ADFI SprayFilm (A/D Firefilm® III) vs. Carboline Nullifire® vs. Sherwin-Williams Firetex®: 2026 Ontario Intumescent Steel Guide

ADFI SprayFilm (A/D Firefilm® III) vs. Carboline Nullifire® vs. Sherwin-Williams Firetex®: 2026 Ontario Overview & Code Essentials
When an architect, structural engineer, or general contractor specifies MasterFormat Section 07 81 23 (Intumescent Fireproofing) for exposed wide-flange W-columns, hollow structural steel (HSS) tubes, feature trusses, or load-bearing I-beams in Toronto, Mississauga, Brampton, Vaughan, Hamilton, or Ottawa, the project manual almost always names one of three dominant Canadian CAN/ULC-S101 product families: ADFI SprayFilm® WB3 / WB4 (formerly A/D Firefilm® III by Isolatek / Cafco), Carboline Nullifire® SC902 / SC801 / Thermo-Lag®, or Sherwin-Williams Firetex® FX5090 / FX6002. Choosing the wrong chemistry for your jobsite schedule—such as specifying a slow-drying multi-coat water-based acrylic on unconditioned winter steel when a single-coat fast-track hybrid like Nullifire SC902 is needed—can stall a commercial schedule by weeks under the Ontario Building Code.
At Sprayfoam Solutions Toronto Inc., we serve Ontario general contractors, steel fabricators, and property developers as a Single-Source Certified Spray Foam & Fire Coating Contractor operating Caliber Certified (CAN/ULC-S705.2 Licensed) Installers and specialized Division 07 intumescent fire coating and cementitious fireproofing crews. We also execute seamless envelope transitions into IFTI DC315 thermal barrier coating and turnkey spray foam + fire coating packages. Get a $250 Credit on Your Estimate — Check Your Price in 60 Seconds (/price-chat) • No Site Visit Required, or submit your structural steel schedule through our General Contractor & B2B Estimating Desk.
Compare our 3 commercial B2B pricing tiers for ADFI SprayFilm (A/D Firefilm III), Carboline Nullifire, and Sherwin-Williams Firetex across the GTA & Ontario:
- 45-Min to 2-Hr CAN/ULC-S101 Rating (ADFI SprayFilm, Nullifire or Firetex)
- Primer Verification + SSPC-PA 2 Elcometer DFT Log
- Includes $250 Estimate Credit
- 1-Hr to 2-Hr ULC Z600 / O900 / F900 Exposed Columns, Beams & Trusses
- Architectural Sanded Finish + Optional Polyurethane Topcoat
- Full GC Submittal Binder
- High-Build Plural/Airless Nullifire SC902 / Firetex FX6002 or Water-Based WB3/FX5090 + Turnkey SFRM / SPF / DC315 Envelope Tie-Ins
- Priority Tender Pricing
2026 Commercial Intumescent Brand Comparison Table (ADFI SprayFilm vs. Carboline Nullifire vs. Sherwin-Williams Firetex)
In 2026, installed intumescent structural steel coating costs in Ontario range from $5.50 to $12.50 per square foot depending on whether the architectural specification calls for an interior low-VOC water-based acrylic (ADFI SprayFilm WB3 / A/D Firefilm III, Firetex FX5090, Nullifire SC801) or a fast-track high-build hybrid/methacrylate system (Carboline Nullifire SC902, Firetex FX6002) that can be sprayed in a single high-build pass and exposed to early construction weather:
| Intumescent System & Manufacturer | Chemistry & Cure Mechanism | Typical Max Build Per Coat (WFT / DFT) | 2026 Installed Rate (/sq ft) | Best Ontario Project Application |
|---|---|---|---|---|
ADFI SprayFilm® WB3 / WB4(Isolatek / Cafco — Formerly A/D Firefilm® III) | Water-Based Acrylic(Low-VOC Interior Enclosed Spaces) | 40–50 Mils WFT ( 28–35 Mils DFT per pass • 12–24 hr recoat) | $5.50 – $8.90 / sq ft | Occupied Schools, Hospitals, Offices & Retail(Requires conditioned indoor air ≥10°C) |
Sherwin-Williams Firetex® FX5090 / FX5120(Water-Based Intumescent) | Water-Based Vinyl Acetate / Acrylic(Ultra-Smooth AESS Finish) | 45–60 Mils WFT ( 30–42 Mils DFT per pass • Smooth architectural profile) | $5.65 – $9.25 / sq ft | Interior AESS Columns, Lobbies, Atriums & Mezzanines(1-Hr to 2-Hr ULC Z600/O900) |
Carboline Nullifire® SC801 / Thermo-Lag® E100(Interior Water-Based / Epoxy) | Water-Based Acrylic (SC801) / 100% Solids Epoxy(E100) | 45–60 Mils WFT ( SC801) / Up to 250 Mils (E100 High-Impact) | $5.75 – $11.50 / sq ft | Commercial Interiors ( SC801) or High-Abuse Industrial / Transit Zones(E100) |
Carboline Nullifire® SC902(Fast-Track Hybrid Polyurethane/Urea) | 2-Component Fast-Track Hybrid(1-Hour Rain & Weather Resistant) | Up to 200+ Mils DFT in 1 Coat!(Cures down to -5°C • Touch dry in 1 hr) | $7.50 – $12.50 / sq ft | Fast-Track Unenclosed Steel, Winter Schedules, Canopies & Multi-Coat Time Savings |
Sherwin-Williams Firetex® FX6002(Ultra-Fast-Track Methacrylate) | Reactive Methacrylate Hybrid(Rapid Cure & Exterior Durability) | Up to 160+ Mils DFT per Coat(Hard, impact-resistant film within hours) | $7.25 – $12.25 / sq ft | Accelerated GC Schedules, Exposed Feature Steel & High-Traffic Columns |
Interior Controlled-Environment Water-Based Coatings (A/D Firefilm III / FX5090 / SC801) vs. Fast-Track Hybrid Steel Systems (Nullifire SC902 / FX6002)
As explained in our ULC Fire-Rated Design Numbers Guide (F906, D902, Z600), a 1-hour or 2-hour CAN/ULC-S101 fire rating on a slender steel section (low W/D ratio) frequently requires 65 to 145 mils Dry Film Thickness (DFT). How you build those 100+ mils determines how many days our scissor lifts occupy your floor plate:
| Scheduling & Engineering Factor | Water-Based Intumescent (SprayFilm WB3 / FX5090 / SC801) | Fast-Track Hybrid Intumescent (Nullifire SC902 / Firetex FX6002) |
|---|---|---|
Number of Spray Coats for 100–130 Mils DFT | 3 to 4 Separate Spray Passes(30–40 mils DFT per pass to prevent sagging) | 1 to 2 High-Build Spray Passes(Up to 160–200 mils DFT in a single build) |
Inter-Coat Cure Time on Site | 12 to 24 Hours Between Coats(Slows down above 65% relative humidity) | 1 to 4 Hours to Touch-Dry(Can be topcoated the same or very next shift) |
Building Enclosure & Weather Requirement | Building MUST Be Dried-In & Heated ( ≥10°C / 50°F, <75% RH, zero rain/condensation) | Can Be Sprayed on Unenclosed Steel(Weather-resistant in 60 mins; cures down to -5°C) |
VOC & Occupied-Building Odour Profile | Ultra-Low VOC Water-Based(Ideal for occupied retrofits, schools & hospitals) | Moderate Solvent Odor During Spray(Requires active ventilation; cures odourless) |
Film Hardness & Damage Resistance | Requires Urethane Topcoat ( ADFI Topseal) in High-Traffic / Humid Zones | Cures to a Rock-Hard, Gouge-Resistant Elastomeric/Methacrylate Shell |
![Clear Sansin Firestop 99 intumescent fire coating applied to high-quality pressurized mass timber stairwell walls and ceilings in Newmarket & Aurora [JOB-2026-07-24-01]](/images/jobs/intumescent-fire-coating/intumescent-fire-coating-toronto-job-2026-07-24-01-17.webp)
Understanding CAN/ULC-S101 Listings, W/D Ratios & Dry Film Thickness (DFT) Mils on W-Shapes vs. HSS Hollow Columns
In the UL Product iQ / ULC Online Directories, intumescent coatings are tested under CAN/ULC-S101 across specific design numbers (ULC Z608, Z619, Z629, O905, F914). Because hollow structural steel (HSS square, rectangular, and round columns) heats up on all four outer surfaces with an empty air core inside, HSS tubes have a lower thermal mass (A/P or C/D ratio) than heavy wide-flange W-shapes—typically requiring 20% to 40% higher Dry Film Thickness (DFT) to keep the steel below its 538°C critical buckling temperature.
Primer Compatibility Matrices, Topcoat Systems & Mandatory Brand Umbrellas (OBC Part 3 Compliance)
Under 2026 Ontario Building Code Division B Section 3.1.7, an intumescent coating is a 3-part engineered assembly: (1) Approved Anti-Corrosive Steel Primer, (2) Tested Intumescent Basecoat, and (3) Compatible Architectural Topcoat. As a certified Division 07 contractor, Sprayfoam Solutions Toronto Inc. installs and certifies Isolatek Cafco® 300, GCP Monokote® MK-6® / Z-106, Carboline Pyrocrete® / Nullifire® SC902, Sherwin-Williams Firetex® & other ULC-listed structural fireproofing systems:
![Caliber Certified installer in white protective coveralls spraying 3.5" (R22) of 2lb closed-cell spray foam across exterior 2x6 wood stud cavities in King City & Caledon [JOB-2024-07-25-01]](/images/jobs/closed-cell-spray-foam/closed-cell-spray-foam-toronto-job-2024-07-25-01-5.webp)
Low-VOC, smooth architectural finish for conditioned interiors.
Applied in 30–40 mil DFT passes; lightly sanded before topcoat.
Looks like smooth architectural paint on exposed steel.
When structural steel columns, beams, or feature stairs are located inside dried-in, climate-controlled offices, schools, retail stores, or custom homes, water-based intumescent coatings deliver a smooth, low-odour architectural finish.
6 Critical Applicator & Steel Fabricator Rules for Intumescent Fire Coatings in Ontario
Unlike rough cementitious plaster, thin-film intumescent coatings require precision industrial coatings discipline (see our Turnkey Warehouse SPF + DC315 Guide and Commercial Building Envelope Guide). Here are the 6 critical field rules our certified applicators enforce on every Ontario project:
- 1. Never Let the Steel Fabricator Apply an Unapproved Alkyd Shop Primer Without Checking the ULC Primer Table: During a fire (
>200°C), an intumescent coating swells20x to 50xits dry thickness, exerting intense pull stress on the underlying primer. If the steel fabricator sprayed a cheap, non-tested shop alkyd or left heavy mill scale on the steel, the expanding char will delaminate. We verify primer thickness (2.0–4.0 mils DFT), run cross-hatch adhesion tests (ASTM D3359), and apply a certified epoxy tie-coat (Carboguard 890/Macropoxy 646) whenever required. - 2. Maintain ≥3°C (5°F) Spread Above the Steel Dew Point During Application: Cold structural steel in an Ontario spring, fall, or winter building attracts invisible surface condensation. Our lead technician logs ambient temperature, relative humidity, and infrared steel surface temperature before every shift to verify the steel is at least
3°C (5°F)above the dew point. - 3. Use 3,000+ PSI Heavy-Duty Airless Pumps With Removed Filters & 0.019"–0.025" Tips: Intumescent mastics (
ADFI SprayFilm,Nullifire SC902,Firetex) are high-solids, shear-sensitive coatings that cannot be thinned aggressively or sprayed through small residential paint sprayers. We deploy high-output hydraulic and electric airless rigs (Graco Mark V / Mark X / King) to lay down a glass-smooth architectural film. - 4. Never Confuse CAN/ULC-S124 (IFTI DC315 Foam Barrier) With CAN/ULC-S101 Steel Intumescent: As detailed in our DC315 Fire Coating Guide and DC315 Cost Guide, IFTI DC315® evaluated by CCMC #14036-R is a 15-minute thermal barrier over spray polyurethane foam (
BASF Walltite® Eco v.3, Huntsman Building Solutions (Icynene/Demilec), Johns Manville & other approved CCMC spray foam chemicals), whereas structural steel columns and beams require CAN/ULC-S101 intumescent systems (Nullifire,Firetex,SprayFilm). - 5. Enforce Canadian CCOHS & Ontario OHSA Ventilation & Overspray Masking: We bag all glazing, curtain-wall mullions, wood millwork, and sprinkler heads, and maintain active ventilation per CCOHS and Ontario Ministry of Labour (
OHSA) protocols. Once cured, the finished intumescent and polyurethane topcoat assembly is chemically stable, fully cured, and odourless. - 6. Deliver SSPC-PA 2 Calibrated Elcometer Magnetic DFT Logs per Steel Member: Before and after topcoating, we record digital magnetic Dry Film Thickness (
DFT) spot and area measurements across every column web, flange face, and beam soffit in accordance with SSPC-PA 2—subtracting the verified primer thickness so the building inspector and engineer of record receive an ironclad compliance binder.
![5" (R31) of 2lb closed-cell spray foam on a sloped cathedral ceiling roof deck and 3.5" (R22) on exterior walls in York, Toronto (Baby Point & High Park) [JOB-2025-10-01-01]](/images/jobs/cathedral-ceiling-spray-foam/cathedral-ceiling-spray-foam-toronto-job-2025-10-01-01-5.webp)
Intumescent Steel Coating vs. Cementitious SFRM vs. Type X Drywall Column Boxing (2026 Comparison)
When architects and general contractors compare intumescent fire coating against cementitious SFRM or framed drywall column enclosures (see our DC315 vs. Drywall Comparison), here is how the three structural steel fireproofing methods stack up in 2026:
| Structural Steel Metric | Thin-Film Intumescent (SprayFilm / Nullifire / Firetex) | Cementitious SFRM (Monokote MK-6 / Z-106 / Cafco) | Multi-Layer 5/8" Type X Drywall Boxing |
|---|---|---|---|
2026 Installed Cost(/sq ft) | $5.50 – $12.50 / sq ft(Architectural Exposed) | $2.25 – $5.85 / sq ft(Concealed / Industrial) | $9.50 – $16.50+ / sq ft(Framing + Board + Tape) |
Visual Finish(AESS Rating) | Sleek Paint Finish(Matches any RAL/BM colour) | Rough, nodular fibrous plaster texture | Bulky square box; hides architectural steel |
Total Thickness Added(1–2 Hr) | 0.03" to 0.14"( 30–145 Mils DFT) | 0.38" to 1.75"( 10 mm to 44 mm) | 3.5" to 6.0"+ Lost Per Side(Shrinks floor area) |
Impact & Abrasion Resistance | Extremely High(Hard acrylic/hybrid/epoxy shell) | Moderate ( 15 lb) to High(22–40 lb Portland) | Easily dented by carts, forklifts & foot traffic |
Complex Truss & Connection Fit | Wraps bolted gussets, rods & HSS seamlessly | Sprays over connections with thick contour buildup | Nearly impossible to frame around diagonal trusses |
CAN/ULC-S101 Rating Range | 45-Min, 1-Hr, 1.5-Hr, 2-Hr & 3-Hr Listed | 45-Min to 4-Hr Listed ( F900, D900, Z600) | 45-Min to 2-Hr( ULC Z500 gypsum membrane) |
Same-Week Commercial Airless Fleet Dispatch Across Toronto, the GTA & Ontario
Every commercial structural steel intumescent, cementitious SFRM, and turnkey spray foam project is delivered by Sprayfoam Solutions Toronto Inc. as your Single-Source Certified Spray Foam & Fire Coating Contractor with Caliber Certified (CAN/ULC-S705.2 Licensed) Installers and $0 surrounding GTA travel fee across Toronto, Mississauga, Brampton, Vaughan, Markham, Oakville, Burlington, Hamilton, Pickering, Ajax, Whitby, Oshawa, Milton, and Barrie:

Get an instant ballpark at /price-chat or send your steel schedule for an exact W/D ratio and DFT mil takeoff per ULC Design Number.

We log base-primer DFT, test cross-hatch adhesion, apply tie-coats if needed, verify steel dew-point spread (≥3°C), and mask surrounding finishes.

Precision airless application of ADFI SprayFilm, Nullifire SC902/SC801, or Firetex to the exact required wet and dry mil thickness.

Optional urethane colour topcoat, SSPC-PA 2 digital Elcometer DFT logs per member, site cleanup, and ULC compliance binder handover.
Frequently Asked Questions
ADFI SprayFilm® WB3 / WB4 (formerly A/D Firefilm® III) and Sherwin-Williams Firetex® FX5090 are low-VOC, water-based interior intumescent coatings ideal for conditioned, enclosed buildings (≥10°C, <75% RH), applied in 30–42 mil DFT coats to achieve a smooth AESS architectural finish. Carboline Nullifire® SC902 and Sherwin-Williams Firetex® FX6002 are fast-track hybrid/methacrylate intumescent systems that build up to 160–200+ mils DFT in a single coat, cure down to -5°C, and resist rain within 60 minutes—making them ideal for unenclosed structural steel and accelerated construction schedules. Contact Sprayfoam Solutions Toronto Inc. at (647) 333-3626 or check your price at spfsolutions.ca/price-chat.
In 2026, CAN/ULC-S101 thin-film intumescent structural steel fire coating installed by Sprayfoam Solutions Toronto Inc. costs $5.50 to $9.50 per square foot for water-based interior systems (ADFI SprayFilm WB3, Firetex FX5090, Nullifire SC801) and $7.25 to $12.50 per square foot for fast-track hybrid systems (Nullifire SC902, Firetex FX6002) across 45-minute, 1-hour, and 2-hour ratings. Call (647) 333-3626 or claim a $250 Estimate Credit in 60 seconds at spfsolutions.ca/price-chat.
As a Single-Source Certified Spray Foam & Fire Coating Contractor operating Caliber Certified (CAN/ULC-S705.2 Licensed) Installers and certified Division 07 fireproofing crews, Sprayfoam Solutions Toronto Inc. installs Isolatek Cafco® 300, GCP Monokote® MK-6® / Z-106, Carboline Pyrocrete® / Nullifire® SC902, Sherwin-Williams Firetex® & other ULC-listed structural fireproofing systems (BM-44C), alongside IFTI DC315® (CCMC #14036-R), No-Burn® Plus ThB, Flame Control No. 60-60A & other approved CAN/ULC-S124 thermal barrier coatings (BM-44B).
Yes. Because ADFI SprayFilm (A/D Firefilm III), Carboline Nullifire, and Sherwin-Williams Firetex are all tested to the exact same CAN/ULC-S101 fire-endurance standard and hold equivalent ULC Z600, O900, and F900 series design listings, our engineering team regularly prepares side-by-side ULC Design Equivalency & W/D Submittal Packages when a project requires switching from a water-based spec to a fast-track hybrid (or vice versa) to meet site temperature or schedule constraints.
Steel intended for intumescent fireproofing should be abrasive blast-cleaned to SSPC-SP6 / NACE No. 3 and primed at 2.0 to 4.0 mils DFT with a manufacturer-approved two-component polyamide epoxy or phenolic/modified alkyd primer (such as Carboline Carboguard 890, Sherwin-Williams Macropoxy 646, or Kem Bond HS). Unapproved shop primers or over-thick primer films (>5.0 mils DFT) require a barrier tie-coat prior to intumescent application.
Yes. While most intumescent basecoats (ADFI SprayFilm, Nullifire, Firetex) spray on as a flat matte white or off-white film, our crew can sand the cured basecoat smooth (AESS 2 to AESS 4 finish) and spray a ULC-tested polyurethane or acrylic topcoat (ADFI Topseal, Carbothane 133, Acrolon 218 HS) tinted to any RAL, Pantone, Benjamin Moore, or Sherwin-Williams colour in matte, satin, or semi-gloss sheen.
Yes. When a custom home, loft renovation, or open-concept basement in Toronto or the GTA features an exposed load-bearing steel W-beam (I-beam) or HSS telepost column that requires a 45-minute or 1-hour Ontario Building Code fire-resistance rating without ugly drywall boxing, our mobile crew applies architectural intumescent coating and issues the signed CAN/ULC-S101 / Elcometer DFT certificate for your municipal building inspector.
General contractors, structural steel fabricators, and architects can check ballpark square-foot pricing and claim a $250 Estimate Credit in 60 seconds at spfsolutions.ca/price-chat (No Site Visit Required), upload structural framing drawings through our General Contractor Bid Desk, or call Sprayfoam Solutions Toronto Inc. directly at (647) 333-3626 for same-week dispatch across Toronto, the GTA, and Ontario.
Select your structural fire protection scope or local GTA municipality below for 2026 unit pricing and same-week dispatch:






