHIELD
LAYER 03 — Thin-Film Intumescent Fire Shield1-Hr to 4-Hr
900°C+ULC-S101
LAYER 04 — 900°C+ CAN/ULC-S101 Furnace ExposureStructural Collapse Prevented

* Under CAN/ULC-S101 fire exposure (900°C+), our fireproofing shield insulates the structural steel core below its critical 538°C (1,000°F) yield-loss threshold for 1 to 4 hours.

Wide-Flange W-Shape Structural Steel Columns & I-Beams

1-Hour to 4-Hour structural load-bearing steel protection preventing critical 538°C (1,000°F) yield-strength collapse under CAN/ULC-S101.

Division 07 81 00 — Cementitious Fireproofing (SFRM) Spec1/2" to 2-1/4" Isolatek Cafco® 300 / Blaze-Shield® II or GCP Monokote® MK-6® (15–22 lb/ft³) contour-sprayed to match member W/D section factor.
Division 07 81 23 — Thin-Film Intumescent Fire Coating Spec35 to 145 mils DFT Carboline Nullifire® / Thermo-Lag®, Sherwin-Williams Firetex® or AD Firefilm® III thin-film mastic over compatible primer.
Third-Party Field QA/QC & Engineer Verification ProtocolASTM E605 Thickness/Density + ASTM E736 Bond Strength (SFRM) • ASTM E3108 Digital Magnetic DFT Log (Intumescent) for engineer sign-off.
2026 INSTALLED STRUCTURAL FIREPROOFING RATE$6.50 – $15.50 / sq ft$4,500 – $28,000+ (Commercial Structural Scope) • Includes ULC & ASTM Submittal Package
Get My Price in 60s →
2026 Ontario Pricing & Code Specs

2026 Intumescent Fire Coating Cost Per Sq Ft for Structural Steel in Ontario

Installed commercial pricing by CAN/ULC-S101 hourly rating, Dry Film Thickness (DFT), and AESS finish grade.

1-HOUR WATER-BORNE AESS

1-Hour Water-Borne Architectural Steel Coating

$6.50 – $11.50
/ sq ft installed
  • 1-Hour CAN/ULC-S101 structural fire-resistance rating
  • Smooth AESS Category 2 / Category 3 architectural finish
  • Carboline Nullifire®, Sherwin-Williams Firetex® or AD Firefilm®
  • Includes ASTM E3108 digital Elcometer DFT logbook
Get My Price in 60s →
MOST POPULAR — 2-HOUR ARCHITECTURAL AESS

2-Hour Exposed Columns, Feature Atriums & Lobbies

$10.50 – $15.75
/ sq ft installed
  • 2-Hour CAN/ULC-S101 & Ontario Building Code Part 3 rating
  • Custom colour-matched topcoat (RAL / Benjamin Moore / SW)
  • Member-by-member W/D & A/P engineering submittal schedule
  • Includes 24-Hr Blueprint Take-Off & ULC Submittal Binder
Get My Price in 60s →
2–3 HR EPOXY & MASS TIMBER (S146)

2-Component Epoxy Intumescent & Mass Timber (S146)

$13.50 – $18.50+
/ sq ft installed
  • Up to 3-Hour CAN/ULC-S101 or CAN/ULC-S146 CLT protection
  • Weather-, washdown- & chemical-resistant 2-pack cure
  • Thermo-Lag® 3000, Chartek®, Firetex® M90 or Nullifire® SC902
  • Full third-party engineering QA/QC closeout package
Request Commercial Bid →
Structural Assembly & Rating ScopeTypical Dry Film Thickness (DFT)Approved Division 07 81 23 System2026 Cost Per Sq FtFinish Grade & Environment
1-Hour Interior Wide-Flange Beams & Decks25 – 55 mils DFT (By W/D Ratio)Firetex® FX6002 / Nullifire® / Firefilm® III$6.50 – $10.50 / sq ftAESS Cat 2/3 • Low-VOC Interior
1-Hour Hollow Structural Sections (HSS Columns)40 – 85 mils DFT (By A/P Ratio)Carboline Nullifire® / Firetex® FX9502$8.25 – $12.50 / sq ftAESS Cat 3/4 + Custom Topcoat
2-Hour Interior Structural Columns & Trusses65 – 135 mils DFT (Multi-Pass Build)Thermo-Lag® / Firetex® / AD Firefilm®$10.50 – $15.75 / sq ftAESS Cat 3/4 • High-Rise & Institutional
2-to-3 Hour Exterior / High-Humidity Epoxy Steel80 – 180+ mils DFT (2-Pack Epoxy)Nullifire® SC902 / Thermo-Lag® 3000 / Chartek®$13.50 – $18.50+ / sq ftWeatherproof Exterior / Aquatic / Industrial
Encapsulated Mass Timber / CLT / Glulam (S146)18 – 45 mils DFT (Clear or Pigmented)CAN/ULC-S146 & S102 Certified Systems$4.95 – $9.75 / sq ftOntario Building Code Tall Wood Compliance
Commercial Blueprint Take-Offs

Instant Commercial Project Estimate

Calculate Estimate 647-333-3626

2026 Ontario Building Code & CAN/ULC-S101 / S146 Intumescent Engineering Ledger

CSI DIVISION 07 81 23 • AESS & MASS TIMBER
CSI MasterFormat & Fire Endurance Standard
CSI Division 07 81 23 (Intumescent Fireproofing) • Tested to CAN/ULC-S101 & ASTM E119 for 1, 1.5, 2 & 3-Hour Structural Steel Ratings
Mass Timber & Tall Wood Standard
CAN/ULC-S146 ( Evaluation of Encapsulation Materials and Assemblies of Protection for Structural Timber Elements) & CAN/ULC-S102
Ontario Building Code Compliance
Ontario Building Code Division B Section 3.1.4 / 3.1.5, Subsection 3.2.2 (Structural Fire Resistance) & Encapsulated Mass Timber Construction (EMTC)
In-Place Dry Film Thickness (DFT) Standard
ASTM E3108 & SSPC-PA 2 Digital Magnetic Gauge Verification (Elcometer 456 calibrated logs across flanges, webs, and hollow faces)
Architectural Finish Standards (CISC / AESS)
Compliant with CISC Code of Standard Practice for Architecturally Exposed Structural Steel: AESS Category 1, Category 2, Category 3 & Category 4
Approved Intumescent Fire Coating Systems
Carboline Nullifire® SC902 / Thermo-Lag® 3000 / A/D Firefilm® III (ADFI SprayFilm), Sherwin-Williams Firetex® FX6002 / FX9502 / M90, Flame Control®, International® Chartek® / Interchar® & other ULC-listed structural fireproofing systems
Substrate Prep & 3-Coat Compatibility
SSPC-SP6 Commercial Blast + ULC-Listed Epoxy/Zinc Primer (< 3–5 mils DFT) + Intumescent Basecoat + Approved Polyurethane Topcoat
Closeout & Occupancy Documentation
Member-by-Member W/D & A/P Schedule, Primer Compatibility Sign-Off, Dew-Point Logs, ASTM E3108 DFT Report & Engineering Submittal Binder
Expert Insights

In-Depth: Intumescent Fire Coating for Structural Steel

5 min read

MATCHING INTUMESCENT FINISH TO CISC AESS CATEGORIES

We align our surface preparation, airless spray tip selection, and inter-coat sanding with the Canadian Institute of Steel Construction (CISC) AESS Categories:

AESS CategoryViewing DistanceTypical Ontario ApplicationOur Intumescent Finish Protocol
AESS 1 (Basic)> 6 metres (20 ft)High warehouse/retail ceilings & trussesUniform high-pressure airless pass
AESS 2 (Feature)> 6 metres (20 ft)Atrium roof canopies, arenas & concoursesMulti-pass fine-tip airless + urethane topcoat
AESS 3 (Close-View)≤ 6 metres (20 ft)Office lobbies, universities, airports & columnsSkim/sand inter-coat profile + satin/matte topcoat
AESS 4 (Showcase)Touch DistanceSignature architectural reception & feature stairsLevel-4 smooth automotive-style architectural finish

THE ULC-CERTIFIED 3-COAT INTUMESCENT ASSEMBLY

Every structural intumescent installation under CAN/ULC-S101 is an engineered 3-part chemical system:

  • Layer 1 — Qualified Anti-Corrosive Primer (2–4 mils DFT): Phenalkamine epoxy, polyamide epoxy, or zinc-rich primer tested specifically for high-temperature char retention over SSPC-SP6 blasted steel.
  • Layer 2 — Intumescent Basecoat Mastic (25–160+ mils DFT): Contains ammonium polyphosphate (acid catalyst), pentaerythritol (carbon donor), and melamine (blowing agent) that expand up to 50x at 200°C–250°C.
  • Layer 3 — Decorative & Environmental Topcoat (2–4 mils DFT): ULC-tested polyurethane or silicone-alkyd finish coat sealing against humidity, UV, and abrasion in your exact architectural colour.

DIGITAL ELCOMETER DFT VERIFICATION & SUBMITTAL LOGS

Architects and third-party inspection engineers require mathematical proof that every structural member meets its ULC Design assembly thickness:

  • Shop Primer Baseline Subtracted: We measure and record existing shop-primer DFT before intumescent application so net intumescent build is 100% accurate.
  • Statistical Bay & Flange Mapping (SSPC-PA 2 / ASTM E3108): Digital magnetic readings taken across webs, inner/outer flanges, and HSS faces.
  • Complete Closeout Binder: Includes ULC Design certificates, batch-lot numbers, ambient temp/RH/dew-point logs, and signed DFT reports for immediate municipal occupancy sign-off.

WHEN TO SPECIFY DIVISION 07 81 23 vs. DIVISION 07 81 00

Comparison FactorThin-Film Intumescent (07 81 23)Cementitious SFRM (07 81 00)
Visual AppearanceSmooth architectural paint finish (any colour)Textured, fibrous grey/tan acoustic plaster
Applied ThicknessThin-film: 0.025" – 0.160" (25–160 mils DFT)Thick build: 3/8" – 2-1/4" (375–2,250 mils)
2026 Installed Cost$6.50 – $18.50+ / sq ft$2.50 – $6.75 / sq ft
Best ApplicationExposed AESS columns, lobbies, atriums & trussesConcealed steel decks, shafts & parkades

Many commercial projects combine both systems to optimize budget! Calculate your hybrid structural fireproofing estimate in 60 seconds (/price-chat).

FAQ

Frequently Asked Questions

How much does thin-film intumescent fire coating for structural steel cost per sq ft in Ontario in 2026?
In 2026 across Toronto, Mississauga, Brampton, Vaughan, Markham, Oakville, and across Ontario, commercial thin-film intumescent fire coating (CSI Division 07 81 23) for 1-hour and 2-hour CAN/ULC-S101 AESS structural steel installed by Sprayfoam Solutions Toronto Inc. costs $6.50 to $11.50 per sq ft for 1-hour interior water-borne applications, $10.50 to $15.75 per sq ft for 2-hour architectural AESS assemblies with custom colour topcoats, and $13.50 to $18.50+ per sq ft for 2-to-3-hour fast-cure hybrid or 2-component epoxy exterior systems using Carboline Nullifire®, Sherwin-Williams Firetex® & other ULC-listed structural fireproofing systems applied by our Caliber Certified (CAN/ULC-S705.2 Licensed) Installers and fireproofing teams. Call (647) 333-3626 or get a $250 Credit on Your Estimate — Check Your Price in 60 Seconds at spfsolutions.ca/price-chat (No Site Visit Required).
What is the difference between Structural Steel Intumescent Coating (CAN/ULC-S101) and DC315 (CAN/ULC-S124)?
Structural steel thin-film intumescent coatings (Division 07 81 23) are tested under CAN/ULC-S101 at high dry film builds (25 to 180+ mils DFT) to keep load-bearing steel columns, W-beams, and trusses below their 538°C collapse temperature for 1 to 3 hours. IFTI DC315® (/fire-coating-dc315) is tested under CAN/ULC-S124 at 12–14 mils DFT specifically as a 15-minute thermal barrier over spray polyurethane foam insulation. Our certified crews install both systems.
Why do Hollow Structural Sections (HSS columns) require thicker intumescent coating than W-shape I-beams?
Because hollow round or square HSS columns are heated from all four exterior sides and lack an interior web mass to absorb heat, their Area-to-Perimeter (A/P) section factor heats up faster in a CAN/ULC-S101 furnace test than a wide-flange W-shape beam of equivalent weight. Our estimators calculate exact W/D and A/P ratios for every steel member on your structural drawings so each column and beam receives its exact ULC-certified mil build.
Can you topcoat intumescent fireproofing in custom architectural colours like matte black, white, or RAL shades?
Yes. Once our certified applicators verify that the cured intumescent basecoat meets the required Dry Film Thickness (DFT) via digital Elcometer gauges, we spray a ULC-approved polyurethane or acrylic decorative topcoat in any custom RAL, Sherwin-Williams, or Benjamin Moore colour (matte, satin, or semi-gloss) to match the architect’s exact AESS design intent.
Why does shop-primer compatibility matter before applying intumescent fire coating?
During a building fire, an intumescent coating swells up to 50x its thickness and exerts strong pull forces on the underlying steel primer. If the structural steel fabricator applied an unapproved alkyd shop primer or applied primer too thickly (> 5 mils DFT), the intumescent char can delaminate during a fire—and third-party inspectors will reject the assembly. We audit shop primer chemistry and adhesion before application and apply a ULC-approved tie-coat primer whenever required.
How is thin-film intumescent fireproofing inspected for municipal occupancy in Ontario?
Unlike cementitious SFRM (which uses pin gauges under ASTM E605), thin-film intumescent coatings are inspected under ASTM E3108 and SSPC-PA 2 using calibrated digital magnetic Dry Film Thickness (DFT) gauges (such as the Elcometer 456). We record primer DFT, intumescent DFT, and topcoat DFT for every beam and column so your third-party engineer and municipal building official sign off immediately.
Which structural intumescent fire coating brands do you install in Ontario?
We install all leading ULC-listed Division 07 81 23 intumescent systems in Canada, including Carboline Nullifire® SC902 / Thermo-Lag® 3000 / A/D Firefilm® III (ADFI SprayFilm), Sherwin-Williams Firetex® FX6002 / FX9502 / M90, Flame Control®, International® Chartek® / Interchar® & other ULC-listed structural fireproofing systems.
Do you also apply fire-retardant coatings to Mass Timber, CLT, and Glulam structures?
Yes. For commercial Mass Timber, Cross-Laminated Timber (CLT), and Glulam beams requiring flame-spread reduction (CAN/ULC-S102) or encapsulation ratings (CAN/ULC-S146) under the Ontario Building Code, we apply both clear architectural intumescent varnishes and pigmented fire-retardant coatings.
Commercial Blueprint Take-Offs

Instant Commercial Project Estimate

Calculate Estimate 647-333-3626
2026 Ontario Guides & Resources

Related Intumescent Fire Coating for Structural Steel Cost & Building Code Guides

Structural Steel11 min read

Cementitious vs. Intumescent Fireproofing in Ontario (2026 Cost & ULC Guide)

Side-by-side 2026 engineering comparison of Division 07 81 23 thin-film intumescent coatings vs. Division 07 81 00 cementitious SFRM.

Read Full 2026 Guide
Intumescent Tech10 min read

IFTI DC315 Intumescent Fire Coating Guide: CAN/ULC-S124 Explained

Technical deep-dive into intumescent char expansion physics, wet/dry film thickness (WFT/DFT), and Ontario fire code sign-offs.

Read Full 2026 Guide
2026 Cost9 min read

DC315 Fire Coating Cost Per Sq Ft in Ontario (2026 Pricing)

Transparent 2026 per-square-foot pricing for 15-minute thermal barriers and commercial intumescent fire protection across the GTA.

Read Full 2026 Guide
Building Code10 min read

How to Fireproof Spray Foam & Structural Assemblies in Ontario

Everything Ontario architects, builders, and property managers need to know to pass municipal fire and building permit inspections.

Read Full 2026 Guide

Proof of Performance

Trusted by Ontario's top builders, general contractors & homeowners.

Certified Installation & On-Time Delivery

5.0
(45+ Google Reviews)

“We had 20,000 sq ft of our logistics warehouse insulated with closed-cell spray foam. The building condensation is completely gone. Their commercial rig handled the project in just three days without interrupting our daily operations.”

Amit P.

Mississauga, ON

Facilities DirectorCommercialWarehouse Insulation

“They insulated a retail commercial building envelope for us. High-performance closed-cell foam acted as both insulation and vapor barrier. Excellent scheduling and pass on code inspection. Highly professional.”

Rajesh S.

Etobicoke, Toronto

General ContractorCommercialCommercial Spray Foam

“Used them for a multi-unit commercial project. They applied closed-cell spray foam on metal stud walls. Passed building code on the first inspection. Clean framing and no overspray. Excellent partner.”

Priya K.

Vaughan, ON

BuilderCommercialOffice Building Insulation

“Critical temperature control was required for our food distribution warehouse. They sprayed closed-cell foam on the ceiling and walls. Amazing condensation control and thermal barrier. Professional commercial crew.”

Muhammad A.

Brampton, ON

Facilities DirectorCommercialCold Storage Spray Foam

“We hired them to insulate a large steel commercial building. The closed-cell spray foam bonds perfectly to metal panels, stopping rust and drafts. Excellent WSIB-compliant, licensed crew.”

Fatima Z.

Markham, ON

Project ManagerCommercialMetal Building Insulation

“They sprayed our large farm workshop and barn walls. Condensation was ruining our equipment. Now the barn is draft-free and dry. Great commercial rates and top quality. Highly recommended.”

Vikram M.

Barrie, ON

Project ManagerCommercialAgricultural Spray Foam

“We use their commercial services for all our industrial buildings. Their rigs are top-of-the-line, and their installers are Caliber Certified (CAN/ULC-S705.2 licensed). Passed building inspections first try.”

Rohan D.

Hamilton, ON

BuilderCommercialCommercial Spray Foam

“Insulated a commercial property crawl space to stop drafts rising into offices. Polyurethane closed-cell foam was applied flawlessly. Punctual crew, WSIB insured, $5M liability coverage. Highly recommended.”

Tariq H.

Oakville, ON

Property ManagerCommercialCommercial Crawl Space

“Professional warehouse insulation project. They covered all our stock with plastic sheeting before spraying. Clean, code-compliant, and on-schedule. Our HVAC energy bills dropped by 35%.”

Yasmin R.

Pickering, ON

Facilities DirectorCommercialWarehouse Insulation

“Hired them to fix condensation in an industrial steel warehouse. Closed-cell spray foam solved the problem completely and added structural rigidity to the metal siding. Outstanding service.”

Sanjay G.

Kitchener, ON

General ContractorCommercialMetal Building Insulation

“Insulated four exterior industrial storage tanks using CCMC-approved closed-cell polyurethane foam. The thermal performance is exceptional. Safe mobilization, certified crews, and zero safety issues.”

Anjali V.

London, ON

Facilities DirectorCommercialSilo & Tank Insulation

“We needed custom shipping containers insulated for mobile office use. They sprayed 2 inches of closed-cell foam on the interior walls. No condensation, perfectly flat finish. Passed inspection easily.”

Chen W.

Toronto Port, Toronto

Project ManagerCommercialShipping Container Insulation

“Hired them to insulate a multi-story apartment building renovation. Spanning five floors, they completed the wall and floor assemblies on schedule. Professional, fully insured, and CCMC certified.”

Mei L.

Mississauga, ON

Property ManagerCommercialMulti-Unit Residential Insulation

“Excellent commercial insulation partner. We use them for all our steel-frame developments. Their high-output mobile rigs are fast, and the foam thickness is highly consistent. Excellent rates.”

Wei Z.

Vaughan, ON

General ContractorCommercialCommercial Spray Foam

“They insulated our older commercial warehouse ceiling. Closed-cell spray foam sealed all the deck joints and stopped winter drafts. We noticed a major reduction in gas bills.”

Ying H.

Brampton, ON

Facilities DirectorCommercialWarehouse Retrofit

“Hired Sprayfoam Solutions to restore our warehouse roof using a hybrid flat roof spray foam and silicone roof coating. No tear-off was required, saving us over $40,000 compared to a traditional roof replacement. The roof is 100% waterproof and reflects heat perfectly.”

Jun Y.

North York, Toronto

Facilities DirectorCommercialFlat Roof Spray Foam & Coating

“Our commercial flat roof was constantly leaking. They applied high-density spray foam and a high-solids silicone coating. It created a seamless, ponding-water resistant membrane. The project was completed on budget with zero downtime for our tenants.”

Linh N.

Mississauga, ON

Property ManagerCommercialFlat Roof Restoration

“Saved our commercial roof without a costly tear-off. They repaired the leaks and applied a reflective silicone coating. Rooftop temperatures dropped significantly, lowering our summer AC costs. Excellent service.”

Jin S.

Vaughan, ON

Facilities DirectorCommercialSilicone Roof Coating

“Outstanding roof restoration project. They applied 3lb high-density spray foam directly over our old membrane. Sealed every roof penetration perfectly. Excellent certified crew, WSIB insured.”

Min-Ji K.

Brampton, ON

Project ManagerCommercialCommercial Flat Roof

“Professional flat roof restoration. Seamless foam and silicone coating has stopped all leaks and significantly improved the building insulation. Professional, licensed team, and competitive pricing.”

Hao T.

Markham, ON

Property ManagerCommercialFlat Roof Restoration

“Great flat roof coating service. They performed a thermal scan to locate wet insulation, replaced those sections, and coated the roof with reflective silicone. 100% leak-proof and energy efficient.”

Raymond C.

Oakville, ON

Facilities DirectorCommercialSilicone Roof Coating

“Insulated and waterproofed our industrial plaza flat roof. Seamless high-density foam stops drafts and water leaks in one shot. Certified installers using CCMC-approved roofing systems.”

Kevin C.

Hamilton, ON

Project ManagerCommercialFlat Roof Spray Foam

“Professional, certified crews. They did a marvelous job applying silicone coating on our warehouse flat roof. Complete ponding water resistance and 20-year durability. Excellent work.”

Steven B.

Barrie, ON

Facilities DirectorCommercialRoof Silicone Coating

“We have used them for two flat roof restorations now. High-density spray foam followed by white reflective silicone. Tenants reported immediate comfort improvements. No leaks, highly recommended.”

Deborah D.

Oshawa, ON

Property ManagerCommercialCommercial Roof Restoration

“Restored our retail store flat roof without interrupting business. Seamless spray foam and silicone coating has survived two harsh winters with zero issues. Great warranties and WSIB insured.”

Edward M.

Kitchener, ON

Facilities DirectorCommercialFlat Roof Restoration

“Excellent roof restoration service. Thermal scan was done first to ensure no wet insulation was covered. The silicone coating application was very clean with no overspray on surrounding cars.”

Stephanie L.

London, ON

Project ManagerCommercialSilicone Roof Coating

“High-density polyurethane foam and reflective coating applied on our manufacturing facility roof. Lowered our cooling costs by 20% last summer. Excellent service, clean, and highly professional.”

Ronald K.

Vaughan, ON

Facilities DirectorCommercialFlat Roof Spray Foam

“We needed a certified 15-minute thermal barrier for a large commercial permit. Their DC315 application was flawlessly done, meeting all Building Code compliance standards on the first inspection. They provided full wet film thickness documentation.”

Rebecca P.

Scarborough, Toronto

General ContractorCommercialDC315 Fire Coating

“Highest rated fireproofing team in the GTA. They arrived within 48 hours for a CAN/ULC-S124 compliant intumescent coating project in a basement suite. The documentation provided was exactly what the inspector needed.”

Anthony G.

Mississauga, ON

General ContractorResidentialSpray Foam & DC315

“We use Sprayfoam Solutions for all our exposed spray foam projects. They apply the closed-cell foam and the DC315 fire coating on the same day—one crew, one mobilization. Saves time and framing stays clean.”

Laura J.

Vaughan, ON

BuilderResidentialDC315 Thermal Barrier

“Highly professional DC315 intumescent coating application on exposed spray foam in our mechanical rooms. The crew verified wet film thickness (WFT) continuously and left a spotless workspace. Passed inspection.”

Albert N.

Brampton, ON

Project ManagerCommercialDC315 Fire Coating

“Ontario Building Code requires a thermal barrier over exposed basement spray foam. Their DC315 application was fast and certified. They provided the CCMC evaluation report immediately for our permit file.”

Cynthia O.

Markham, ON

BuilderResidentialThermal Barrier Code Compliance

“They applied DC315 fire coating over exposed spray foam in an attic storage area. Passed building code inspection first try. Certified applicator, WSIB insured, and same-week scheduling. Excellent.”

Ryan S.

Oakville, ON

General ContractorCommercialDC315 Fire Coating

“We hire them for all our legal duplex conversions. They spray the closed-cell insulation and follow up with DC315 intumescent coating for code-compliant fire safety. Fast, neat, and highly professional.”

Kathleen D.

Hamilton, ON

BuilderResidentialSpray Foam & Fire Coating

“Excellent experience. Certified DC315 application over foam in a commercial mechanical loft. Passed inspection easily. They provided a full documentation package with CCMC evaluation reports.”

Justin F.

Barrie, ON

General ContractorCommercialDC315 Thermal Barrier

“We needed a 15-minute thermal barrier in an unfinished basement remodel. They sprayed the closed-cell foam and followed up with code-compliant DC315 fire coating. Passed building permit inspection.”

Amy W.

Kitchener, ON

BuilderResidentialDuplex Code Compliance

“Certified intumescent fire paint over spray foam. The application was clean with no overspray on steel beams or electrical runs. The crew was professional, polite, and fully WSIB insured.”

Brandon H.

London, ON

General ContractorCommercialDC315 Fire Coating

“Passed our building inspection with flying colors. The DC315 application met the 15-minute thermal barrier requirements under the Ontario building code. Highly professional service and documentation.”

Shirley A.

Oshawa, ON

General ContractorCommercialExposed Foam Fire Code

“Excellent duplex conversion project. They applied closed-cell spray foam and DC315 fire coating in the mechanical room. Outstanding coordination, clean work, and complete code compliance.”

Frank T.

East York, Toronto

BuilderResidentialDC315 Thermal Barrier

“Professional fire barrier application. They applied DC315 over exposed polyurethane spray foam. Certified thickness, verified WFT, and flawless documentation for our project engineers.”

Angela E.

Mississauga, ON

General ContractorCommercialDC315 Fire Coating

“Certified DC315 applicator. They sprayed our custom home crawl space foam and protected the space with ignition barrier coating. Neat, prompt, and completely compliant with local building codes.”

Gregory M.

Vaughan, ON

BuilderResidentialSpray Foam & Fire Paint

“They did a fantastic job with DC315 intumescent coating over foam in our commercial kitchen expansion. CCMC approved, passed municipal inspection first try. Professional and clean crews.”

Anna L.

Oakville, ON

General ContractorCommercialDC315 Thermal Barrier

“Hired them to apply cementitious fireproofing on the structural steel beams of a new commercial parking garage. Professional spray application of SFRM to code thickness. Passed third-party inspections first try with zero thickness issues.”

Fatima Z.

York, Toronto

General ContractorCommercialCementitious Fireproofing

“Excellent structural steel fireproofing service. They sprayed low-density cementitious material on the metal deck and columns. Crew worked safe at heights, fully WSIB compliant, and completed the job on schedule.”

Vikram M.

Mississauga, ON

BuilderCommercialCementitious Fireproofing

“We hire them for all our mid-rise commercial steel projects. Their crews apply cementitious fire resistive material (SFRM) to exact building code thickness. Prompt service, great prices, and fully insured.”

Rohan D.

Vaughan, ON

Project ManagerCommercialStructural Steel Fireproofing

“Passed our building inspection. They applied cementitious fire protection on steel columns in our new industrial building. Professional prep, excellent density control, and spotless cleanup. Great contractor.”

Tariq H.

Brampton, ON

BuilderCommercialCementitious Fireproofing

“Professional SFRM fireproofing contractor. They sprayed structural steel beams to meet 2-hour rating requirements. They provided complete technical documents and W/D ratio thickness charts for local inspectors.”

Yasmin R.

Markham, ON

General ContractorCommercialCommercial Fireproofing

“Sprayed cementitious fireproofing on steel deck and joists for our school project. Outstanding team, certified fireproofing crews, WSIB insured. They completed the work on schedule, passing inspection easily.”

Sanjay G.

Oakville, ON

BuilderCommercialStructural Steel Fireproofing

“Reliable commercial fireproofing contractor. Applied cementitious spray on structural steel beams in our new retail development. Excellent price, fast application, and zero scheduling delays.”

Anjali V.

Hamilton, ON

Project ManagerCommercialCementitious Fireproofing

“We needed medium-density cementitious fireproofing for a semi-exposed commercial parking deck. They applied the Monokote SFRM flawlessly. Passed thickness inspection first try. Outstanding crew.”

Chen W.

Barrie, ON

General ContractorCommercialParking Garage Fireproofing

“Great experience. They sprayed structural steel columns on our new commercial warehouse. The application thickness met all building code requirements. Highly professional, certified crews.”

Mei L.

Whitby, ON

BuilderCommercialCommercial Fireproofing

“Hired them to fireproof steel framing in a commercial office. They applied cementitious spray to exact specification and cleaned up every scrap of overspray. Passed inspections without issues.”

Wei Z.

Kitchener, ON

Project ManagerCommercialStructural Steel Fireproofing

“Highly professional SFRM application. They worked around our other trades to fireproof structural columns on schedule. Clean work, CCMC approved materials, WSIB insured. Will use again.”

Ying H.

London, ON

General ContractorCommercialCementitious Fireproofing

“We hired Sprayfoam Solutions to apply thin-film intumescent fire coating on architecturally exposed structural steel (AESS) beams in our new corporate headquarters lobby. The finish is incredibly smooth and looks like paint, yet provides a certified 2-hour fire rating. Passed third-party DFT testing first try.”

Jun Y.

Downtown Toronto, Toronto

General ContractorCommercialIntumescent Steel Fireproofing

“Outstanding thin-film intumescent application on exposed steel columns in a retail space. The architects wanted the steel visible, so cementitious was out. They did a marvelous job, primer and topcoat were perfectly applied.”

Linh N.

Mississauga, ON

BuilderCommercialIntumescent Fire Protection

“They applied intumescent coating on exposed timber beams in a heritage building restoration. Achieved code fire rating while preserving the historical wooden structure. Excellent workmanship, clean and professional.”

Jin S.

The Annex, Toronto

General ContractorCommercialAESS Fireproofing

“Excellent intumescent application for exposed structural steel in a commercial office. They verified dry film thickness (DFT) meticulously and provided complete documentation for the fire marshal. Passed inspection.”

Min-Ji K.

Vaughan, ON

Project ManagerCommercialIntumescent Steel Coating

“Hired them to apply intumescent fireproofing on steel structural columns in a new restaurant. Smooth finish, CAN/ULC-S101 compliant, and completed on schedule. Great contractor and pricing.”

Hao T.

Brampton, ON

BuilderCommercialThin-Film Intumescent

“Professional intumescent coating application on steel framing. Architects specified exposed steel look. This thin-film coating expanded perfectly in fire testing. Certified crews, WSIB insured, $5M liability.”

Raymond C.

Markham, ON

General ContractorCommercialAESS Fire Protection

“We needed a 1-hour fire rating on exposed structural steel columns. They applied thin-film water-based intumescent. Excellent smooth paint-like finish, on schedule, and zero issues with building code inspector.”

Kevin C.

Oakville, ON

Project ManagerCommercialIntumescent Fireproofing

“Great thin-film intumescent coating service. They worked weekends to prevent disrupting our ongoing commercial tenant operations. The finish looks spectacular and meets building code. Highly recommended.”

Raymond K.

Hamilton, ON

BuilderCommercialIntumescent Steel Coating

“They applied intumescent fire paint on exposed structural steel columns in a new school library. Smooth AESS finish, WSIB insured, same-week scheduling. Excellent coordination with our drywallers.”

Brenda C.

Barrie, ON

General ContractorCommercialIntumescent Fire Protection

“Professional thin-film intumescent application on exposed steel rafters. Excellent dry film thickness (DFT) reports provided. Passed building inspections first try. Best fireproofing contractor.”

Samuel G.

Pickering, ON

BuilderCommercialAESS Fireproofing

“They sprayed thin-film intumescent over steel framing in our commercial renovation. Cured quickly and was ready for topcoat in 24 hours. Certified crews, outstanding workmanship and pricing.”

Pamela R.

Kitchener, ON

General ContractorCommercialIntumescent Steel Coating

“Insulated and fireproofed historical timber beams in a heritage loft conversion. Thin-film intumescent kept the wood visible while meeting the 1-hour fire safety code. Outstanding workmanship.”

Benjamin B.

London, ON

BuilderCommercialHeritage Fire Protection

“We had 20,000 sq ft of our logistics warehouse insulated with closed-cell spray foam. The building condensation is completely gone. Their commercial rig handled the project in just three days without interrupting our daily operations.”

Amit P.

Mississauga, ON

Facilities DirectorCommercialWarehouse Insulation

“They insulated a retail commercial building envelope for us. High-performance closed-cell foam acted as both insulation and vapor barrier. Excellent scheduling and pass on code inspection. Highly professional.”

Rajesh S.

Etobicoke, Toronto

General ContractorCommercialCommercial Spray Foam

“Used them for a multi-unit commercial project. They applied closed-cell spray foam on metal stud walls. Passed building code on the first inspection. Clean framing and no overspray. Excellent partner.”

Priya K.

Vaughan, ON

BuilderCommercialOffice Building Insulation

“Critical temperature control was required for our food distribution warehouse. They sprayed closed-cell foam on the ceiling and walls. Amazing condensation control and thermal barrier. Professional commercial crew.”

Muhammad A.

Brampton, ON

Facilities DirectorCommercialCold Storage Spray Foam

“We hired them to insulate a large steel commercial building. The closed-cell spray foam bonds perfectly to metal panels, stopping rust and drafts. Excellent WSIB-compliant, licensed crew.”

Fatima Z.

Markham, ON

Project ManagerCommercialMetal Building Insulation

“They sprayed our large farm workshop and barn walls. Condensation was ruining our equipment. Now the barn is draft-free and dry. Great commercial rates and top quality. Highly recommended.”

Vikram M.

Barrie, ON

Project ManagerCommercialAgricultural Spray Foam

“We use their commercial services for all our industrial buildings. Their rigs are top-of-the-line, and their installers are Caliber Certified (CAN/ULC-S705.2 licensed). Passed building inspections first try.”

Rohan D.

Hamilton, ON

BuilderCommercialCommercial Spray Foam

“Insulated a commercial property crawl space to stop drafts rising into offices. Polyurethane closed-cell foam was applied flawlessly. Punctual crew, WSIB insured, $5M liability coverage. Highly recommended.”

Tariq H.

Oakville, ON

Property ManagerCommercialCommercial Crawl Space

“Professional warehouse insulation project. They covered all our stock with plastic sheeting before spraying. Clean, code-compliant, and on-schedule. Our HVAC energy bills dropped by 35%.”

Yasmin R.

Pickering, ON

Facilities DirectorCommercialWarehouse Insulation

“Hired them to fix condensation in an industrial steel warehouse. Closed-cell spray foam solved the problem completely and added structural rigidity to the metal siding. Outstanding service.”

Sanjay G.

Kitchener, ON

General ContractorCommercialMetal Building Insulation

“Insulated four exterior industrial storage tanks using CCMC-approved closed-cell polyurethane foam. The thermal performance is exceptional. Safe mobilization, certified crews, and zero safety issues.”

Anjali V.

London, ON

Facilities DirectorCommercialSilo & Tank Insulation

“We needed custom shipping containers insulated for mobile office use. They sprayed 2 inches of closed-cell foam on the interior walls. No condensation, perfectly flat finish. Passed inspection easily.”

Chen W.

Toronto Port, Toronto

Project ManagerCommercialShipping Container Insulation

“Hired them to insulate a multi-story apartment building renovation. Spanning five floors, they completed the wall and floor assemblies on schedule. Professional, fully insured, and CCMC certified.”

Mei L.

Mississauga, ON

Property ManagerCommercialMulti-Unit Residential Insulation

“Excellent commercial insulation partner. We use them for all our steel-frame developments. Their high-output mobile rigs are fast, and the foam thickness is highly consistent. Excellent rates.”

Wei Z.

Vaughan, ON

General ContractorCommercialCommercial Spray Foam

“They insulated our older commercial warehouse ceiling. Closed-cell spray foam sealed all the deck joints and stopped winter drafts. We noticed a major reduction in gas bills.”

Ying H.

Brampton, ON

Facilities DirectorCommercialWarehouse Retrofit

“Hired Sprayfoam Solutions to restore our warehouse roof using a hybrid flat roof spray foam and silicone roof coating. No tear-off was required, saving us over $40,000 compared to a traditional roof replacement. The roof is 100% waterproof and reflects heat perfectly.”

Jun Y.

North York, Toronto

Facilities DirectorCommercialFlat Roof Spray Foam & Coating

“Our commercial flat roof was constantly leaking. They applied high-density spray foam and a high-solids silicone coating. It created a seamless, ponding-water resistant membrane. The project was completed on budget with zero downtime for our tenants.”

Linh N.

Mississauga, ON

Property ManagerCommercialFlat Roof Restoration

“Saved our commercial roof without a costly tear-off. They repaired the leaks and applied a reflective silicone coating. Rooftop temperatures dropped significantly, lowering our summer AC costs. Excellent service.”

Jin S.

Vaughan, ON

Facilities DirectorCommercialSilicone Roof Coating

“Outstanding roof restoration project. They applied 3lb high-density spray foam directly over our old membrane. Sealed every roof penetration perfectly. Excellent certified crew, WSIB insured.”

Min-Ji K.

Brampton, ON

Project ManagerCommercialCommercial Flat Roof

“Professional flat roof restoration. Seamless foam and silicone coating has stopped all leaks and significantly improved the building insulation. Professional, licensed team, and competitive pricing.”

Hao T.

Markham, ON

Property ManagerCommercialFlat Roof Restoration

“Great flat roof coating service. They performed a thermal scan to locate wet insulation, replaced those sections, and coated the roof with reflective silicone. 100% leak-proof and energy efficient.”

Raymond C.

Oakville, ON

Facilities DirectorCommercialSilicone Roof Coating

“Insulated and waterproofed our industrial plaza flat roof. Seamless high-density foam stops drafts and water leaks in one shot. Certified installers using CCMC-approved roofing systems.”

Kevin C.

Hamilton, ON

Project ManagerCommercialFlat Roof Spray Foam

“Professional, certified crews. They did a marvelous job applying silicone coating on our warehouse flat roof. Complete ponding water resistance and 20-year durability. Excellent work.”

Steven B.

Barrie, ON

Facilities DirectorCommercialRoof Silicone Coating

“We have used them for two flat roof restorations now. High-density spray foam followed by white reflective silicone. Tenants reported immediate comfort improvements. No leaks, highly recommended.”

Deborah D.

Oshawa, ON

Property ManagerCommercialCommercial Roof Restoration

“Restored our retail store flat roof without interrupting business. Seamless spray foam and silicone coating has survived two harsh winters with zero issues. Great warranties and WSIB insured.”

Edward M.

Kitchener, ON

Facilities DirectorCommercialFlat Roof Restoration

“Excellent roof restoration service. Thermal scan was done first to ensure no wet insulation was covered. The silicone coating application was very clean with no overspray on surrounding cars.”

Stephanie L.

London, ON

Project ManagerCommercialSilicone Roof Coating

“High-density polyurethane foam and reflective coating applied on our manufacturing facility roof. Lowered our cooling costs by 20% last summer. Excellent service, clean, and highly professional.”

Ronald K.

Vaughan, ON

Facilities DirectorCommercialFlat Roof Spray Foam

“We needed a certified 15-minute thermal barrier for a large commercial permit. Their DC315 application was flawlessly done, meeting all Building Code compliance standards on the first inspection. They provided full wet film thickness documentation.”

Rebecca P.

Scarborough, Toronto

General ContractorCommercialDC315 Fire Coating

“Highest rated fireproofing team in the GTA. They arrived within 48 hours for a CAN/ULC-S124 compliant intumescent coating project in a basement suite. The documentation provided was exactly what the inspector needed.”

Anthony G.

Mississauga, ON

General ContractorResidentialSpray Foam & DC315

“We use Sprayfoam Solutions for all our exposed spray foam projects. They apply the closed-cell foam and the DC315 fire coating on the same day—one crew, one mobilization. Saves time and framing stays clean.”

Laura J.

Vaughan, ON

BuilderResidentialDC315 Thermal Barrier

“Highly professional DC315 intumescent coating application on exposed spray foam in our mechanical rooms. The crew verified wet film thickness (WFT) continuously and left a spotless workspace. Passed inspection.”

Albert N.

Brampton, ON

Project ManagerCommercialDC315 Fire Coating

“Ontario Building Code requires a thermal barrier over exposed basement spray foam. Their DC315 application was fast and certified. They provided the CCMC evaluation report immediately for our permit file.”

Cynthia O.

Markham, ON

BuilderResidentialThermal Barrier Code Compliance

“They applied DC315 fire coating over exposed spray foam in an attic storage area. Passed building code inspection first try. Certified applicator, WSIB insured, and same-week scheduling. Excellent.”

Ryan S.

Oakville, ON

General ContractorCommercialDC315 Fire Coating

“We hire them for all our legal duplex conversions. They spray the closed-cell insulation and follow up with DC315 intumescent coating for code-compliant fire safety. Fast, neat, and highly professional.”

Kathleen D.

Hamilton, ON

BuilderResidentialSpray Foam & Fire Coating

“Excellent experience. Certified DC315 application over foam in a commercial mechanical loft. Passed inspection easily. They provided a full documentation package with CCMC evaluation reports.”

Justin F.

Barrie, ON

General ContractorCommercialDC315 Thermal Barrier

“We needed a 15-minute thermal barrier in an unfinished basement remodel. They sprayed the closed-cell foam and followed up with code-compliant DC315 fire coating. Passed building permit inspection.”

Amy W.

Kitchener, ON

BuilderResidentialDuplex Code Compliance

“Certified intumescent fire paint over spray foam. The application was clean with no overspray on steel beams or electrical runs. The crew was professional, polite, and fully WSIB insured.”

Brandon H.

London, ON

General ContractorCommercialDC315 Fire Coating

“Passed our building inspection with flying colors. The DC315 application met the 15-minute thermal barrier requirements under the Ontario building code. Highly professional service and documentation.”

Shirley A.

Oshawa, ON

General ContractorCommercialExposed Foam Fire Code

“Excellent duplex conversion project. They applied closed-cell spray foam and DC315 fire coating in the mechanical room. Outstanding coordination, clean work, and complete code compliance.”

Frank T.

East York, Toronto

BuilderResidentialDC315 Thermal Barrier

“Professional fire barrier application. They applied DC315 over exposed polyurethane spray foam. Certified thickness, verified WFT, and flawless documentation for our project engineers.”

Angela E.

Mississauga, ON

General ContractorCommercialDC315 Fire Coating

“Certified DC315 applicator. They sprayed our custom home crawl space foam and protected the space with ignition barrier coating. Neat, prompt, and completely compliant with local building codes.”

Gregory M.

Vaughan, ON

BuilderResidentialSpray Foam & Fire Paint

“They did a fantastic job with DC315 intumescent coating over foam in our commercial kitchen expansion. CCMC approved, passed municipal inspection first try. Professional and clean crews.”

Anna L.

Oakville, ON

General ContractorCommercialDC315 Thermal Barrier

“Hired them to apply cementitious fireproofing on the structural steel beams of a new commercial parking garage. Professional spray application of SFRM to code thickness. Passed third-party inspections first try with zero thickness issues.”

Fatima Z.

York, Toronto

General ContractorCommercialCementitious Fireproofing

“Excellent structural steel fireproofing service. They sprayed low-density cementitious material on the metal deck and columns. Crew worked safe at heights, fully WSIB compliant, and completed the job on schedule.”

Vikram M.

Mississauga, ON

BuilderCommercialCementitious Fireproofing

“We hire them for all our mid-rise commercial steel projects. Their crews apply cementitious fire resistive material (SFRM) to exact building code thickness. Prompt service, great prices, and fully insured.”

Rohan D.

Vaughan, ON

Project ManagerCommercialStructural Steel Fireproofing

“Passed our building inspection. They applied cementitious fire protection on steel columns in our new industrial building. Professional prep, excellent density control, and spotless cleanup. Great contractor.”

Tariq H.

Brampton, ON

BuilderCommercialCementitious Fireproofing

“Professional SFRM fireproofing contractor. They sprayed structural steel beams to meet 2-hour rating requirements. They provided complete technical documents and W/D ratio thickness charts for local inspectors.”

Yasmin R.

Markham, ON

General ContractorCommercialCommercial Fireproofing

“Sprayed cementitious fireproofing on steel deck and joists for our school project. Outstanding team, certified fireproofing crews, WSIB insured. They completed the work on schedule, passing inspection easily.”

Sanjay G.

Oakville, ON

BuilderCommercialStructural Steel Fireproofing

“Reliable commercial fireproofing contractor. Applied cementitious spray on structural steel beams in our new retail development. Excellent price, fast application, and zero scheduling delays.”

Anjali V.

Hamilton, ON

Project ManagerCommercialCementitious Fireproofing

“We needed medium-density cementitious fireproofing for a semi-exposed commercial parking deck. They applied the Monokote SFRM flawlessly. Passed thickness inspection first try. Outstanding crew.”

Chen W.

Barrie, ON

General ContractorCommercialParking Garage Fireproofing

“Great experience. They sprayed structural steel columns on our new commercial warehouse. The application thickness met all building code requirements. Highly professional, certified crews.”

Mei L.

Whitby, ON

BuilderCommercialCommercial Fireproofing

“Hired them to fireproof steel framing in a commercial office. They applied cementitious spray to exact specification and cleaned up every scrap of overspray. Passed inspections without issues.”

Wei Z.

Kitchener, ON

Project ManagerCommercialStructural Steel Fireproofing

“Highly professional SFRM application. They worked around our other trades to fireproof structural columns on schedule. Clean work, CCMC approved materials, WSIB insured. Will use again.”

Ying H.

London, ON

General ContractorCommercialCementitious Fireproofing

“We hired Sprayfoam Solutions to apply thin-film intumescent fire coating on architecturally exposed structural steel (AESS) beams in our new corporate headquarters lobby. The finish is incredibly smooth and looks like paint, yet provides a certified 2-hour fire rating. Passed third-party DFT testing first try.”

Jun Y.

Downtown Toronto, Toronto

General ContractorCommercialIntumescent Steel Fireproofing

“Outstanding thin-film intumescent application on exposed steel columns in a retail space. The architects wanted the steel visible, so cementitious was out. They did a marvelous job, primer and topcoat were perfectly applied.”

Linh N.

Mississauga, ON

BuilderCommercialIntumescent Fire Protection

“They applied intumescent coating on exposed timber beams in a heritage building restoration. Achieved code fire rating while preserving the historical wooden structure. Excellent workmanship, clean and professional.”

Jin S.

The Annex, Toronto

General ContractorCommercialAESS Fireproofing

“Excellent intumescent application for exposed structural steel in a commercial office. They verified dry film thickness (DFT) meticulously and provided complete documentation for the fire marshal. Passed inspection.”

Min-Ji K.

Vaughan, ON

Project ManagerCommercialIntumescent Steel Coating

“Hired them to apply intumescent fireproofing on steel structural columns in a new restaurant. Smooth finish, CAN/ULC-S101 compliant, and completed on schedule. Great contractor and pricing.”

Hao T.

Brampton, ON

BuilderCommercialThin-Film Intumescent

“Professional intumescent coating application on steel framing. Architects specified exposed steel look. This thin-film coating expanded perfectly in fire testing. Certified crews, WSIB insured, $5M liability.”

Raymond C.

Markham, ON

General ContractorCommercialAESS Fire Protection

“We needed a 1-hour fire rating on exposed structural steel columns. They applied thin-film water-based intumescent. Excellent smooth paint-like finish, on schedule, and zero issues with building code inspector.”

Kevin C.

Oakville, ON

Project ManagerCommercialIntumescent Fireproofing

“Great thin-film intumescent coating service. They worked weekends to prevent disrupting our ongoing commercial tenant operations. The finish looks spectacular and meets building code. Highly recommended.”

Raymond K.

Hamilton, ON

BuilderCommercialIntumescent Steel Coating

“They applied intumescent fire paint on exposed structural steel columns in a new school library. Smooth AESS finish, WSIB insured, same-week scheduling. Excellent coordination with our drywallers.”

Brenda C.

Barrie, ON

General ContractorCommercialIntumescent Fire Protection

“Professional thin-film intumescent application on exposed steel rafters. Excellent dry film thickness (DFT) reports provided. Passed building inspections first try. Best fireproofing contractor.”

Samuel G.

Pickering, ON

BuilderCommercialAESS Fireproofing

“They sprayed thin-film intumescent over steel framing in our commercial renovation. Cured quickly and was ready for topcoat in 24 hours. Certified crews, outstanding workmanship and pricing.”

Pamela R.

Kitchener, ON

General ContractorCommercialIntumescent Steel Coating

“Insulated and fireproofed historical timber beams in a heritage loft conversion. Thin-film intumescent kept the wood visible while meeting the 1-hour fire safety code. Outstanding workmanship.”

Benjamin B.

London, ON

BuilderCommercialHeritage Fire Protection

STRUCTURAL INTUMESCENT EXPERTS

Smooth AESS Category 1–4 Architectural Steel Finish
★★★★★5.0 Google Rating•55+ Verified Reviews•Serving Across Ontario
STEP 1: 60-SECOND PRICE CHECK
LOCK IN DIRECT CONTRACTOR PRICING

Fast Response & Quotes · No Commitment!

Tap to Select Your Project:
or call directly: 647-333-3626
VERIFIED, CERTIFIED & LISTED ON
Google5.0 ★ Verified
HomeStarsVerified Pro
Houzz ProListed Contractor
TrustedProsCanadian Directory
Caliber CertifiedCAN/ULC-S705.2
WSIB & CCMCOntario Cleared

Proudly Serving Toronto, GTA & All of Ontario

Direct contractor pricing · CAN/ULC-S101 & S124 Certified · $0 Travel Fee Across Ontario

Sprayfoam Solutions service coverage map across Toronto, GTA and Ontario
50+ Cities & Municipalities

With regional mobile crews stationed right near you, we charge $0 travel fees and stand as the best, most trusted contractor to serve your home or commercial building anywhere in Ontario.

WSIB Insured
6,500+ Projects Completed
Calculate Estimate →

Get Your Free Quote

Takes 10 seconds — we'll call you back.

Free Estimate No Obligation WSIB Cleared Licensed Caliber Certified
Call 647-333-3626 (7AM–9PM)
SERVING ALL ONTARIO:Ajax • Aurora • Barrie • Belleville • Bracebridge • Brampton • Brant • Brantford • Brock • Brockville • Burlington • Caledon • Cambridge • Chatham-Kent • Clarington • Collingwood • Cornwall • East Gwillimbury • Etobicoke • Fort Erie • Gravenhurst • Grimsby • Guelph • Halton Hills • Hamilton • Huntsville • Innisfil • Kawartha Lakes • King • Kingston • Kitchener • Lincoln • London • Markham • Milton • Mississauga • Muskoka • Newmarket • Niagara Falls • North York • Oakville • Orillia • Oshawa • Ottawa • Parry Sound • Pelham • Peterborough • Pickering • Port Colborne • Richmond Hill • Sarnia • Scarborough • Scugog • St. Catharines • St. Thomas • Stratford • Thorold • Toronto • Uxbridge • Vaughan • Wainfleet • Waterloo • Welland • West Lincoln • Whitby • Whitchurch-Stouffville • Windsor • Woodstock•Ajax • Aurora • Barrie • Belleville • Bracebridge • Brampton • Brant • Brantford • Brock • Brockville • Burlington • Caledon • Cambridge • Chatham-Kent • Clarington • Collingwood • Cornwall • East Gwillimbury • Etobicoke • Fort Erie • Gravenhurst • Grimsby • Guelph • Halton Hills • Hamilton • Huntsville • Innisfil • Kawartha Lakes • King • Kingston • Kitchener • Lincoln • London • Markham • Milton • Mississauga • Muskoka • Newmarket • Niagara Falls • North York • Oakville • Orillia • Oshawa • Ottawa • Parry Sound • Pelham • Peterborough • Pickering • Port Colborne • Richmond Hill • Sarnia • Scarborough • Scugog • St. Catharines • St. Thomas • Stratford • Thorold • Toronto • Uxbridge • Vaughan • Wainfleet • Waterloo • Welland • West Lincoln • Whitby • Whitchurch-Stouffville • Windsor • Woodstock

About Sprayfoam Solutions Toronto Inc

6,500+ projects completed since 2008. The Greater Toronto Area's trusted spray foam insulation & fireproofing contractor for commercial builders, general contractors, and homeowners.

647-333-3626Request a Quote
50 Howden Rd, Scarborough, ON M1R 3E4
100% Canadian Owned & OperatedLicensed • Up to $10M Insured • WSIB Clearance

Our Services

  • ›Spray Foam (Residential)
  • ›Spray Foam (Commercial)
  • ›Interior Sound Dampening
  • ›Fire Coating DC315
  • ›Cementitious Fireproofing
  • ›Intumescent Coating

Expert Guides

  • What is Spray Foam Insulation?
  • How Much Does Spray Foam Cost?
  • Our Chemicals & Technical Data
  • Customer Reviews (5.0 ★)
  • View Our Projects
  • Book Free On-Site Inspection

Areas We Serve

  • •Toronto & Central GTA
  • •Mississauga & Peel
  • •Oakville & Halton
  • •Vaughan & York Region
  • •Barrie & Simcoe County
  • •Muskoka & Cottage Country
  • •Waterloo & Tri-Cities
  • •Oshawa & Durham Region
  • + View All 50+ Cities
All project estimates, pricing illustrations, R-value metrics, and building code references on this website are for general informational purposes only and do not constitute a certified estimate or binding offer to contract. Formal written contracts provided by Sprayfoam Solutions Toronto Inc. following an on-site inspection strictly supersede all online representations. Subject to our Terms of Service and Privacy Policy.
AboutView Our WorkCustomer Reviews 5.0 ★CertificationsServicesAreas We ServeBlogContact UsTerms of ServicePrivacy Policy
© 2026 Spray Foam Solutions Toronto Inc. All Rights Reserved.