Medium & High-Density Cementitious Fireproofing in Ontario (2026): Monokote® Z-106, Z-146 & Cafco® 400 Parkade & Industrial Guide

Medium & High-Density Cementitious Fireproofing in Ontario (2026): 2026 Ontario Overview & Code Essentials
Specifying or bidding medium-density and high-density cementitious fireproofing in Toronto, the GTA, Hamilton, and across Ontario requires strict adherence to MasterFormat Division 07 81 16 and CAN/ULC-S101 structural fire-resistance listings. While standard 15 lb/ft³ low-density gypsum fireproofing (Monokote® MK-6, Cafco® 300) is the economical workhorse for concealed steel beams above dry office drop-ceilings, gypsum-based SFRM absorbs moisture, softens under freeze-thaw cycling, and spalls off when exposed to vehicle exhaust turbulence, forklift bumps, or high-velocity HVAC plenum air.
Whenever structural steel wide-flange beams, fluted Q-decks, or concrete soffits sit inside unheated underground condo and retail parkades, semi-exposed truck loading docks, high-velocity mechanical fan rooms, elevator hoistways, water treatment plants, or heavy industrial facilities, Ontario engineers mandate 22 lb/ft³ medium-density (GCP Monokote® Z-106, Isolatek® Cafco® 400) or 40 lb/ft³ high-density (Monokote® Z-146, Cafco® Fendolite® MII & other ULC-listed structural fireproofing systems) hydraulic Portland-cement fireproofing. Installed by Sprayfoam Solutions Toronto Inc. ((647) 333-3626), our high-output continuous mixer-pump crews and Caliber Certified (CAN/ULC-S705.2 Licensed) thermal insulation teams deliver single-source Division 07 fireproofing and turnkey spray foam + fire coating packages. Check your commercial unit rates in 60 seconds at spfsolutions.ca/price-chat and claim a $250 Credit on Your Estimate with No Site Visit Required.
Compare our 3 commercial and industrial Portland-cement SFRM specification tiers before running your 60-second square-foot takeoff:
- ≥22 lb/ft³ Portland-Cement SFRM
- ≥430 psf Bond Strength (ASTM E736)
- High-Humidity & Freeze-Thaw Resistant
- Includes $250 Estimate Credit
- CAN/ULC-S101 D900/F900/Z600 Series
- Abrasion & Air-Erosion Resistant
- Full ASTM E605/E736 Field QA Binder
- Multi-Pump Dispatch
- ≥40 lb/ft³ Hard-Coat Portland Cement
- ≥1,000–2,000 psf Bond Strength
- Weather-Exposed & Hydrocarbon Fire Rated
- Includes $250 Credit
2026 22 lb & 40 lb Portland-Cement SFRM Cost Per Square Foot Table (Ontario Commercial & Industrial)
Unlike thin-film intumescent fire coating for exposed architectural steel, cementitious fireproofing is priced by density class (15 lb, 22 lb, or 40 lb/ft³), ULC design thickness (0.50" to 2.25"+ depending on steel W/D ratio and hourly rating), and surface preparation requirements (such as galvanized deck primers or mechanical rib lath). Here is our transparent 2026 Ontario unit-price matrix across project volumes from 2,500 sq ft to 100,000+ sq ft:
| SFRM Material Class & Brand Spec | Target Density & Bond (ASTM E605 / E736) | Typical ULC Hourly Rating & Thickness | 2026 Installed Rate (/sq ft) | Typical Commercial / Industrial Application |
|---|---|---|---|---|
15 lb Standard Gypsum SFRM(Monokote MK-6 / Cafco 300 Baseline) | ≥15 lb/ft³ • ≥200 psf bond | 1-Hr to 2-Hr(0.50" – 1.25") | $2.65 – $4.75 / sq ft | Dry conditioned interior steel above drop ceilings |
22 lb Medium-Density Portland SFRM(Monokote Z-106 / Cafco 400 — 1-Hr) | ≥22 lb/ft³ • ≥430 psf bond | 1-Hr CAN/ULC-S101(0.50" – 0.85") | $4.50 – $6.40 / sq ft | Underground parkade beams, ramps & unheated soffits |
22 lb Medium-Density Portland SFRM(Monokote Z-106 / Cafco 400 — 2-Hr) | ≥22 lb/ft³ • ≥430 psf bond | 2-Hr CAN/ULC-S101(0.95" – 1.65") | $6.10 – $8.90 / sq ft | Condo parkade transfer slabs, mechanical rooms & elevator shafts |
22 lb Medium-Density + 3-Hr Assembly(Structural Columns & Primary Girders) | ≥22 lb/ft³ • ≥430 psf bond | 3-Hr CAN/ULC-S101(1.50" – 2.25") | $7.80 – $10.50 / sq ft | High-rise podium steel, hospital & institutional cores |
40 lb High-Density Portland SFRM(Monokote Z-146 / Cafco Fendolite MII) | ≥40 lb/ft³ • ≥1,000+ psf bond | 1-Hr to 4-Hr(0.65" – 2.00") | $8.80 – $14.80+ / sq ft | Loading bays, transit tunnels, manufacturing & UL 1709 plants |
Turnkey Parkade Soffit Package(2 lb Closed-Cell SPF + 18-Mil DC315) | CAN/ULC-S705.1 + S124 | R-21 to R-31 + 15-Min Thermal Barrier | $5.10 – $7.60 / sq ft | Heated condo/retail floors above unheated underground parking |
Underground Parkades, Mechanical Rooms & Loading Docks (Why 22 lb Monokote Z-106 & Cafco 400 Are Mandatory)
In Toronto and GTA mid-rise and high-rise construction, the structural transfer beams, steel columns, and metal composite decks inside underground parking garages (P1 to P5 levels) and open-bay shipping/receiving docks experience 85%+ relative humidity in summer and sub-zero road-salt mist in winter. Standard 15 lb gypsum SFRM is water-soluble and rapidly delaminates in these zones. Specifying 22 lb medium-density Portland-cement SFRM (GCP Monokote® Z-106 / Z-106 HY, Isolatek® Cafco® 400 & other ULC-listed structural fireproofing systems) solves four critical building-envelope challenges:
- 1. Hydraulic Portland-Cement Binder Resists Humidity & Condensation: Because
Monokote® Z-106andCafco® 400cure via hydraulic Portland-cement hydration rather than soft gypsum crystallization, they withstand persistent dampness, wash-down splash, and seasonal freeze-thaw cycles inside unconditioned parkades and open parking structures. - 2. More Than Double the Cohesive & Adhesive Bond Strength (
≥430 psfper ASTM E736): At 430+ lbs per square foot bond strength, 22 lb medium-density SFRM resists structural vibration from overhead truck loading docks, subway proximity, and heavy air-handling units without flaking. - 3. High-Velocity HVAC Plenum & Elevator Shaft Air-Erosion Resistance (
ASTM E859): Mechanical penthouses, return-air plenums, and high-speed elevator hoistways generate intense air pressure differentials. Medium-density 22 lb cementitious fireproofing passes ASTM E859 air-erosion testing at 0.00 g/ft² without shedding dust into hospital or commercial HVAC ductwork. - 4. Seamless Coordination With Turnkey Parkade Thermal Insulation (
2 lb SPF + DC315): Where an unheated P1 underground parkade ceiling sits directly beneath ground-floor retail units or residential condo suites, structural steel requires CAN/ULC-S101 cementitious fireproofing while the concrete soffit requires OBC SB-10 thermal insulation (R-24 to R-31). As a single-source Division 07 contractor, Sprayfoam Solutions Toronto Inc. installs both your 22 lb cementitious steel fireproofing AND your turnkey 2 lb closed-cell spray foam + 18-mil DC315 thermal barrier (IFTI DC315, No-Burn Plus ThB, Flame Control 60-60A & other approved CAN/ULC-S124 / CCMC intumescent thermal barrier coatings) under one contract.
![5" (R31) of 2lb closed-cell spray foam on flat ceiling joists in Toronto (Forest Hill & Rosedale) [JOB-2021-10-08-01]](/images/jobs/closed-cell-spray-foam/closed-cell-spray-foam-toronto-job-2021-10-08-01-2.webp)
High-Impact Industrial, Infrastructure & Petrochemical Zones (40 lb Monokote Z-146 & Cafco Fendolite MII)
When structural steel is located in high-abuse industrial bays, forklift traffic corridors (<10 ft above finished floor), wastewater treatment plants, transit tunnels, power generation stations, or petrochemical/refinery units, architects step up to 40 lb to 50 lb/ft³ high-density Portland-cement SFRM (GCP Monokote® Z-146 / Z-156, Isolatek® Cafco® Fendolite® MII & other ULC-listed structural fireproofing systems). Delivering ≥1,000 to 2,000+ psf bond strength (ASTM E736) and >500 psi compressive strength (ASTM E761), 40 lb high-density fireproofing forms a rock-hard concrete-like protective jacket rated for both CAN/ULC-S101 cellulosic fires and UL 1709 rapid-rise hydrocarbon pool fires (2,000°F in 5 minutes).
ASTM E605 Density, ASTM E736 Bond (>430–1,000 psf) & CAN/ULC-S101 Compliance Standards
Under the 2026 Ontario Building Code Division B Part 3 (Section 3.1.7 & SB-2) and National Research Council Canada / ULC Standards, every medium- and high-density cementitious fireproofing installation in Ontario must be applied in strict accordance with its tested ULC Design Number (D900, F900, Z600, O900, or U900 series) and verified by independent third-party field testing (see our Commercial Fireproofing Requirements in Toronto Guide).
![3.5" (R22) of 2lb closed-cell spray foam around poly-masked window framing in Mississauga (Lorne Park & Port Credit) [JOB-2023-07-22-01]](/images/jobs/closed-cell-spray-foam/closed-cell-spray-foam-toronto-job-2023-07-22-01-41.webp)
Moisture, abrasion & freeze-thaw resistant Portland cement.
Applied directly to structural beams, columns & fluted decks.
Ideal for parkades, mechanical rooms & elevator shafts.
Whenever structural steel is located in unheated underground parking garages, mechanical fan rooms, elevator shafts, or covered loading docks, 22 lb/ft³ medium-density Portland-cement SFRM (Monokote Z-106 or Cafco 400) prevents moisture softening and delivers ≥430 psf bond strength—passing third-party ASTM E605 and E736 testing on the first inspection.
6 Critical On-Site Trade Rules for Medium & High-Density Cementitious Fireproofing in Ontario
Because 22 lb and 40 lb Portland-cement fireproofing slurries pump at higher pressures and cure into dense hydraulic matrices, general contractors and site superintendents must coordinate six technical field rules before our pump trucks mobilize:
- 1. Verify Shop-Primer Compatibility & Galvanized Deck Bonding (
Spatterkote®/Bond-Seal): Bare structural steel must be free of mill scale, cutting oil, and loose rust. Where structural steel has been shop-primed with alkyd or epoxy primer—or where spraying onto slick galvanized composite floor decking—ULC listings frequently require a manufacturer-approved bonding adhesive (GCP Spatterkote® SK-3orIsolatek® Type EBS) so the heavy 22 lb/40 lb wet slurry achieves full≥430–1,000 psfadhesion. - 2. Install Mechanical Metal Lath on Deep-Web Girders & High-Density Exterior Steel When Required by ULC Design: Under specific CAN/ULC-S101 designs (especially
40 lb Monokote® Z-146on large structural shapes or unrestrained beams subject to vibration), galvanized expanded metal lath or2"×2"wire mesh must be mechanically fastened to the steel flanges prior to spraying. - 3. Complete Overhead Mechanical Hangers, Sprinkler Mains & Conduit Drops BEFORE Spraying: Once 22 lb or 40 lb Portland-cement fireproofing cures, it is rock-hard. All concrete drop-in anchors, trapeze hangers, sprinkler branch clamps, and steel Partition top-track clips must be installed before we spray so sub-trades do not chisel off cured fireproofing and trigger a municipal Fire Marshal deficiency hold.
- 4. Maintain Minimum
+4.4°C (40°F)Substrate & Ambient Temperature During 24-Hour Hydraulic Cure: Even though curedMonokote® Z-106andCafco® 400are 100% freeze-thaw durable for the life of the building, fresh wet Portland-cement slurry cannot freeze in the hose or on cold winter steel during application and the first 24 hours of hydration. In winter parkade builds, temporary hoarding and indirect heaters keep steel above+4.4°C. - 5. Schedule Independent Third-Party
ASTM E605(Density) &ASTM E736(Cohesion/Adhesion) Field Testing Early: Ontario municipal building officials and project engineers require third-party testing agencies (such as Pinchin,WSP, Englobe, or EXP) to measure wet/dry pin thickness (ASTM E605) and pull-test bond caps (ASTM E736). Our lead applicator logs wet-depth pin checks every 100 sq ft during application so third-party lab inspectors sign off with zero rework. - 6. Never Apply Cementitious SFRM Directly Over Flexible Spray Foam Without Approved Transition Details: Rigid hydraulic cementitious fireproofing and flexible polyurethane spray foam have different thermal expansion coefficients. Where your project includes both structural steel fireproofing and commercial spray foam insulation, we fireproof the structural steel first with
Monokote Z-106 / Cafco 400and protect the adjacent spray foam with certified 18-mil IFTI DC315 thermal barrier coating (CAN/ULC-S124/CCMC #14036-R).
![5" (R31) of 2lb closed-cell spray foam on a sloped cathedral ceiling roof deck and 3.5" (R22) on exterior walls in Brampton (Castlemore & Credit Valley) [JOB-2025-07-17-01]](/images/jobs/cathedral-ceiling-spray-foam/cathedral-ceiling-spray-foam-toronto-job-2025-07-17-01-1.webp)
15 lb Standard SFRM vs. 22 lb Medium-Density vs. 40 lb High-Density vs. Intumescent Paint (2026 Comparison)
General contractors and estimators comparing specifications in our Cementitious vs. Intumescent Fireproofing Guide and Ontario Fireproofing Cost Per Sq Ft Guide can use this side-by-side matrix to select the exact code-approved system:
| Technical & Cost Metric | 15 lb Standard SFRM (Monokote MK-6 / Cafco 300) | 22 lb Medium-Density SFRM (Monokote Z-106 / Cafco 400) | 40 lb High-Density SFRM (Monokote Z-146 / Fendolite) | Thin-Film Intumescent Coating (AESS Exposed Steel) |
|---|---|---|---|---|
Primary Binder Chemistry | Gypsum / Vermiculite | 100% Hydraulic Portland Cement | High-Strength Portland Cement | Acrylic / Epoxy Intumescent Char |
Dry Density( ASTM E605) | ≥15 lb/ft³(240 kg/m³) | ≥22 lb/ft³(352 kg/m³) | ≥40 lb/ft³(640 kg/m³) | Thin Film(18 to 140 mils DFT) |
Bond Strength( ASTM E736) | ≥200 psf | ≥430 psf(>2× stronger) | ≥1,000 – 2,000 psf(>5× stronger) | Chemical Cross-Linked Bond |
Humidity & Freeze-Thaw | Dry Concealed Interior Only | Yes — Parkades, Docks & Shafts | Yes — Exterior & Heavy Industrial | Interior & Conditioned AESS |
Surface Finish Appearance | Textured Acoustical Stipple | Hard Textured Cementitious | Dense Troweled or Spray Cement | Smooth Architectural Paint Finish |
2026 Installed Cost(/sq ft) | $2.65 – $4.75 / sq ft | $4.50 – $9.20 / sq ft | $8.80 – $14.80+ / sq ft | $6.50 – $15.50+ / sq ft |
Rapid Division 07 Commercial Mobilization Across Toronto, the GTA & Ontario ($0 GTA Travel Fee)
Whether you need a 50,000+ sq ft underground condo parkade sprayed with Monokote® Z-106 or an urgent tenant improvement fireproofing patch and respray to clear a municipal occupancy hold, Sprayfoam Solutions Toronto Inc. dispatches self-contained mixer-pump rigs across Toronto, Mississauga, Brampton, Vaughan, Markham, Oakville, Burlington, Hamilton, Oshawa, Barrie, Kitchener-Waterloo, and London with $0 Travel Fee across the GTA.

We verify structural steel W/D ratios against CAN/ULC-S101 design numbers and submit product data for architect sign-off.

We mask all mechanical equipment, conduits, and glazing, verify primer compatibility, and apply Spatterkote bonding agent where required.

High-output pumping of Monokote Z-106, Z-146, or Cafco 400 to exact ULC wet-film pin depths across decks, girders, and columns.

We log wet-depth pin gauges, coordinate with third-party testing engineers for density/bond cores, and leave the floor broom-clean.
Frequently Asked Questions: Medium & High-Density Cementitious Fireproofing in Ontario
In 2026, 22 lb medium-density Portland-cement SFRM (Monokote® Z-106, Cafco® 400) installed by Sprayfoam Solutions Toronto Inc. costs $4.50 to $6.40 per sq ft for a 1-hour CAN/ULC-S101 rating and $6.10 to $9.20 per sq ft for a 2-hour rating in underground parkades, loading docks, and mechanical rooms. Heavy 40 lb high-density SFRM (Monokote® Z-146, Fendolite® MII) costs $8.80 to $14.80+ per sq ft depending on hourly thickness and metal lath requirements. Get your instant ballpark quote at spfsolutions.ca/price-chat or call (647) 333-3626 to lock in a $250 Estimate Credit.
Standard 15 lb/ft³ SFRM (Monokote® MK-6, Cafco® 300) uses a calcined gypsum binder designed strictly for dry, conditioned interior plenums. In unconditioned underground parkades, open loading bays, and damp mechanical shafts, high humidity, road-salt mist, and winter freeze-thaw cycles dissolve gypsum crystals and cause delamination. 22 lb medium-density (Monokote® Z-106, Cafco® 400) uses a hydraulic Portland-cement binder with ≥430 psf bond strength (ASTM E736) that permanently resists moisture and freeze-thaw cycling.
GCP Monokote® Z-106 (and Z-106/HY) is a 22 lb/ft³ medium-density Portland-cement fireproofing (≥430 psf bond strength) specified for high-humidity interior and semi-exposed commercial zones such as underground parking garages, elevator shafts, and mechanical rooms. Monokote® Z-146 is a 40 lb/ft³ high-density Portland-cement fireproofing (≥1,000 psf bond strength) engineered for severe mechanical abrasion zones, weather-exposed exterior steel, industrial processing plants, and UL 1709 hydrocarbon fire exposures.
Both Isolatek® Cafco® 400 and GCP Monokote® Z-106 (along with other ULC-listed structural fireproofing systems) are 22 lb/ft³ medium-density hydraulic Portland-cement SFRMs tested to CAN/ULC-S101, ASTM E605, and ASTM E736 (≥430 psf bond). When a project specification lists one brand as the basis of design under MasterFormat 07 81 16, our engineering desk submits the matching ULC Design Number (D900, F900, or Z600 series) and W/D thickness calculation to the project architect for formal equivalency approval.
Under the Ontario Building Code, independent testing agencies inspect cementitious fireproofing against two primary standards: ASTM E605 (measuring thickness with a calibrated needle gauge across a grid of bays and weighing core samples to verify ≥22 lb/ft³ or ≥40 lb/ft³ dry density) and ASTM E736 (gluing a metal cap to the cured SFRM with polyurethane foam and pulling it with a calibrated spring scale to verify ≥430 psf or ≥1,000 psf cohesive/adhesive bond).
Yes. Sprayfoam Solutions Toronto Inc. ((647) 333-3626 • spfsolutions.ca/price-chat) is a single-source Division 07 contractor. On underground parkades beneath heated retail or residential floors, our Caliber Certified (CAN/ULC-S705.2 Licensed) crews install CAN/ULC-S705.1 2 lb closed-cell spray foam + 18-mil IFTI DC315 thermal barrier on the insulated concrete soffits while our SFRM pump crews apply 22 lb Monokote Z-106 / Cafco 400 to the structural steel girders and columns (see our Structural Steel Fireproofing Guide).
Yes. When electricians, sprinkler fitters, or HVAC contractors scrape off existing fireproofing during a tenant fit-out or mechanical retrofit, municipal building inspectors and Fire Marshals will withhold occupancy until the steel is patched to its rated CAN/ULC-S101 thickness. We dispatch rapid patching crews across Toronto and the GTA to re-spray 15 lb, 22 lb, or 40 lb SFRM and provide your compliance sign-off letter.
Sprayfoam Solutions Toronto Inc. ((647) 333-3626) provides instant square-foot budget ranges + a $250 Estimate Credit in 60 seconds at spfsolutions.ca/price-chat with No Site Visit Required, or you can send structural steel schedules and architectural drawings to our commercial bid desk for a formal 24-hour line-item takeoff.
Select your Division 07 fire protection scope or GTA municipality below for local CAN/ULC-S101 and Ontario Building Code specs:






